TECH EX-S1 Extender Instructions

: June 1, 2024
: TECH

Table of Contents

TECH EX-S1 Extender
Product Information
Description
How To Register
Technical Data
EU Declaration of conformity
CONTACTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TECH EX-S1 Extender

TECH-EX-S1-Extender-PRODUCT

Product Information

Specifications

Power supply: 230V~
Max. power consumption

FAQ

Q: Where can I find the full EU Declaration of Conformity and user manual?
- A: The full documents are available after scanning the QR code or visiting www.tech-controllers.com/manuals.

Extender EX-S1 is a device which enables the user to extend the signal range of peripheral devices to the Sinum central device. It connect’s wireless devices to system Sinum and send data to the Sinum central device via WiFi/LAN network. It is designed for mounting on a DIN rail.

Description

TECH-EX-S1-Extender-FIG-1

Power
Ethernet connection
Ethernet connection activity

Registration button
Power connector
RJ45 port

How To Register

How to register the device in the sinum system – LAN

Extender should be connected to the same network as the Sinum central device using LAN wire (RJ45). Then enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > System modules > +. Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.

How to register the device in the sinum system- WiFi

On the extender, press the registration button 1 twice, the AccessPoint mode will be activated (the power LED will flash twice cyclically). The extender broadcasts a Wi-Fi network named: EX_SX_XXXXXX that you can connect to. Then, in the device settings window, click Network Wifi selection (if the window does not appear in the browser, enter the extender’s IP address: 4.3.2.1), select the network to which the Sinum Central device is connected and enter the password. If the extender successfully connects to the selected network, the power LED will stop blinking.

Log in to the same network and enter the IP address of the Sinum Central device in the browser and connect to it. In the main panel, click the Settings

Devices > System modules > +. Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.

NOTE: Both devices must be connected to the same WiFi network. The Wifi network has a higher priority than the LAN connection (if the extender was connected in both ways).

Technical Data

Power supply: 230V ±10% /50Hz
Max. power consumption: 2W
Operation temperature: 5°C ÷ 50°C
Operation frequency: 868 MHz
Wifi: IEEE 802.11 b/g/n (2.4 GHz)
LAN: IEEE 802.3 100Mb/s

Notes

TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices, update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look. The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.

Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children. It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device etc.). The device is not water resistant.

The product may not be disposed of to household waste containers. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.

EU Declaration of conformity

Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the extender EX-S1 is compliant with Directive 2014/53/EU.

Wieprz, 01.07.2023

The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech- controllers.com/manuals