Ashdown Engineering AGM PRO-FX Compact Retro Drive Pedal User Guide
- October 30, 2023
- Ashdown Engineering
Table of Contents
Ashdown Engineering AGM PRO-FX Compact Retro Drive Pedal User Guide
THANK YOU!
FOR PURCHASING YOUR NEW PRO FX PEDAL
INTRODUCTION
The PRO FX Compact 9 volt range of effects pedals designed for guitarists and bass players by guitarists and bass players.
Designed and Engineered in the UK with Electronics Engineer Dave Green, Dave has been part of the team at Ashdown since around 2006 and has been behind many of our new products in terms of electronic design.
This range of pedals has been months in development and are some of our best sounding pedals we have ever designed.
Taking from what we have learned from the market we wanted an affordable range of pedals distinctive in looks but most importantly characterful in tone and features.
TWO BAND BOOST
Giving more control to your signal boost whether you want to boost just the
high frequencies or full band boost or a blend of both to get the desired
level in your signal chain.
Specifications
- Treble Boost – boost the High Freqs
- Full Boost – boosts everything else
- True Bypass switching
- 50mA draw
- 9 volt – Power Supply (Not Included)
Weight & Dimensions
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
VINTAGE FUZZ
Adding a vintage Fuzz tone to any guitar be it a rich meaty Les Paul or a
Tasty Tele our Vintage fuzz will put a smile on your face.
Specifications
- Fuzz – from a little to a lot
- Output – set the overall output volume of your pedal
- True Bypass switching
- 50mA draw
- 9 volt – Power Supply (Not Included)
Weight & Dimensions
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
RETRO DRIVE
With a truly British feel our retro drive pedal is bold and distinctive. Rich
in harmonics the drive echo’s of times of old when people played real amps…
Specifications
- Gain – Set the desired amount of Gain
- Output – Set the overall output volume of the pedal
- Tone – Set the tone, from thick to thin
- True Bypass switching
- 50mA draw
- 9 volt – Power Supply (Not Included)
Weight & Dimension
H: 58mm (Inc Pots) – 2.2”
W: 73mm – 2.9”
D: 112mm – 4.4”
Kgs: 0.5
Lbs: 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>