CFE-PVG2 Portable Solar Off-Grid Power System User Manual

CFE-PVG2 Portable Solar Off-Grid Power System

Product Information

• Product Name: CFE-PVG2 & 3
• User Manual: CFE-PVG2 & 3 User Manual
• Document Version: 01
• Release Date: 2023-06-27
• Disclaimers: None mentioned in the provided text

Product Introduction

The CFE-PVG2 & 3 is a power supply device designed for net systems. It incorporates digital design ideas and offers intelligent sine wave output, making it suitable for a wide range of loads. The product features excellent output short-circuit protection, which can withstand the impact of large current starting loads. It also includes a one-touch intelligent switch for easy operation. The CFE-PVG2 & 3 is widely used in household electric equipment, communication equipment, single-phase power equipment, industrial equipment, and more.

Characteristics

• MCU intelligent control

• Excellent performance

• Adopts power frequency transformer for pure sine wave AC
  output

• Strong capacity to handle different loads

• Excellent design for short-circuit protection, ensuring
  reliable operation

• Simple LCD display shows working status clearly

• Intelligent charge control extends battery lifespan

• Full-oriented protection for safety and reliability

• Adapts to a wide range of temperature and high altitude conditions

Panel Display Instruction

The panel of the CFE-PVG2 & 3 provides various functions and displays. Refer to the product manual for detailed instructions on panel function and product function introduction.

Product Usage Instructions

Start and Use

Operation Steps

Step One

1. Connect the loads, battery, and AC power.
2. Switch on the power button (ON) to enter the first page as shown in the provided photo.
3. The display will show all English operation information, allowing you to monitor the inverter’s running state and alarm state.
4. The buttons on the panel can be used for navigation and setting parameters. The first button is for returning, the second button is for scrolling up, the third button is for scrolling down, and the fourth button is for confirming the current setting parameter or entering the setting mode by pressing and holding for 3 seconds.

Step Two

1. Press the turn down button to enter the page as shown in the second photo.
2. This page displays PV voltage, charging current, generation power, gross generation, and MPPT module information (status, temperature, output voltage).

Step Three:

1. Press the turn down button to enter the page as shown in the third photo.
2. This page displays AC input voltage, inverter output voltage, battery voltage, battery types, output frequency, loads percentage, and inverter running temperature.

Step Four:

1. Press the DOWN button to enter the setting page as shown in the fourth photo.
2. This page allows you to set AC output voltage, frequency, AC input range, and recover to battery discharge delay time.

Step Five:

1. Press the DOWN button to enter the setting page as shown in the fifth photo.
2. This page allows you to set AC charging current, MPPT charging current, backlight, priority mode, and ECO mode.

Set Operation

Step One:

1. Press the ENTER button and hold for 3 seconds to enter the page as shown in the first photo.
2. This page allows you to adjust AC charging types (five adjustable types, can switch off AC charging), PV charging types (six adjustable types, can switch off PV charging for hybrid inverters with a controller), backlight setting (Normal/ON), priority mode (ON/OFF), and ECO mode (ON/OFF).
3. PV charging types: six types can be adjustable, can switch off PV charging (only the hybrid inverter with controller);
4. Backlight setting: Normal/ ON can be adjustable;
5. Priority mode :ON/OFF can be adjustable;
6. ECO mode: ON/OFF can be adjustable.

Step Two

1. Press the ENTER and ESC buttons to enter the setting page as shown in the second photo.
2. This page allows you to adjust output voltage (200V/210V/220V/230V/240V), output frequency (50Hz/60Hz), AC input range (narrow 160VAC-260VAC/wide 130VAC-280VAC), AC transfer to battery time (10mins/30mins/60mins/120mins), and battery parameter settings.
3. Output voltage: 200V/210V/220V/230V/240V can be adjustable;
4. Output frequency: 50Hz/60Hz can be adjustable;
5. AC input range: narrow 160VAC-260VAC/ wide 130VAC-280VAC can be adjustable;
6. AC transfer to battery time:10mins/30mins/60mins/120mins can be adjustable;
7. Adjust battery parameter setting.

Disclaimers

Before use, please read the user manual of this product to ensure that it is used correctly when fully understood. After reading, please keep the user’s manual in a safe place for future reference. If you do not operate this product properly, you may cause serious injury to yourself or others, or cause damage to the product and property damage. By using this product, you are deemed to have understood, acknowledged and accepted the terms and content of this document in its entirety. Users undertake to be responsible for their own actions and all consequences arising therefrom. The company shall not be liable for all damages caused by the user’s failure to use the product in accordance with the User Manual.
The Company has the final right to interpret this document and all related documents of this product, subject to the laws and regulations. Please pay attention to the official website for the latest product information as it is subject to update, revision or termination without notice.

Product Introduction

The product is designed for power supply of net system.it uses digital design idea,intelligent sine wave output and adapts to all kinds of loads ;The design of excellent output short-circuit protection which can resist impact of large current starting loads.The design of one-touch intelligent switch for easy operation.It is widely used in household electric equipment.Communication equipment.And single-phase power equipment,industrial equipment,Ets.

Characteristics

• MCU intelligent control，excellent performance
• Adopt power frequency transformer, pure sine wave AC out put, strong capacity of different loads
• Exce lent Design For Short-Circuit Protection, Work Reliably
• Simple LCD display shows working status clearly
• Intelligent charge control can extend the life span of the battery
• Full-Oriented Protection, Safe And Reliable
• Adapt to wide range of temperature and high altitude

Panel display instruction

Panel function introduction

Product function introduction

Suggested Wire Diameter Of Connected Cable

Wire Diameter Of Cable （mm ）=Single Circuit Rated Current （ A ） /(6A/mm )

1. PVC insulated copper core wire（@70℃）.
2. Temperature is lower than 40℃.
3. If the above conditions can not be reached, please use strong cables.

Notice

• Warm:installation should be executed by qualified technicians according to the local related safety standard.
• This product is suitable for the solar modules with same voltage grade and power to charge battery.
• Do not allow terminal solar input to connect with other types of charge power, or else the controller will be damaged.
• The top and surrounding of the controller should have 2.5CM space for air circulation.
• DC output does not allow access to motor type loads, and load current is less than rated current.
• Solar components connection: press the”SOLAR SWITCH”of rear panel then the “BATTERY”lamp is lighting,The voltage and power of solar components should inside the range of charger input. The components positive connect the red terminal”S+”,then the negative connect the black terminal”S-“.The”SOLAR”lamp is lighting indicates that the solar components input is normal;When the inverter has no use for a long time and solar components have no recharging its batteries,turn down the”SOLAR SWITCH”to reduce the dissipation of batteries.
• AC loads connection:press the”ON/OFF”for three seconds,When hear the sound of buzzer release.Inverter running boot then the pointer of AC output voltage on the panel direct current output voltage of inverter.To ensure that the power of the AC load is within the range of the inverter, the power and load plugs are connected to the “OUTPUT” of the panel.

Product Specification

| | PVG 2| PVG 3
---|---|---|---

Product Information

| Product Capacity| ****

2560WH (25.6V 100AH)

| ****

2560WH (25.6V 100AH)

Certified| CE, ROHS, UL, UN3840| CE, ROHS, UL, UN3480
Product Size| 514344620mm| 514344620mm
Conversion Efficiency| ****

≥90%

| ****

≥90%

Cycle Life| 3000 times +| 3000 times +
Material| SPCC| SPCC

Output Port

| ****

AC Output

| 220~230VAC, 50HZ/60HZ 9A,

2000W(MAX)

| 220~230VAC, 50HZ/60HZ 9A,

3000W(MAX)

Usb-A Port (×2)

| QC3.0: 3.6V～6.5V@2A, .5V～ 9V@2A, 9V～

2V@1.5A(MAX=18W)

| QC3.0: 3.6V～6.5V@2A, .5V～ 9V@2A, 9V～

2V@1.5A(MAX=18W)

Usb-C Port (×2)

| QC4.0+: 5V=3A, 9V=3A, 12V=2.25A(MAX=27W)| QC4.0+: 5V=3A, 9V=3A, 12V=2.25A(MAX=27W)
PV Power| 1800W| 1800W

Input Port

| DC Input| 25.6VDC 100A (MAX)| 25.6VDC 100A (MAX)
AC Input| 190-280 VAC, 50HZ/60HZ| 190-280 VAC, 50HZ/60HZ
PV Input| 35-180VDC (MAX)| 35-180VDC (MAX)

Battery Information

| Battery Type| Lithium iron phosphate| Lithium iron phosphate

Protective Function

| Overvoltage protection, undervoltage protection, overcurrent protection, short circuit protection, temperature protection| Overvoltage protection, undervoltage protection, overcurrent protection, short circuit protection, temperature protection
Discharge Temperature| ****

-20～60℃

| ****

-20～60℃

Charge Temperature| ****

0～55℃

| ****

0～55℃

Working Humidity| ****

<90 %RH

| ****

<90 %RH

Storage Humidity| ****

<90 %RH

| ****

<90 %RH

| Size| 320235165mm| 320235165mm
---|---|---|---
Weight| 18±0.5kg| 18±0.5kg
| ****

Accessories

| Great South African Charging Cable| Great South African Charging Cable

Transportation & Storage

Transportation

Please check if any damage of the package after receiving goods. If less quantity, please notify the dealer within 7 days after goods arrived .

Open Package

Be cautious when opening package, Confirm the machine is complete with relating parts and without damage.

Storage

Machine should be stored in the clean, dry（0℃-35℃）environment.

Transportation

Machine must keep stand and transported cautiously, any fall or strong shock may spoil machine.

CF Energy Co., Ltd.

• Company Address: Intelligent Manufacturing Base , Xianyang , Shaanxi , PRC .
• Tel: (+86) 029-38367888
• Web: www.cfenergygroup.com
• E-mail:sales@cfenergygroup.com
• © 2023 CF Energy Co., Ltd. All rights reserved.Subject to change without notice. Version 1.0

References

• System srl - Management software & IT Security
• CF Energy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>