cangaroo HC304 Neron High Chair User Manual
- June 1, 2024
- CANGAROO
Table of Contents
kangaroo HC304 Neron High Chair
Product Information
Specifications
- Brand: Neron
- Model: HC304
- Compliance: EN 14988:2017+A1:2020
Product Usage Instructions
Assembly
Follow the provided assembly instructions carefully to set up the high
chair.
Safety Guidelines
Ensure that the high chair is placed on a flat, stable surface to prevent
tipping over. Always secure the child properly in the chair using the safety
harness.
Cleaning and Maintenance
Regularly clean the high chair with a mild detergent and water. Check for
any loose screws or parts and tighten them as needed.
Adjustments
Adjust the height and recline positions of the high chair according to the
child’s comfort and age.
Feeding Time
Use the high chair during feeding times to provide a safe and comfortable
space for the child to eat.
Storage
When not in use, fold the high chair for compact storage. Store it in a dry
place away from direct sunlight.
Frequently Asked Questions (FAQ)
-
Q: How do I clean the high chair?
A: Use a mild detergent and water to clean the high chair regularly. Avoid harsh chemicals that may damage the surface. -
Q: Can the high chair be used for newborns?
A: The high chair is suitable for infants and toddlers, but always ensure proper supervision and use appropriate accessories for newborns. -
Q: How do I contact customer support for further assistance?
A: For customer support, contact Cangaroo at +359 02 936 07 90 or email them at office@moni.bg.
This product is manufactured in accordance with the requirements of the Directive 2001/95 / EC “General Product Safety”, of the European Standards EN 14988: 2017+A1:2020 “Children’s high chairs – Requirements and test methods ” and the National Consumer Protection Act.
SAFETY WARNINGS
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING!
Never leave the child unattended.- Always use the restraint system.
- Falling hazard: Prevent your child from climbing on the product.
- Do not use the product unless all components are correctly fitted and adjusted.
- Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
- Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
- Do not use the product until the child can sit up unaided.
- Do not use the product if any part is broken, torn or missing.
- Keep children away when unfolding and folding the product to avoid injury.
- The product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg.
- Any additional harness other than the one provided by the manufacturer, shall comply with EN 13210.
- Always use the product on a stable, level surface.
- For high chairs equipped with more than two wheels on the legs, the parking device must always be activated when the product is used.
- Assembling, unfolding and folding the product must ONLY be done by an adult. Children should not be present during assembly, unfolding and folding of the product.
- Do not use the high chair without the tray and always make sure it is firmly mounted.
- Always provide enough, but safe, distance between the child and the tray.
- Be careful when adjusting the position of the tray, the footrest and when unfolding or folding the chair, as there is a risk of pinching your fingers.
- Use the tray always in combination with safety belts! The tray is not intended to protect the child from falling.
- Never lift, move, fold, adjust or repair the seat when there is a child in it. This can injure the child.
- Always before use, check the functioning of the locking mechanisms.
- Before placing the child in the seat, make sure that it is fully unfolded and locked in the open position and that all locking mechanisms are tightly closed! This will prevent the child from being injured by sudden folding of the chair.
ASSEMBLY AND EXPLOITATION
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only. Check the securing of the fixation after each operation.
Component parts – illustration PD
- PD.1:
1. Seat body
2. Double dining tray- PD.2:
1. Five-point seat belt
2. Non slip support frame
3. Footrest
4. Feeding tray that can be removed and washed
5. Removable and washable seat upholsteryHighchair assembly – illustration A
Follow the sequence of steps indicated in Figure A. Press both side buttons
simultaneously and open the chair legs. Pull the seat body upwards. Fix the
footrest as shown in Figure 5. A clicking sound should be heard.
Inserting, adjusting and removing the feeding tray – illustration B
- Pull the lever under the tray outwards and fix the tray in the designated places. Release the lever, then move the tray slightly until it locks into place. You will hear a clicking sound (Figure B.1).
- Place the upper tray over the bottom tray and press. The upper tray can be removed by gently pulling it with your hand (Figure B.2).
- To remove the tray, press the side buttons on the tray and remove it. The feeding tray can be hung on the rear legs of the seat – hook it onto the hooks in the rear legs (Figure B.3).
Adjusting the footrest – illustration C
- Press both buttons from both sides of the footrest and lift it up or down until the desired position.
- By simultaneously pressing the two small side buttons you can fix the footrest in any of the 3 possible length positions.
Seat height adjustment – illustration D
Press both buttons simultaneously and adjust the seat to the desired height
position. The seat has 6 levels of height adjustment, all illustrated on
figure D.
Backrest inclination adjustment – illustration E
Press the button at the back of the backrest and select one of the 4
positions, all illustrated on figure E.
Folding the highchair – illustration F
- For more compact when folding – remove the food tray and attach it to the rare legs, as shown in figure 1.
- Before folding the higchair, adjust the back of the chair and then fold the whole chair body.
- Press both side buttons simultaneously and fold the chair legs.
- Ensure that the high chair is correctly folded and locked before standing it.
Using the 5-point seat belt – illustration G:
The five-point seat belt is designed to ensure the safety of your child and
must be used at all times. To unfasten the belt, press the buckle button and
pull the fastener. To fasten the belt, insert the belt buckles at the waist
into the holes in the buckle and press until they lock. Sliding controls are
mounted on the straps and waist belt. The straps should be carefully adjusted
to the child’s comfort.
MAINTENANCE AND CLEANING
Clean only with a soft, slightly damp cloth. Regularly check fixed and moving parts for looseness, damage or breakage. Do not repair the product yourself, but contact an authorized service center or the sales agent from whom you purchased the product. Otherwise, your warranty will be void. Periodically clean the product. Do not leave the product to the harmful effects of external factors – direct sunlight, rain, snow or wind. This can damage metal and plastic parts and bleach upholstery. Store the product in a dry and ventilated place, not in dusty, damp rooms with very low or very high room temperatures.
Manufactured for Cangaroo in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90,
Website: www.cangaroo-bg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>