myFirst Headphones Airwaves Open-Ear Air User Guide

: June 1, 2024
: myFirst

Table of Contents

myFirst Headphones Airwaves Open-Ear Air
Important Safety Instructions:
OVERVIEW
IMPORTANT:
Connect
Power on and off
Calls
Controls
Charging
Speciﬁcation
Connecting the Headphones:
Resetting to Factory Settings:
Frequently Asked Questions (FAQ):
Q: How can I reset my headphones to factory settings?
Q: What should I do if my headphones are damaged?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

myFirst Headphones Airwaves Open-Ear Air

USER GUIDE

Important Safety Instructions:

Please follow these important safety instructions for proper use of the headphones:

Avoid placing the headphones near heat sources like radiators or stoves.
Do not block the ports of the headset including the charging port, LED port, and microphone.
Avoid listening at maximum volume for extended periods to protect your hearing and prolong product lifespan.
If the headset is damaged, contact customer service for assistance.

OVERVIEW

1. Multi-function button
2.Volume – / Next track
3.Volume + / Previous track
4. LED indicator
5. Charging port
6. Speaker

IMPORTANT:

Please follow the instructions for proper use. Keep the headphones away from heat sources such as radiators, hot air vents, stoves, or other heat- generating equipment. Do not block the ports of the headset, such as the charging port, LED port, and microphone. To protect your hearing and extend the lifespan of the product, it is not recommended to listen at maximum volume for extended periods of time. If the headset is damaged, please contact our customer service team for assistance.

Connect

Press and hold the multi-function button for 3 seconds. The LED indicator will turn from steady green to ﬂashing white, indicating that the headphones are in pairing mode. Select “myFirst AirWaves” from the list of available connections on your device to pair the headphones. When the pairing is successful, the LED indicator will turn white.

Power on and off

To turn the headphones on, press and hold the multi-function button for 3 seconds.
To turn the headphones off, press and hold the multi-function button for 5 seconds.

Calls

To answer an incoming call, press the multi-function button once.
To end a call, press the multi-function button once.
To decline an incoming call, press and hold the multi-function button for 2 seconds.

Controls

To play or pause, press the multi-function button once.
To skip to the next track, press and hold the “-” button for 2 seconds.
To skip to the previous track, press and hold the “+” button for 2 seconds.
To decrease volume, press the “-” button once.
To increase volume, press the “+” button once.
To activate the voice assistant, click the multi-function button three times.
To reset the headphones, turn them off and hold down the multi-function button for 8 seconds until the white indicator ﬂashes 5 times. This will reset the headphones to their factory settings.

Charging

To charge the headphones, please use the supplied charging cable. The headphones will turn Off automatically when charging. During charging, the LED indicator will be red. When the battery is fully charged, the LED indicator will turn off. Please note that the battery performance may decrease over time with repeated charging and use, as is normal for all rechargeable devices.

Speciﬁcation

Ear to ear: Width 98.5mm. Ear to neck: Length 130mm
Weight: 21.5g
Water resistant: IPX5
Sensitivity: 85±3dB
Speaker Diameter: 16.2mm
Connection distance: 10m
Battery capacity: 80mAh
Play time: 14 hours at 60% volume
Talk time: 7 hours at 60% volume
Standby time: 90 hours
Charging time: 2 hours
Charging port: Type-C
USB Charging: DC 5V

Connecting the Headphones:

To connect the headphones:

Press and hold the multi-function button for 3 seconds until the LED indicator flashes white, indicating pairing mode.
Select “myFirst AirWaves” from your device’s available connections to pair the headphones.
Upon successful pairing, the LED indicator will turn white.