Wireiess F16 Wireless Headset

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Safety Precautions:

1. Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
2. Ensure the device is operated within the recommended guidelines to prevent harmful interference.
3. Maintain a minimum distance of 0cm between the radiator and your body during operation.

Installation:

1. Place the device on a stable surface with adequate ventilation.
2. Connect the necessary cables according to the provided instructions.

Operation:

1. Power on the device using the designated power button.
2. Follow the user manual for specific instructions on device operation.

Maintenance:

1. Regularly clean the device exterior with a soft, dry cloth.
2. Avoid exposing the device to extreme temperatures or moisture.

Frequently Asked Questions (FAQ)

• Q: Can I modify the device for better performance?
  A: No, any changes not approved by the manufacturer can void your warranty and affect device operation.

• Q: Is it safe to use the device close to my body?
  A: The device should be operated with a minimum distance of 0cm between the radiator and your body as per FCC regulations.

USE WIRELESS HEADSET

• Power on: Open the charging case, and the earphones will automatically power on. (Manual power on) Press the MFB touch button for about 3 seconds.
• Power off: Put the earphones into the charging case will automatically power off. (Manual power off) Press the MFB touch button for about 5 seconds.
• Answer/hang up: Click the L or R MFB touch button for answer/ double-click the L or R MFB touch button for hang up.
• Reject:  Long press the L or R MFB touch button for about 2 seconds;
• Music play/pause: Click the L or R MFB touch button ;
• Volume +/-: Double-click the L ear MFB touch button volume – / double -click the R ear MFB touch button volume +;
• Volume increase or decrease during a call: Press and hold the MFB button on the left ear for about 1 second before the volume starts to decrease. Release the MFB button on the right ear and hold it for about 1 second before the volume starts to increase and stops;
• last /next songs: Triple-click the L ear MFB touch button (last song) / triple-click the R ear MFB touch button (next song);
• Voice switching: When the earphone is powered on and not connected, double-click the L or R MF B touch button.
• Voice Assistant: Press and hold the left and right MFB touch keys for about 3 seconds, release to enter the voice assistant, and click to exit.

PRODUCT PARAMETER

• Wireless version V5. 4
• Function: listen to music/ Voice assistant/ Voice switching
• Charging time about 1 hours
• Charging voltage DC5V
• Transmission distance about 10 meters
• The product is made of ABS material
• Supports the following agreements: A2DP/AVDTP/AVRCP/RFCOMM/HFPHSP/SPP/HID

METHOD OF APPLICATION

Safety code

1. Do not disassemble your Wireless headset at any time, because it may damage your Wireless headset or cause the battery to self-ignite. Please take the wireless headset to the designated service point for repair, or replace the battery.
2. When you drive with a Wireless headset, please follow the regulations of your country on region.
3. Aviod putting the Wireless headset in a high-temperature environment < higher than 50 ° C/122° f such as exposure to the sun, which will damage the performance of the Wireless headset and reduce the battery use life.

Don’t the Wireless headset get wet or immersed in liquid

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>