elna 200-449-012 Clear View Quilting Foot and Guide Set Instruction Manual

elna 200-449-012 Clear View Quilting Foot and Guide Set

Product Information

Specifications:

• Product Name: Clear View Quilting Foot and Guide Set
• Reference Number: 200-449-012
• Features: Convertible set adjusts for quilting needs, clear view quilting foot, ditch quilting guide, unique oval-shaped needle hole

Product Usage Instructions

Attaching the Guide:

1. Loosen the thumbscrew (1) and insert the fork (2) of the guide under the neck of the thumbscrew.
2. Set the guide (3) alongside or at the center of the foot.
3. Tighten the thumbscrew based on the type of guide being attached.

Sewing with the 1/4 inch Seam Guide:
CAUTION: Use only with center needle position straight stitch to avoid hitting the foot.
Lower the foot and sew while guiding the fabric edge along the guide.

Sewing with the Ditch Quilting Guide:
Place the quilt layers aligning the seam line with the guide. Lower the foot and sew while guiding the seam line along the guide.
CAUTION: Use only with center needle position straight stitch to avoid hitting the foot.

FAQs:

1. Q: Can this product be used for piecing?
   A: Yes, this set can be used for piecing. Use the foot alone for 1/8 inch piecing or attach the 1/4 inch seam guide for 1/4 inch piecing.

2. Q: What needle drop positions are available for different machine models?
   A: For 7 mm width models, available needle drop positions are 3.5 to 4.5. For 5 mm width models, positions range from 2.5 to 3.5.

Convertible set adjusts for your quilting needs

• (A) Use foot al one for 1 /8 inch piecing.
• (B) Attach the 1/4 inch seam guide for 1/4 inch piecing.
• (C) Attach the ditch quilting guide for ditch quilting.

Unique oval-shaped needle hole (3( allows scant 1 /4 inch seams and metric piecing.

• Computerized machine models only. Instructions on inside of this card.

Attaching the guide

1. Loosen the thumbscrew (1) and insert the fork (2) of the guide under the neck of the thumbscrew.
2. Set the guide (3) along side (A) or at the center of (B) the foot.
3. Tighten the thumbscrew.
   • (A) 1/4 inch seam guide
   • (B) Ditch quilting guide

The red lines indicate 1/8 inch (1) and 1/4 inch(2) from the center needle position. The oval-shaped needle hale (3) allows adjustment of needle drop position for scant 1/4 inch and metric piecing*.

• Computerized machine models only.

Available needle drop positions:

• 7 mm width models: 3.5 to 4.5
• 5 mm width models: 2.5 to 3.5

The left hole (4) is a needle release hale. Do not use for sewing.

Sewing with the 1/4 inch seam guide

Place the fabric matching the top edge with the 1/4 inch line (1) and the side edge next to the guide (2)· Lower the foot and sew while guiding the fabric edge along the guide.

CAUTION
Use only with center needle position straight stitch, otherwise the needle hit the foot.

Sewing with the ditch quilting guide

Place the quilt layers aligning the seam line with the guide (1). Lower the foot and sew while guiding the seam line along the guide.

CAUTION
Use only with center needle position straight stitch, otherwise the needle hit the foot.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>