Hendi 212028 Electric Crepe Maker Instruction Manual

Hendi 212028 Electric Crepe Maker

INTRODUCTION

Read user manual and keep this with the appliance.

For indoor use

NOTE: This manual is translated from original English manual using AI and machine translations.

Technical specifications

A: Item no
B: Rated voltage and frequency
C: Rated input power
D: Temperature settings
E: Protection class (Class)
F: Waterproof protection rating
G: Dimensions
H: Net weight

Remark: Technical specification is subjected to change without prior notification.

Dear Customer,
Thank you for purchasing this Hendi appliance. Read this user manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Safety instructions

• Only use the appliance for the intended purpose it was designed for, as described in this manual.
• The manufacturer is not liable for any damage caused by incorrect operation and improper use.
• DANGER! RISK OF ELECTRIC SHOCK! Do not attempt to repair the appliance by yourself. Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.
• NEVER USE A DAMAGED APPLIANCE! Check the electrical connections and cord regularly for any damage. When damaged, disconnect the appliance from the power supply. Any repairs should only be carried out by a supplier or qualified person to avoid danger or injury.
• WARNING! When positioning the appliance, route the power cable safely if necessary to avoid unintentional pulling, being damaged, coming into contact with the heating surface, or causing a tripping hazard.
• WARNING! As long as the plug is in the socket the appliance is connected to the power supply.
• WARNING! ALWAYS switch off the appliance before disconnecting from the power supply, cleaning, maintenance or storage.
• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
• Do not touch the plug/electrical connections with wet or damp hands.
• Keep the appliance and electrical plug/connections away from water and other liquids. If the appliance falls into water, remove the power supply connections immediately. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life threatening risks.
• Connect the power supply into an easily accessible electrical outlet so you can disconnect the appliance immediately in case of emergency.
• Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
• Never carry the appliance by its cord.
• Never try to open the housing of the appliance yourself.
• Do not insert objects into the housing of the appliance.
• Never leave the appliance unattended during use.
• This appliance should be operated by trained personnel in kitchen of the restaurant, canteens or bar staff, etc.
• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
• Keep the appliance and its electrical connections out of reach of children.
• Never use accessories or any extra devices other than those supplied with the appliance or recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
• Do not operate this appliance by means of an external timer or remote-control system.
• Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.).
• Do not cover the appliance in operation.
• Do not place any objects on top of the appliance.
• Do not use the appliance near any open flames, explosive or flammable materials. Always operate the appliance on a horizontal, stable, clean, heat-resistant and dry surface.
• The appliance is not suitable for installation in an area where a water jet could be used.
• Leave a space of at least 20 cm around the appliance for ventilation during use.
• WARNING! Keep all ventilation openings on the appliance free from obstruction.

Special safety instructions

• This appliance is intended for commercial use.
• CAUTION! RISK OF BURNS! HOT SURFACES! The temperature of the accessible surfaces could be very high during use. Touch only the control panel, handles, switches, timer control knobs or temperature control knobs.
• WARNING! Fat and oil become very hot during operation. Beware of this.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Do not place any dangerous products, such as fuel, alcohol, paint, aerosol cans with a flammable propellant, flammable or explosive substances, etc. inside or near the appliance.
• DANGER! Never use old oil because it has a low flash point and is more prone to boiling. It increases the risk of fire and dangerous situations.

Intended use

• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and others working environment;
  • farm houses;
  • by clients in hotels, motels and other residential type environment;
  • bed and breakfast type environment.
• The appliance is designed for making crepe only. Any other use may lead to damage to the appliance or personal injury.
• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation

This appliance is classified as protection class I and must be connected to a protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is fitted with a power cord with grounding plug or electrical connections with grounding wire. The connections must be properly installed and grounded

Main parts of the product

(Fig.1 on page 3)

1. Temperature control
2. Power switch
3. Heating indicator
   Remark: The content of this manual applies for all listed items unless specified otherwise. The appearance may vary from the shown illustrations.

Spare parts or accessories

(Fig.2 on page 3)

4. Wooden spreader

Preparation before use

• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all accessories. In case of incomplete or damaged delivery, please contact the supplier immediately. In this case, do not use the device.
• Clean the accessories and the appliance before use (See ==> Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in the future.
• Keep the user manual for future reference.

NOTE! Due to manufacturing residues, the appliance may emit a light odor during the first few uses. This is normal and does not indicate any defect or hazard. Make sure the appliance is well ventilated.

Operating instructions

(Fig.1-2 on page 3)

• Clean the baking surface with a clean damp cloth before each use & let dry afterwards.
• Connect the power plug with a suitable electrical outlet. Turn on the switch, it will light up in green to show that it is connected to the electrical power supply.
• Start the appliance by turning the temperature control in a clockwise direction to select the required baking temperature.
• Wait for about 15 ~ 20 minutes to let the baking plate heating up to about 250-300°C (Max).
• Then, pour a small amount of crepe batter onto the baking plate with a spoon. Use a wooden spreader to spread it in circular movements.

NOTE: Moisten the wood spreader before use. This prevents the batter from sticking to the spreader.

• Allow the crepe to cook on one side until its surface is no longer liquid visibly. Use a wooden spatula or heat-resistant plastic spatula (not supplied) to lift one side of the crepe gently. The crepe should be visibly cooked, may be some in brown. In this case, the crepe is ready to be flipped.
  NOTE: When you pour the batter onto the hot baking plate, you might hear some slight cracking noise caused by difference in temperature. This is normal.
  NOTE: Do not overcook the crepe, or the texture will become rubbery. The crepe can be cooked quickly under high temperature. So, it can be flipped within about 2~3 minutes if you select a suitable temperature.

• Turn the crepe over to other side carefully. It only needs to cook on the other side for about 30 ~ 40 seconds.

• Carefully remove the crepe from the baking plate. Continue making more crepes until you ran out of batter. Do not use hand to touch the crepe as it is still hot.

• If necessary, adjust the temperature by rotating the temperature control.

• Switch OFF the appliance by rotating the temperature control anti-clockwise direction to 0°C and turn the switch off.
  ATTENTION! Disconnect the power plug when not in use. Leave the appliance to cool down completely before cleaning and storing

RESET the safety cut-out (Hi-limiter or thermal cut-out)

Please note that the RESET button is equipped with a protective cap to avoid overheat.

• Disconnect the appliance from the power supply.
• Allow the appliance to completely cool down.
• Press the RESET button of the Hi-limiter (thermal cut-out). You should hear a click sound.
• Connect to the power supply and you can use it again

Cleaning & maintenance

• ATTENTION! Always disconnect the appliance from the power supply and cool down before storage, cleaning & maintenance.
• Do not use water jet or steam cleaner for cleaning and do not push the appliance under the water as the parts will get wet and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this can adversely affect the life of the appliance and result in a dangerous situation.
• Food residues should be regularly cleaned and removed from the appliance. If the appliance is not cleaned properly, it will reduce its lifespan and may result in a dangerous condition during use.

Cleaning

• Clean the cooled exterior surface with a cloth or sponge slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned before and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or cleaning agents containing chlorine. Do not use steel wool, metallic utensils, or any sharp or pointed objects for cleaning. Do not use petrol or solvents!
• No parts are dishwasher safe.

Maintenance

• Check the operation of the appliance regularly to prevent serious accidents.
• If you see that the appliance is not working properly or that there is a problem, stop using it, switch it off and contact the supplier.
• All maintenance, installation and repair work must be carried out by specialised and authorised technicians, or recommended by the manufacturer.

Transportation and Storage

• Before storage, always make sure that the appliance has been disconnected from the power supply and completely cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could damage it.
• Do not move the appliance while it is under operation. Disconnect the appliance from power supply when moving and hold it at the bottom.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

Connected to the power supply but the power switch does not light up when it is turned on.| Power plug is not connected properly to the electrical power supply| Check again to make sure it is connected properly.
Power switch defective| Contact your supplier.
The appliance does not heat up but power switch light up| Temperature control defective| Contact your supplier.
| Heating element defective|

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).
In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

Discarding & Environment

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

Hendi B.V.
Innovatielaan 6
6745 XW De Klomp, The Netherlands
Tel: +31 317 681 040
Email: info@hendi.eu
: Changes, printing and typesetting errors reserved.

References

• hendi.com
• hendi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>