NEO SMART BLINDS RC-215 12 Channel Neo Remote Control Instructions

NEO SMART BLINDS RC-215 12 Channel Neo Remote Control

Remote control specifications

• Transmission power: 10dBm
• ASK 433.92MHz wireless transmission
• Outdoor transmission distance: 200m
• Indoor transmission distance: 35m
• Working temperature: -20°C ~ +55°C
• Battery model: CR2450

Compatible products to automate your home

Smart Controller
Control your blinds from anywhere using your phone or tablet. Voice commands are available if integrated with Amazon Alexa, Google Assistant or Siri Shortucts.

Blue Link
Local control of your motorized blinds using your phone or tablet. Set schedules to auto-mate your home. No need to connect to your Wi-fi or router.

For more information about our motors, remote controls and compatible products please visit our website. To buy one of these products, please contact your dealer.

Setting favorite positions

Once the open and close limits are set, the motor can store two favorite positions. After setting the favorite positions, hold FAVORITE 1 or FAVORITE 2 button for 2 seconds to send the motor to the favorite position 1 or 2. If you also use either Neo Smart Blinds app or Neo Smart Blinds Blue app to controll your blinds, please read the related topic in the bottom of this page.

Setting favorite position 1

1.  Use OPEN, STOP and CLOSE buttons to go to the desired favorite position 1.
2.  Press the SET+FAVORITE 1 buttons at the same time. The motor will move to confirm that the favorite position 1 was saved.

Setting favorite position 2

1.  Use OPEN, STOP and CLOSE buttons to go to the desired favorite position 2.
2.  Press the SET+ FAVORITE 2 buttons at the same time. Ihee motor will move to confirm that the favorite position 2 was saved.

Delete all remote controls

Attention: this procedure does not delete open and close limits or the favorite positions 1 and 2.

1.  Hold the HEAD button for 3 seconds, until the motor moves.
2.  Hold the HEAD button for 7 seconds, until the motor moves.

Favorite position in the Neo Smart

Blinds and Neo Smart Blinds Blue appsThe favorite position 1 and 2 are accessible to the Smart Controller through the Neo Smart Blinds app. None of the favorite positions set via remote control are accessible to the Neo Smart Blinds Blue app, however you can easily set up a favorite position in the app.

Getting to know your Neo Remote Control

• P-Press the button
• H- Hold the button for 2 seconds

Basic operation

Unless noted, all commands are sent from a remote control to a motor, and will only have effect if the remote control’s active channel has been Lpaired with the desired motor.

1. The motor will stop on button release if the limit is not yet set.
2. This command is not sent to the motor, and affects only the remote control on which it is executed.

Choosing channel

In order for a remote control to execute commands on a motor, its active channel must be paired with that motor. Use the instructions below to choose a channel, then proceed to the pairing process.

1.  Press the PREVIOUS CHANNEL or the NEXT CHANNEL buttons as many times as needed to select the desired channel to pair the motor.

Pairing process

Set remote control channel using the button on the HEAD

1.  Hold the HEAD button for 3 seconds, until the motor quickly moves.
2.  Press the SET button on the back of the remote control, the motor will move to confirm the operation.

Copy remote control channel

1.  Using a previously programmed remote control (A), hold the SET button on the back of the remote control for 3 seconds, until the motor moves.
2.  Using the new remote control (B), press SET button on the back of the remote control, motor will move to confirm the new remote/channel was paired.

Reverse direction

1.  Hold the SET button on the back of the remote control for 3 seconds. The motor quickly will to indicate the process has started.
2.  Press the PREVIOUS CHANNEL +STOP buttons at the same time, the motor will move to confirm the operation.

Setting or adjusting limits

The motor’s open and close limits are set individually.

Open limit

1.  Hold the SET + UP buttons at the same time for 3 seconds The motor will move to indicate the process to set up the open limit has started.
2.  Use OPEN and CLOSE buttons to go to the desired upper position.
3.  Press SET button on the back of the remote control, the motor will move to confirm that the new open limit position has been saved.

Close limit

1.  Hold the SET+DOWN buttons at the same time for 3 seconds. The motor will move to indicate the process to set up the close limit has started.
2.  Use OPEN and CLOSE buttons to go to the desired close position.
3.  Press SET button on the back of the remote control, the motor will move to confirm that the new close limit position has been saved.

Delete limits

1.  Hold the SET + STOP buttons at the same for 3 seconds. The motor will move to indicate the limits have been deleted.

Don’t forget to always select the correct channel of the motor you want to adjust.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>