milwaukee 49162799 Reciprocating Scissor Blades Instruction Manual
- June 1, 2024
- Milwaukee
Table of Contents
milwaukee 49162799 Reciprocating Scissor Blades
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of electric shock, fire and/or serious injury, read all
safety warnings, instructions, illustrations, and specifications provided with
this product, as well as those provided with the power tool, battery pack, and
charger. Save all warnings and instructions for future reference. The term
“power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool. Blades are sharp. Wear non-slip
heavy-duty gloves to improve your grip and to protect your hands.
Removing/Installing the Blades
To remove the blades
- Remove the battery to avoid starting the tool
- Position the tool so that you are facing the underside of the blade area.
- Remove the skid plate bolt using a T30 wrench and pull the skid plate away from the tool.
- Remove the three bottom blade screws using a T30 wrench and pull the bottom blade away from the tool.
- Remove the three top blade screws using a T30 wrench and pull the top blade away from the tool.
To install the blades
- Remove the battery to avoid starting the tool.
- Position the tool so that you are facing the underside of the blade area.
- Place the top blade onto the blade mount. Install the three top blade screws using a T30 wrench to secure (tighten to about 6-7 Nm) the top blade to the blade mount.
- Place the bottom blade onto the blade mount. Install the three bottom blade screws using a T30 wrench to secure (tighten to about 6-7 Nm) the bottom blade to the blade mount.
- Place the skid plate on top of the centre of the bottom blade. Install the skid plate bolt using a T30 wrench to secure (tighten to about 18.6-20.5 Nm) the skid plate to the tool.
WARRANTY – AUSTRALIA and NEW ZEALAND
Please refer to the Australian and New Zealand warranty supplied with the tool. This warranty applies only to products sold by authorised dealers in Australia and New Zealand.
SERVICE – AUSTRALIA and NEW ZEALAND
MILWAUKEE® prides itself in producing a premium quality product that is
Nothing But Heavy DutyTM. Your satisfaction with our products is very
important to us! If you encounter any problems with the operation of this
tool, please contact your authorised MILWAUKEE® dealer. For a list of
MILWAUKEE® dealers, guarantee or service agents please contact MILWAUKEE®
Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928) (New Zealand Toll-Free
Telephone Number 0800645 928) or vis it
milwaukeetool.com.au/milwaukeetool.co.nz.
Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
26 – 40 Nina Link, Dandenong South
Victoria, 3175, Australia
Milwaukee Tool (New Zealand)
274 Church Street, Penrose
Auckland, 1061, New Zealand