PERGOLUX PPZS01 ZIP Screen User Guide

ZIP Screen S1 Cranck side

Disclaimer

Congratulations and thank you for choosing a PERGOLUX Sundream Pergola!
To enjoy this product for a long time as well as for your own and others’ safety, please follow the installation instructions. Before you start assembling and using the pergola, ensure that all the parts listed in the manual are delivered and intact. If you need help with the installation, you can contact us by chat, phone, e-mail or at our website.
We wish you good luck with the assembling process!

Contact:

• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]

Tools

• Electric Drill
• Philips-tip Head Bit
• Allen Key
• Measuring Tape
• Level

Parts

Mounting your ZIP-Screen on the crank side

You wont need brackets Ⓛ when mounting the PERGOLUX ZIP-Screen on the crank side (Version B).
The screen will be mounted pointing towards the inside of your pergola.

Mounting your PERGOLUX ZIP-Screen on the crank

side compared to other sides
When you mount your ZIP-Screen on the side of the crank attache it pointing toward the inside of the pergola.
See the photos above as an example.
Press “Next” to follow the Step-by-step instruction.

Step 1
Make sure that the position of the ZIP-screen fabric is centered.

Step 2
If one side does not meet the size standard (20 mm), pull out the ZIP screen completely, and then adjust the fabric sideways so that it is centered.

Step 3
Unscrew the screws (M4X25) on the side track with an allen key (3mm), and then disassemble the tracks.

Step 4
Differentiate left and right sidetracks, so that the opening is facing forward.
Insert the back tracks into the ZIP-screen body.

Step 5
Install the PERGOLUX ZIP-Screen.

• Put the screen frame in a vertical position and place it on the pergola with the creen pointing towards the inside of the pergola.
• Drill holes in the pillars through the pre-existent holes in the backtrack. Use a 2mm metal drill bit.
• Fasten the backtracks with self-drilling screws (4X20).

Please note, that it is not necessary to use brackets Ⓛ in this step. The screen will also hold when solely attached to the pillars of the pergola.

Step 6
Ensure correct installation of both sidetracks.
The distance between the upper and lower ends of the tracks must be equal. Allowed error ≤ 3mm.

Step 7
Insert the zipper into the inner track, and then install the front track.
Make sure the V-shaped opening is facing upward. During this process do not tilt the track sideways, otherwise, the zipper might be damaged.

Step 8
Assemble the front track to the back track tightly, and fix with the M4X25 screws.

Step 9
Check that the PEROLUX ZIP-Screen is inside the track.
Make sure the measurements at the top, center and bottom are the same.

The assembly is now complete!

Well done!
We hope you are satisfied with the process of ordering, delivery and assembly!
We are constantly working on improving our services and are very interested in your feedback.
Finally, we wish you many wonderful moments with your new PERGOLUX product!
Sunny greetings,
your PERGOLUX Team

Contact:

• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]
• [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>