elna eXplore 220 Button Sewing Foot Instructions
- June 1, 2024
- Elna
Table of Contents
elna eXplore 220 Button Sewing Foot
Product Specifications
- Product Name: Button Sewing Foot (T)
- Reference Number: 200-131-029
Product Usage Instructions
BUTTON SEWING FOOT (T)
Ref : 200-131-029
- Unthread the needle thread. Adjust the stitch width so that the needle enters both holes in the button.
- Place the button on the fabric and lower the needle by turning the handwheel so that the needle enters into the left hole in the button.
- Align the holes in the button with the foot and lower it to hold the button in place.
- Turn the handwheel to lower the needle into the right hole in the button.
- Adjust the stitch width if necessary. Rethread the machine and affi x the button with 10 stitches.
- For multi-hole buttons: Move the needle drop to the next set of holes and repeat as necessary.
- Note : Foot intended for fl at buttons only!
Machine Settings
- Stitch: Zigzag stitch
- Thread Tension: 1 – 3
- Stitch Length: 0
- Stitch Width: 3 – 5
- Feed Dog: Down or use a darning plate
Frequently Asked Questions
Q: How do I attach the button sewing foot to my machine?
A : To attach the button sewing foot, follow these steps:
- Make sure your machine is turned off.
- Remove the presser foot holder from the machine.
- Place the button sewing foot under the presser foot holder.
- Tighten the screw to secure the button sewing foot in place.
- You are now ready to sew buttons with your machine.
Q: What type of buttons can I sew with this foot?
A : The button sewing foot is designed to sew flat buttons onto fabric.
It may not be suitable for thick or uneven buttons.
Q: Can I adjust the stitch width when using the button sewing foot?
A : Yes, you can adjust the stitch width according to your preference
within the recommended range of 3 – 5.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>