NEO SMART BLINDS RC-206-W Remote Control User Manual

RC-206-W/RC-206-B Remote Control
User Manual Powered by Neo Smart Blinds

Getting to know your Neo Remote Control

P – Press the button
H – Hold the button for 2 seconds

Basic operation

Unless noted, all commands are sent from a remote control to a motor, and will only have effect if the remote control’s active channel has been paired with the desired motor.

channels), making it active2.

1. The motor will stop on button release if the limit is not yet set.
2. This command is not sent to the motor, and affects only the remote control on which it is executed.

Choosing a channel
In order for a remote control to execute commands on a motor, its active channel must be paired with that motor. Use the instructions below to choose a channel, then proceed to the pairing process.

1. Press the CHANNEL button as many times as needed to select the desired channel to pair the motor.

Pairing process

Set remote control channel using the button on the HEAD

1. Hold the HEAD button for 3 seconds, until the motor quickly moves.
2. Press the SET button on the back of the remote control, the motor will move to confirm the operation.

Copy remote control channel

1. Using a previously programmed remote control (A), hold the SET button on the back of the remote control for 3 seconds, until the motor quickly moves.
2. Using the new remote control (B), press SET button on the back of the remote control, the motor will move to confirm the new remote/channel was paired.

Reverse direction

1. Hold the SET button on the back of the remote control for 3 seconds. The motor will quickly move to indicate the process has started.
2. Press the CHANNEL + STOP buttons at the same time, the motor will move to confirm the operation.

Setting or adjusting limits

The motor’s open and close limits are set individually.
Open limit

1. Hold the SET + OPEN buttons at the same time for 3 seconds. The motor will move to indicate the process to set up the open limit has started.
2. Use OPEN and CLOSE buttons to go to the desired open position.
3. Press SET button on the back of the remote control, the motor will move to confirm that the new open limit position has been saved.

Close limit

1. Hold the SET + CLOSE buttons at the same time for 3 seconds. The motor will quickly move to indicate the process to set up the close limit has started.
2. Use OPEN and CLOSE buttons to go to the desired close position.
3. Press SET button on the back of the remote control, the motor will move to confirm that the new close limit position has been saved.

Delete limits

1. Hold the SET + STOP buttons at the same for 3 seconds. The motor will move to indicate the limits have been deleted.

Don’t forget to always select the correct channel of the motor you want to adjust.

Setting favorite positions

Once the open and close limits are set, the motor can store two favorite positions. After setting the favorite positions, hold FAVORITE 1 or FAVORITE 2 button for 2 seconds to send the motor to the favorite position 1 or 2. If you also use either Neo Smart Blinds app or Neo Smart Blinds Blue app to control your blinds, please read the related topic in the bottom of this page.
Setting favorite position 1

1. Use OPEN, STOP and CLOSE buttons to go to the desired favorite position 1.
2. Press the SET + FAVORITE 1 buttons at the same time. The motor will move to confirm that the favorite position 1 was saved.

Setting favorite position 2

1. Use OPEN, STOP and CLOSE buttons to go to the desired favorite position 2.
2. Press the SET + FAVORITE 2 buttons at the same time. The motor will move to confirm that the favorite position 2 was saved.

Delete all remote controls
Attention: this procedure does not delete open and close limits or the favorite positions 1 and 2.

1. Hold the HEAD button for 3 seconds, until the motor moves.
2. Hold the HEAD button for 7 seconds, until the motor moves.

Favorite position in the Neo Smart Blinds and Neo Smart Blinds Blue apps
The favorite position 1 and 2 are accessible to the Smart Controller through the Neo Smart Blinds app. None of the favorite positions set via remote control are accessible to the Neo Smart Blinds Blue app, however you can easily set up a favorite position in the app.

Remote control specifications

Transmission power: 10dBm
ASK 433.92MHz wireless transmission Outdoor transmission distance: 200m
Indoor transmission distance: 35m
Working temperature: -20°C – +55°C
Battery model: CR2450

Compatible products to automate your home
Smart Controller
Control your blinds from anywhere using your phone or tablet. Voice commands are available if integrated with Amazon Alexa, Google Assistant or Siri Shortcuts.

Blue Link
Local control of your motorized blinds using your phone or tablet. Set schedules to auto-mate your home. No need to connect to your Wi-fi or router.

For more information about our motors, remote controls and compatible products please visit our website. To buy one of these products, please contact your dealer.
neosmartblinds.com
In case of problem or doubt, please contact your dealer.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Caution:
This device complies with Industry Canada s licence-exempt RSSs. Operation is subject to the
following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Version 5.0

Documents / Resources

| NEO SMART BLINDS RC-206-W Remote Control [pdf] User Manual
2ALM6RC-206W, ALM6RC206W, RC-206-W, RC-206-B, RC-206-W Remote Control, Remote Control
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>