HAPPY VR M-F8 Bluetooth Headphone User Manual
- June 5, 2024
- HAPPY VR
Table of Contents
HAPPY VR M-F8 Bluetooth Headphone
Introduce
Thank you for buying and using Bluetooth headphones This manual helps you
understand how to use the Bluetooth headset before using a Bluetooth headset
Should understand mobile phone or Bluetooth function
More suitable for the right ear to wear Middle ear plugs are suitable for 90%
people to try to wear the middle ear plug
Start To Use
Press the Bluetooth headset for 8 seconds Show blue and red light alternately flash Be Careful: IThe blue light is less than the model The state of the shutdown is 8 seconds long Blue red alternately flicker to let go Search with a mobile phone Pairing button 2-3 seconds to start automatic link
How To Match
Search M-F8″And Click The Connection
Earphone Charging
Low power Headphoneflicker and voice reminding Use the charging line to access USB charging Charging State The red light blue light is full Function and Operation
NO/OFF Operation Steps
- Pair: In the state of shutdown, 6 seconds long (Blue Red Flicker )
- NO: In the state of shutdown, 3 seconds long (Blue Light Flicker)
- OFF: In the open state, 4 seconds long (Red Light Flicker) Chinese/English Speech Prompt Switch In The Boot State , Double1 second Chinese/English switching
Operation Method
Answer The Phone
Time Call ( Blue Light Flicker) Button 1 To Answer
End The Phone
Call Time Click on the start button 1 to end the call
Chinese/English Switch
Open State Click the function key in Chinese / English
Play Music
Standby Mode Click on the boot butto
Pause Music DD
Music Playback Click on the boot button stop playing
Precautions For Charging
- Use a DC5V charger like a computer’s USB port or a cell phone charger output voltage the USB port ( Formal safety certification charger )
- The red light in the charging process
- Recharging and discharging will reduce the battery performance this is a normal rechargeable battery
Product parameter
- Bluetooth Version: M-F8
- Standby Time 150OH Audio DSP
- Speech processing
- Operating Range: 5-10M Battery
- Capacity: 70mA Support
- Protocol: HFP/A2DP/AVRCP
- Weight: 4.9g
Safety Criteria
- Don’t disassemble or refit the equipment for any reason or cause the earphone to fail or burn up
- Don’t will cause damage to the equipment
- Don’t put the equipment at low temperature or too high (0°C or 45°C)In the environment
- Don’t use equipment thunderstorm in thunderstorms to cause signal interruption
- Don’t use mobile power to charge, otherwise it may cause the headset to malfunction or burn down.
- Don’t charge the charger with more than 1A, otherwise it may cause the headset to malfunction or burn down
- The above 6 points of damage are not warranted
After-Sale And Support
The product you purchased is nonhuman for failure.
Warranty Information
Warranty period: the quality warranty period of this product is: free service
for 12 months from purchase The quality of the product itself is a warranty
card Contact with dealers for free maintenance
Warranty Information
- Customer name
- Contact Number
- Contact Address
- Product Name
- Product Model
- Date Purchase
- Maintenance Date
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause hamful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult thee dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>