nordlux UKES DFTP Mobile White Pendant Light Instruction Manual
- June 1, 2024
- nordlux
Table of Contents
nordlux UKES DFTP Mobile White Pendant Light
Specifications
- Number of bulbs: 3x G9 (bulbs not included)
- Max bulb size: 50x16mm
- IP Rating: IP20
- Mounting: Wall mounting screws excluded
- Class: II
- Max Wattage: 5W
Product Usage Instructions
Mounting the Lamp
- Ensure the power is switched off before proceeding.
- Securely mount the lamp using appropriate wall mounting screws (not included).
Bulb Installation
- Obtain three G9 bulbs of suitable size (50x16mm max).
- Insert the bulbs into the lamp sockets.
Electrical Connection
- Connect the lamp to the power supply, ensuring proper grounding.
- Make sure not to exceed the maximum wattage of 5W to avoid damage.
FAQ
Frequently Asked Questions
- Q: Can I use bulbs larger than the specified size?
- A: No, it is recommended to use bulbs within the specified size limit (50x16mm max) to prevent damage to the lamp.
- Q: Is it safe to mount the lamp in areas with water exposure?
- A: No, the lamp is rated IP20 and should only be installed in areas where direct contact with water cannot occur.
- Q: What class is the lamp?
- A: The lamp is Class II, meaning it has double insulation and does not require a grounding connection.
Power
Power Off
Power On
Installation Instructions
Finish
Symbols
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- The lamp is only suitable for connecting directly to the mains.
- MAX 5W: Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
- IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
Disposal
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
Maintenance
General maintenance
Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth- blown glass its character and organic look. Always clean mouth-blown glass cold.
Nordlux A/S
- Ostre Havnegade 34 • DK-9000 Aalborg
- www.dftpglobal.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>