hama 00053398 Chipcard Reader Instruction Manual

: June 11, 2024
: Hama

Table of Contents

hama 00053398 Chipcard Reader
Product Information
Product Usage Instructions
Operating instruction
Package contents
Safety instructions
System requirements
Start-up and operation
- Care and maintenance
Warranty Disclaimer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00053398 Chipcard Reader

Product Information

Chipcard Reader

The Chipcard Reader is a device designed to read smart cards or ID cards. It comes with a chip card port and status LEDs (Power/Data) to indicate the device’s status. The product package includes the chip card reader.
The device is compatible with Mac OS 10.8 and requires suitable software to operate, which can be obtained from approved institutions like banks or local councils. The software is not included in the product.
The product comes with safety instructions, and it is essential to keep the device out of reach of children. Hama GmbH & Co KG provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and safety notes.

Product Usage Instructions

Connect the Chipcard Reader to your computer’s USB port.
Insert your smart card or ID card into the chip card port.
Install suitable software for the Chipcard Reader. You can obtain the software from approved institutions like banks or local councils. The software is not included in the product.
Follow the software instructions to operate the device.
To maintain the device, keep it clean and out of reach of children.

Operating instruction

Controls and displays

Status LEDs (Power/Data)
Chip card port

Package contents

USB 2.0 chip card reader with fixed connecting cable
USB-C Adapter
These operating instructions

Safety instructions

The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Do not drop the product and do not expose it to any major shocks.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
As with all electrical products, this device should be kept out of the reach of children.

System requirements

The chip card reader supports the following operating systems:
Windows 11 11018.1 1817
Mac OS 10.8 s

Chip card interface

Compatible with the PCISC specification
Supports Microsoft Smart Card for Windows
Supported memory chip cards: HLE4418, SLE4428, SLE4432, SLE4442, AT88SC1608, AT45D041
Smartcard (processor chip card) support: as per ISO 7816-1, 2, 3, 4; protocols T=O,
APIs: pass, PKCS#11
Card voltage supply: 1.8V13V/5V

Start-up and operation

Note — USB 1.1 compatibility

The IJS8 2.0 chip card reader is backward-compatible with USB 1.1.
No additional drivers are required. Installation takes place automatically.
To use the chip card reader, you will need a smart card or ID card as well as suitable software. The software can be obtained from your bank, your local council or other approved institutions. This software is not included in the product.
Other free or purchasable software and chip cards that allow you to use your chip card reader can be found on the Internet.
Connect the USB 2.0 chip card reader to a spare USB port on your computer.
During the data transfer, the control light lights up green.

ID function

The product supports ID cards from the countries listed above.

Please download the latest DNI driver here:

ES: https://wwww.dnielectronicoeportalDNWPRFlCons02.
PT: https://vwwautenticacao.gov.pt
BE (NL): https://eid.belgium.be/nl
BE (FR): https.weid.belgium.belfry

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.
Ensure that no water is able to enter the product.

Warranty Disclaimer

Hama GmbH 8 Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/ or safety notes.