ARADA BK736 Rear Heat Shield Kit Instruction Manual

June 10, 2024
ARADA

BK736 Rear Heat Shield Kit Fitting Guide
Optional Accessory Instructions

Contents Of Kit

ARADA BK736 Rear Heat Shield Kit - Contents Of Kit PLEASE NOTE: All fixings are factory fitted to the appliance during manufacture.

Warnings:

IMPORTANT — Please ensure the appliance is cold and unlit before commencing fitting this accessory kit.
Please refer to the main instruction booklet, relevant to your stove, for guidance on the installation and operation of the appliance.
Please consult Health & Safety guidelines for advice on handling heavy and / or large items. When lifting, we recommend you always obtain assistance
Arada Ltd will not be responsible for any consequential or incidental loss or injury however caused.
Please note, this accessory kit can only be fitted prior to the appliance (stove) being installed and connected to the flue system, within the property.
When handling the components of the kit, it is recommended to wear suitable gloves to prevent hand injuries.
PLEASE NOTE: Images show Ecoburn S3, however procedure is the same regardless of appliance model.

Fitting Procedure:

Before starting this process, please ensure that the stove is cold and unlit
Step 1: Working on the rear of the appliance, remove the 4x screw, indicated in figure 1.ARADA BK736 Rear Heat Shield Kit - Fixing
Locations

Step 2: Take one of the mounting brackets and fix in place using 2no. Of the screws removed in step 1.
See figure 2.
Please note the orientation of the bracket.![ARADA BK736 Rear Heat Shield Kit

Fitting Procedure Continued:

Step 3: Repeat step 2 for the remaining mounting bracket.
Step 4: Take the heat shield and position the mounting slots over the corresponding lugs on each side mounting bracket. Gently engage the lugs and push down, to locate the heat shield onto the mounting brackets as shown in figure 3.
Step 5: With the heat shield fitted, please observe the revised distance to combustible materials, as stated in the instruction manual or product fiche on web site. ARADA BK736 Rear Heat Shield Kit - Heat Shield
Layout

Arada Ltd, The Fireworks, Weycroft Avenue, Axminster,
Devon, United Kingdom, EX13 5HU
Technical Help: +44 (0)1297 632052,
www.aradastoves.com
BK 736 Rev 03
Date Of Issue: 16/01/2023
PLEASE RETAIN THIS GUIDE FOR FUTURE REFERENCE
EN13240: 2011 +A2:2004
BK736 Rev 03
ISSUE DATE: 16/01/2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals