myFirst CareBuds True Wireless Earbuds User Manual

myFirst CareBuds True Wireless Earbuds

Product Information

The product is designed to provide a high-quality output for the given input. It is equipped with the latest technology to ensure efficient and effective performance. The product is suitable for both personal and professional use. It works with a power supply of 6V and requires a proper power source for its functioning.

Product Usage Instructions

1. Connect the product to a suitable power source of 6V.
2. Ensure that the input device is properly connected to the product.
3. Turn on the product using the power button.
4. The product will start processing the input and provide an output.
5. In case of any issues or errors, refer to the user manual for troubleshooting steps.
6. After use, turn off the product and disconnect it from the power source.
7. Store the product in a safe and dry place to avoid any damage.

What’s in the box

1. Charging case
2. Earbuds
3. Eartips with 6 size options
4. USB-C charge cable
5. Hand lanyard
6. Anti-loss lanyard

Specifications

Each Earbud

• Dimension: 191936.65mm
• Net weight: 5g, 0.17oz
• Battery capacity: 45mAh
• Battery life: 6 hours
• Battery model: LIR1054
• Charging time: 1.5 hours
• Connection distance: 15m
• Water resistance: I PX4

Charging Case

• Dimension: 565026mm
• Net weight: 45g, 1.60oz
• Battery capacity: 400mAh
• Battery life: 25 hours
• Charging time: 1.5 hours
• USB-C charging: DC 5V
• Water resistance: I PX2

How to use

Power On
Simply remove them from the charging case. They will automatically turn on.

Power Off
Place them back in the charging case and close the lid.

Auto Power Off

The earbuds will automatically power off in the following situations:

• If they are in pairing mode and no device is connected after 5 minutes.
• If the earbuds and connected device are too far apart and no connection is made after 5 minutes in the connection and pairing mode.
• If the earbuds’ battery voltage falls below 3.2V.

Connect

To connect the earbuds to your device, follow these steps:

1. Open the charging case and remove the earbuds. They will automatically turn on and pair with each other.
2. When the blue and red lights on the earbuds flash alternately, they are ready to be paired with your device.
3. Select “myFirst CareBuds” from the list of available connections to connect the earbuds to your device.

Note:
During the pairing process, you may hear voice prompts indicating the status of the connection.

Eartip sizes (Diameter)

Fit
To ensure a proper fit and comfortable use of your earbuds, follow these steps:

1. Make sure the eartip is securely attached to the earbud and does not easily come off.
2. Gently insert the earbud into your ear, tucking it in and slightly rotating it until it fits comfortably without any pressure.

Note:
The earbuds come with small eartips already attached, but you can try using one of the 5 additional sizes of eartips included if needed. Keep in mind that your left and right ears may have different sizes and shapes, so it may be necessary to use different eartip sizes for each ear.

Controls
myFirst CareBuds allow you to control your media, and manage your calls while on the go with just a few simple gestures.

Transparency Mode

To ensure children’s safety, the transparency mode on myFirst CareBuds is automatically activated when a child is walking. The earbuds detect the child’s walking status and turn on the feature when the child is walking within 10 meters.

You can also manually turn the transparency mode on or off by taping and holding one of the earbuds for 2 seconds.

Note:

• The distance at which the function is triggered may vary based on each person’s stride.
• The transparency mode may also be activated by larger movements of the body
• The transparency mode can only be enabled while the myFirst CareBuds is turned on.

Charging

Place the earbuds in the charging case and close the lid. 90-minute charge of CareBuds in the charging case delivers up to 6 hours of listening time.

Note:
Only use a charger that can deliver SV to charge your myFirst CareBuds case. The case and earbuds can be charged at the same time.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>