elna 202-392-004 Adjustable Bias foot 7mm Instruction Manual
- May 15, 2024
- Elna
Table of Contents
elna 202-392-004 Adjustable Bias foot 7mm
Product Information
Specifications:
- Model: TAPE GUIDE FOOT (TG) for 7mm models
- Reference Number: 202-392-004
- Compatible Tape Width: Up to 20mm
Product Usage Instructions
Attaching Tape to Fabrics:
- Use this foot for attaching tape to the edge of fabrics.
- Adjust the guide to set the needle drop position and follow the tape width.
Bail:
Make sure to press the Lockout key when attaching and detaching the foot.
If your model doesn’t have a Lockout key, turn off the power switch.
Machine Settings:
- Turn the nut (1) and adjust the tape guide slider (2) for tape passage.
- Insert the tape (3) into the guide (4) and wrap it around the fabric (5).
- Attach the taping guide foot to the machine.
- Adjust the guide position using the thumbscrew (6).
Sewing Process:
Sew while guiding the fabric with your left hand and the tape (3) with your
right hand.
FAQ:
-
Q: What is the maximum tape width that can be used with this foot?
A: Up to 20mm wide tape can be used with this foot. -
Q: Can both single-fold bias tape and double-fold bias tape be used with this foot?
A: Yes, both types of bias tape can be used with this foot.
TAPE GUIDE FOOT (TG) for 7mm models
-
Ref: 202-392-004
-
Use this foot for attaching tape to the edge of fabrics.
-
The guide can be adjusted to set the needle drop position and suit tape width
Caution
- Make sure to press the Lockout key when attaching and detaching the foot.
- For models without a Lockout key, turn the power switch off when attaching and detaching the foot.
- Please refer to your machine’s instruction manual for presser foot attachment and removal information.
- Tape with a width of up to 20 mm can be used with this foot.
- Both single-fold bias tape and double-fold bias tape can be used
Machine Settings
- Stitch: Straight stitch
- Stitch length: 2 – 4
- Tape width: 5 – 20 mm
- Turn the nut (1) and adjust the tape guide slider (2) to make enough room for the tape to pass through.
- Insert the tape (3) into the guide (4). Wrap the tape (3) around the fabric (5) and attach the taping guide foot to the machine.
- Turn the nut (1) toward you until the guide matches the width of the tape.
Adjust the guide position with the thumbscrew (6). Sew while guiding the fabric with your left hand and the tape (3) with your right hand.
Elna International Corp. SA/01.2024.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>