nordlux 211200 Cody Black Wall Light Instruction Manual
- June 1, 2024
- nordlux
Table of Contents
nordlux 211200 Cody Black Wall Light
Product Specifications
- Brand: CODY
- Model: 211200
- Power: 7W
- Material: Plastic
- Color: White
- Dimensions: 20cm x 10cm x 5cm
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Insert the bulb into the fixture and secure it in place.
- Mount the fixture onto the desired surface using appropriate screws or mounting hardware.
- Connect the fixture to the power source and switch it on to test functionality.
Maintenance
Regularly clean the fixture with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals that may damage the product.
Troubleshooting
If the fixture does not turn on, check the power source and ensure the bulb is properly inserted. If issues persist, contact customer support for assistance.
SYMBOLS
- IP20: The lamp should only be installed in areas where direct contart with water cannot OCCUR
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
- Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you nurchased this product.
- General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth-blown glass its character and organic look. Always clean mouth-blown alass cold.
Frequently Asked Questions
Q: Can I use any type of bulb with this fixture?
A: No, bulbs with wattage exceeding 7W should not be used as they may cause damage to the fixture.
Q: Is this fixture suitable for outdoor use?
A: No, this fixture is designed for indoor use only and should not be exposed to outdoor elements.
Q: How do I know if the fixture is malfunctioning?
A: Signs of malfunction include flickering lights, unusual noises, or the fixture not turning on despite a functioning bulb and power source.
www.nordlux.com
Nordlux A/S • @stre Havnegade 34 • DK-9000 Aalborg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>