acv B00ABGWJ2A Steering Wheel Remote Control Adapter Instruction Manual

acv B00ABGWJ2A Steering Wheel Remote Control Adapter

Product Information

Specifications:

• Product Name: Steering Wheel Remote Control Adapter
• Model Number: 42a-1254-009
• Compatible Vehicles: Citroen, Fiat, Opel, Peugeot

Product Usage Instructions

Connection Example:
For detailed information on connecting the adapter to your specific vehicle model, please visit our webshop at https://shop.acvgmbh.de. Enter the article number (42a-1254-009) in the search field to access the relevant instructions.

Disclaimer:
The information provided in this document is subject to change without notice. It is based on documented data and tests. ACv GmbH is not liable for any damages that may result from changes in vehicles (e.g., software updates, hardware replacements) due to the installation of this product.

Function of the Steering Wheel Buttons:
Refer to the documentation for detailed information on how the steering wheel buttons interact with the connected devices.

Dip Switch Settings:
To enable the steering wheel remote control functionality, you may need a device-specific control cable 42arcxxx based on the manufacturer of the connected retrofit device. The dip switch positions for supported manufacturers are provided in the documentation.

FAQ

• Q: Where can I find more information about supported vehicle models?
  A: Visit our webshop at https://shop.acvgmbh.de and enter the article number (42a-1254-009) in the search field to access detailed information.

• Q: What should I do if I encounter issues with the installation?
  A: Contact acv GmbH via phone at (02431) 9645-0 or email at [email protected] for assistance with troubleshooting installation problems.

Steering wheel remote control adapter 42a-1254-009 Vehicles Citroen, Fiat, Opel, Peugeot.

You can find detailed information about vehicle models, connections and functions in our web shop at https://shop.acvgmbh.de Enter the article number in the search field. This will take you to the article description.

Before installation

Read the instructions before installation. Technical knowledge is required to install the adapter. The installation location must be free of moisture and away from heat sources. Ensure that you use the correct tools during installation to prevent damage to the vehicle or the product. Switch off the ignition and disconnect the vehicle battery according to the factory specifications! If the vehicle battery must not be disconnected according to the factory specifications, in most cases it is sufficient to put the vehicle into sleep mode. If this does not work, the vehicle battery can be disconnected using a resistor cable.

Connection Example

DISCLAIMER

The information contained in this document may vary without notice if changes are made to the product(s). These instructions are based on documented data and tests. acv GmbH cannot be held responsible for changes in vehicles (e.g. software updates, hardware replacement) for damage that may result from the installation of this product.

Installation

Before installing the stalk adapter, the factory radio must be removed and disconnected. Please refer to the vehicle’s operating instructions/manual or consult a specialist. A connection cable/lead to the radio for the steering wheel control is also required for installation (available separately).

Please make sure you have the correct cable before proceeding.

1. Insert the 4-pin plug of the cable/lead into the socket of the stalk adapter.

2. Connect the other end of the cable/lead to the steering wheel control input on the back from the aftermarket radio.
   NOTE: Depending on the make of the aftermarket radio, this may be a 3.5 mm jack plug or a 1-cable input.
   Please refer to the installation manual of the aftermarket radio for more information. Furthermore, the dip switches on the stalk adapter must be set to the specific manufacturer/connection.

3. Connect the 12-pin plug of the supplied wiring harness to the stalk adapter.

4. Connect the ISO power/speaker plug to the retrofit radio. The Phone Mute pink function, for example, must also be connected.

5. Connect the plugs of the supplied wiring harness to the plug(s) in the vehicle.

6. Test the function and the steering wheel control before reinstalling the radio.

If the steering wheel control does not respond, please uninstall the stalk adapters and repeat the steps described above. For further help and support, please contact us directly at [email protected].

Function of the steering wheel buttons

• A. Quellenwahl, / Source
• B. Quellenwahl/ Source
• C. Vol +
• D. Vol –
• E. FM/Band
• F. Titel + / Titel – Sendersuchlauf +/-

1. Quellenwahl / Source
2. Quellenwahl / Source
3. Vol +
4. FM/Band
5. Vol –
6. Track + / Track – Sendersuchlauf + / –

Dip Switch Settings

• To use the steering wheel remote control, depending on the manufacturer of the connected retrofit device, a device-specific control cable 42arcxxx is required.
• The following table lists shows the control cables and the dip switch positions for the supported manufacturers.

Contact Us

ACV GmbH

• Straßburger Allee 10-12 41812 Erkelenz Germany
• Fon (02431) 9645-0
• Fax (02431) 9645-55
• Mail: [email protected].
• Web: www.acvgmbh.de.
• Art.-Nr.: 42a-1254-009
• Date 02/2024
• Rev: 1
• Side: 1/3

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>