Engineering 100210117 lightSTUDIO AW Mount User Manual

Engineering 100210117 light studio AW Mount

Product Information

Specifications

• Project Name: Light Studio AW Mount
• Trade Name: lightSTUDIO AW Mount
• Product Name: Light Studio AW Mount
• Item Number: 100210117
• Manufacturer: Image Engineering GmbH & Co KG
• Address: P.O. Box: Im Gleisdreieck 5 DE 50169 Kerpen
• Contact: Tel. +49 2273 99 99 10, Fax. +49 2273 99 99 1-10,
• Email: info@image-engineering.de
• Website:image-engineering.de
• Revision Index: 0001
• Revision Date: 2024-03-05

Product Usage Instructions

General Information

• Ensure proper care, maintenance, and inspection work to prolong the lifespan of the lightSTUDIO AW Mount.

Transportation and Storage

• Transportation: Handle the product with care during transportation to prevent damage.

Scope of Delivery and Identification of the Device

• Scope of Delivery: Check the contents of the package to ensure all components are included.
• Nameplate: Locate and familiarize yourself with the nameplate on the device for identification purposes.

Structure and Function

• General Overview: Understand the layout and components of the lightSTUDIO AW Mount.
• Functional Sequence: Learn how the product functions to utilize its features effectively.

FAQ (Frequently Asked Questions)

Q: How do I perform maintenance on the lightSTUDIO AW Mount?

A: To perform maintenance, refer to section 1.1 of the user manual for detailed instructions on care, maintenance, and inspection work.

Q: What should I do in case of an emergency?

A: Section 2.8 of the user manual provides information on actions to take in an emergency, including fire protection measures and first aid procedures.

About these operating instructions

• You must read these operating instructions before you operate the lightSTUDIO AW Mount for the first time or before you start any other work on the lightSTUDIO AW Mount.
• Pay particular attention to Chapter 2, “General Safety Regulations.”

General information

• These instructions are intended to make it easier to get to know the lightSTUDIO AW Mount and to use it for its intended purpose.
• The operating instructions contain important information on how to operate the lightSTUDIO AW Mount safely and properly.

Observing them will help:

• Avoid dangers
• Reduce repair costs and downtime
• Increase the reliability and service life of the product
• Everyone working on the lightSTUDIO AW Mount must read and apply these instructions.
• In addition to these operating instructions, the accident prevention and environmental protection regulations applicable in the user’s country and the place of use must also be observed.

Presentation of information

Structure of instructions

• Instructions for action are divided into:
  • Action steps
  • Results of the actions
  • Application tips for optimal use

A symbol identifies each piece of information:

| Action steps: These are numbered consecutively and must be carried out in the specified order from top to bottom.
✓| Result symbol: The text after this symbol describes the result or intermediate result of an action.
TIP:| Application tip: Additional information on optimal use of the product.

Tab. 1.1 Meaning of symbols

Structure of the warnings

Signal word| Use for …| Possible consequences if the safety instructions are not observed:
---|---|---
DANGER| Personal injury (imminent danger)| Death or serious injury!
WARNING| Personal injury (potentially dangerous situation)| Death or serious injury!
CAUTION| Personal injury| Slight or minor injuries!
NOTE| Material damage| Damage to the device and the surrounding area

Table 1.2 Warning levels

The warnings are structured as follows:

• Warning sign with signal word corresponding to warning level
• Type of hazard (description of the hazard)
• Hazard consequences (description of the consequences of the hazard)
• Averting danger (measures to prevent danger)
• DANGER! Type of hazard Consequences of danger 1. Emergency response

Warning signs

• Special warnings are provided at the relevant points. They are marked with the following symbols:
• General danger zone This sign warns of personal injury.
• If there is a clear source of danger, it is preceded by one of the following symbols.
• Hand injuries This symbol warns that hands can be crushed, pulled in, or injured.

General safety regulations

Principles

• The light studio AW Mount is intended for use with a light studio AW Head
• Before putting the appliance into operation, please carry out the checks listed in Chapter 9. Make sure that the appliance:

1. Visually, it is in perfect condition
2. Is standing stable
3. The corresponding lightSTUDIO AW Headlight variant is on the lightSTUDIO AW Mount and is secured with the fastening straps.

• The appliance is built following the state of the art and recognized safety regulations. Nevertheless, its use may pose a risk to the life and limb of the user or third parties or cause damage to the appliance and other property.

Intended use

• The lightSTUDIO AW Mount has been specially designed for the mounting and optimal use of lightSTUDIO AW Head variants as part of the lightSTUDIO AW bundle.
• This innovative mounting system offers a wide range of applications and ensures precise and secure mounting of the lightSTUDIO AW Head variants.
• a. General product description: The lightSTUDIO AW Mount is a mount for integrating lightSTUDIO AW Head variants into the lightSTUDIO AW bundle.
• Thanks to its robust construction and high-quality materials, it guarantees secure and stable mounting.
• b. Intended use: The primary function of the lightSTUDIO AW Mount is the professional mounting of lightSTUDIO AW Head variants that are part of the lightSTUDIO AW bundle.

The different variants are configured as follows:

• light studio AW Head 1AW90
• light studio AW Head 1AW95
• light studio AW Head 2AW90
• light studio AW Head 2AW95
• The lightSTUDIO AW Mount thus offers flexible and customized solutions for a wide range of applications where precise alignment and secure attachment of the lightSTUDIO AW Head variants is required.
• The appliance may only be operated indoors

Foreseeable misuse

• Install an older version of LightSTUDIO-S on it.
• Place mount on unstable floor (e.g., wobbly table)
• Do not attach the lightSTUDIO AW Head

WARNING!

• Improper use of the lightSTUDIO AW Mount Risk of injury to the user and damage to the device Only use the lightSTUDIO AW Mount as intended.

Safety regulations

• General information
  • The following organizational instructions must be observed to ensure the safe and efficient operation of the lightSTUDIO AW Mount.
• During transportation
  • a). If the lightSTUDIO AW Mount is supplied without a lightSTUDIO AW Head variant: The lightSTUDIO AW Mount should always be trans-ported by 2 people. Users can hold the lightSTU-DIO Mount by gripping it by the two walls and transporting it.
  • b). If the lightSTUDIO AW Mount is supplied with a light studio AW Head variant: Please make sure that the light studio AW Mount with the mounted light studio AW Head variant is properly and securely screwed together to ensure a stable and reliable mounting of the lightSTUDIO AW Mount – see Chapter 9.1.
  • The appliance should be placed on a stable floor to ensure safe and level support.
  • Ensure you read and follow the warnings regarding sharp edges in the operating instructions. These warnings protect against injury during the installation and handling of the lightSTUDIO AW mount.
  • WARNING! Risk of bolt injuries
• Injury due to extended bolts
  • Before transporting, make sure that the bolts are wrapped in bubble wrap, for example, to prevent injury.

WARNING!

• Falling Injury from dropping the appliance
• Only use the side-mounted handles of the corresponding lightHEAD AW variant to transport the lightSTUDIO AW mount.
• WARNING! Danger due to crushing of the hands
• Crushing fingers when putting it down
• Only use the side-mounted handles of the corresponding lightHEAD AW variant to transport the lightSTUDIO AW mount or to mount it with a lightSTUDIO AW Head variant.

Care, maintenance, and inspection work

• The device is maintenance-free.
• The lightSTUDIO AW Mount must be checked before starting work. To do this, carry out the steps in chapter 9.1.

Waste disposal

• This product has no special disposal requirements.

Safety signs

The mandatory sign is located on the side:

• Follow instructions Read the instructions carefully before operating the lightSTUDIO AW Mount.
• General warning sign Ensure that the head is securely mounted on the mount and screwed tight.
• Take care not to pinch your fingers during installa-tion.

Expansion and conversion

• Modifications to the appliance are not permitted.

Fire protection

• There are no special requirements for fire protection.

Actions in an emergency

Fire fighting

• The lightSTUDIO AW Mount does not require any special protective equipment for firefighting.
• Use a suitable fire extinguisher (class C) if the appliance catches fire.

Expected emissions

• The lightSTUDIO AW Mount does not contain any particularly hazardous substances. Therefore, no emissions are to be expected.

First-aid measures

• No serious injuries are to be expected, even in the event of a fault. Notify a first-aid responder.

Scope of delivery and identification of the device

Scope of delivery

The lightSTUDIO AW Mount is supplied fully assembled.

The following accessories are supplied:

• Partition wall around the split functionality of the lightSTUDIO AW Head variants
• Acceptance protocol
• Instructions
• light studio Chart

Type plate

Listed are:

• 1st Manufacturer + address
• 2nd Type = type designation + article number
• 3rd Serial number
• 4th Un = nominal voltage – Not relevant for this product.
• 5th Fn = Nominal frequency – Not relevant for this product.
• 6th MFG = Year of manufacture
• 7th Pn = Rated power – Not relevant for this product.
• 8th Fuse used – Not relevant for this product.
• 9th Note: For indoor use only
• 10th AN = Article number

Accessories + compatibility list

• The lightSTUDIO AW Mount is designed for use with a lightSTUDIO AW Head.
• The use of other components or other superstructures is not permitted.

Structure and function

General overview

The lightSTUDIO AW Mount is supplied fully assembled.

Functional sequence

For the function sequence of the device, please refer to the operating instructions of the corresponding lightSTUDIO AW Head variant.

Transportation and storage

Transportation

• Requirements for the installation site
  • Place the lightSTUDIO AW Mount on a stable, level surface.

CAUTION! Loss of stability

• Tipping of the appliance due to installation on an inclined or movable surface.
• The lightSTUDIO AW Mount must be set up on a flat, stable surface.

Transporting the device

• a). If the lightSTUDIO AW Mount is supplied without a lightSTUDIO AW Head variant: The lightSTUDIO AW Mount should always be transported by 2 people.
• Users can hold the lightSTU-DIO Mount by gripping it by the two walls and transporting it.
• WARNING! Risk of bolt injuries
• Injury due to extended bolts
• Before transporting, make sure that the bolts are wrapped in bubble wrap, for example, to prevent injury.
• b). If the lightSTUDIO AW Mount is supplied with a lightSTUDIO AW Head variant: If a lightSTUDIO AW Head variant is mounted before transportation, make sure that it is secured with the screw.
• Only use the side-mounted handles of the corresponding lightSTUDIO AW Head variant for transporting the lightSTUDIO lightSTUDIO AW Mountmount.

WARNING!  Falling

• Injury from dropping the appliance
• Only use the side-mounted handles of the corresponding lightHEAD AW variant to transport the lightSTUDIO AW mount.
• WARNING! Danger due to crushing of the hands
• Crushing fingers when putting it down
• Only use the side-mounted handles of the corresponding lightHEAD AW variant to transport the lightSTUDIO AW mount or to mount it with a lightSTUDIO AW Head variant.

Unpacking the machine

• The lightSTUDIO AW Mount is supplied in a wooden box.

To unpack:

1. Open the box.
2. Remove the plastic bag containing the documentation and accessories.
3. Remove the lightSTUDIO AW mount.

Storage

Requirements for the storage location

• Temperature range: 10-35°C
• Sand and dust-free environment
• Humidity: 10 ~ 95% RH, no condensation

Installation and commissioning

Installation

• The appliance may only be operated indoors.
• Place the lightSTUDIO AW Mount on a stable, level surface.
• The light studio AW Mount requires a footprint of 134 x 84 cm and an additional 15 cm of space at the rear for the connection cables and the power supply unit.

CAUTION! Loss of stability

• Tipping of the appliance due to installation on an inclined or movable surface.
• The lightSTUDIO AW Mount must be set up on a flat, stable surface.

Installation of a light studio AW Head variant

• Before commissioning, ensure a lightSTUDIO AW Head variant has been securely installed.
• See the Checking section in Chapter 9.1
• CAUTION! Danger due to crushing of the hands
• Minor injury
• With an AW lighthead version, make sure your fingers are not trapped.

Commissioning

• The lightSTUDIO AW mount is used in combination with a lightHEAD-AW variant. To use the lightHEAD-AW variant, please refer to the cor-responding operating instructions.

Operating and display elements

Control elements on the superstructure

• The device has two control elements on the lightSTUDIO AW Mount itself.
• These elements are located next to the IEC socket for the power supply unit of the mounted lightHEAD-AW version.

Help with faults or errors

• In the event of faults or malfunctions of the lightSTUDIO AW Mount, please contact the Image Engineering support team immediately.

Maintenance and inspection work for opera-tors

Control

Before starting work and commissioning, check daily that the lightSTUDIO AW Mount:

1. Visually, it is in perfect condition.
2. It stands securely on a stable base.
3. If you have purchased the mount with a matching lightSTUDIO AW Head, make sure that the device is connected to the corresponding lightSTUDIO AW Head vari-ant at five points (2x left, 2x right, and 1x front) (see Figure 6).

Care

Clean the lightSTUDIO AW Mount with a dry material if it is dirty.

Maintenance work

The lightSTUDIO AW Mount is maintenance-free.

Disposal and recycling

This product has no special disposal requirements.

Technical data

Datasheet

Overview

lightSTUDIO AW Bundle.
Compatibility| The mount is compatible with the following light studio AW light variants:

·          lightSTUDIO AW 1AW90

·          lightSTUDIO AW 1AW95

·          lightSTUDIO AW 2AW90

·          lightSTUDIO AW 2AW95

General description

the lightSTUDIO AW Head

·          18 kg with lightSTUDIO S/L Chart and without light studio AW Head light studio AW Mount

Scope of delivery| ·          light studio AW Mount User manual

• lightSTUDIO AW Mount – Acceptance protocol
• Split wall
• lightSTUDIO S/L Chart

Miscellaneous

• Terms & Conditions image-engineering.de/terms-and-conditions

Appendix

• Service addresses
  • For support requests, please contact us directly: support@image-engineering.de
• Europe
  • Image Engineering GmbH & Co KG Im Gleisdreieck 5 50169 Kerpen
  • Mon-Fri: 9:00 a.m. to 5 p.m. (CET)
  • Tel: +49 2273 99 99 1-0
  • Email: info@image-engineering.de
• USA
  • Image Engineering USA, Inc.
  • 3079 Harrison Avenue, Suite 6
  • South Lake Tahoe, CA 96150
  • Mon-Fri: 8 a.m. to 6 p.m. (CT)
  • Phone: +1 408 386 1496
  • Email:sales@image-engineering.us
• China
  • Shenzhen Image Engineering Optoelectronic Equipment Co, Ltd (IE China Subsidiary)
  • Room 1508, Chengshi Shanhai Pingji Center,
  • Pingxin North Road No.51, Pinghu Street,
  • Longgang District, Shenzhen City, China
  • Mon-Fri: 9 a.m. to 6 p.m. (CST)
  • Phone
  • +86 158 8961 9096
  • Email:leon.xiao@image-engineering.com
• Spare and wear parts
  • The lightSTUDIO AW Mount has no wearing parts.
  • Project name: lightSTUDIO AW Mount
  • Trade name: lightSTUDIO AW Mount
  • Product name: lightSTUDIO AW Mount
  • Item number: 100210117
• Manufacturer:
  • Image Engineering GmbH & Co KG
  • P.O. Box:
  • I’m Gleisdreieck 5
  • DE 50169 Kerpen
  • Tel. +49 2273 99 99 10
  • Fax. +49 2273 99 99 1-10
  • info@image-engineering.de
  • https://www.image-engineering.de/
  • Revision index: 0001
  • Revision date: 2024-03-05
  • Official user manual
    Version EN 2024-03

References

• Engineering.de Das Branchenportal für Engineering, Anbieter, Deutschland
• engineering.us - This website is for sale! - engineering Resources and Information.
• Terms & conditions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>