eASTSKY ESWL-03 15W Wireless Charger Instruction Manual
- June 4, 2024
- eASTSKY
Table of Contents
15W Wireless Charger
Instruction Manual
Thank you very much for using this product. Please read this manual carefully before use to avoid product damage caused by improper operation.
Brief Introduction
Using 0i wireless charging technology, your Samsung or iPhone or other 01 compatible devices can be automatically identified and quickly charged when placed on the charging pad. The 15W Wireless Fast Charger comes with the following amazing features:
- Slim, compact, and portable design
- Intelligent 15W Max Fast charging
- Unique Circle LED indicator light, showing charging status
- Foreign object detection(FOD) built-in
- Silicone anti-skid pads
Product Appearance
- Type-C charging port
- Charging Zone
- LED Indicator light
- Aluminum shell
- Silicone anti-skid pad
Production Specification-)
| Product Name | Wireless Charger |
|---|---|
| Material | Plastic + Aluminum alloy |
| Product Size | 100(D)x6.5(H)mm |
| Bare Weight | 58g |
| Working Temperature | < 50°C |
| Charging Distance | 6mm |
| Transfer Efficiency | 83`)/0 |
| Input | 5V/2A,9V/2A,12V/2A (Pls kindly use QC2.0/QC3.0/PD charger) |
| Output | 5W/7.5W/10W/15W(Max) |
| Applicable Models | Compatible with Samsung Galaxy S:22/22 +/22 Ultra/21/21 |
5G/21+5G,iPhone 13 Mini /13/13 Pro/13 Pro-Max/12/12 pro, and most other 01
compatible devices
Product List| Wireless Charger x1, Charging Cable x1, Instruction x1
Operation Instruction
-
Connect the wireless charger to the power. The circle LED Indicator light turns blue and red, and it will turn off after 3 seconds when it is not charging.
-
When you put the smart device on the charging pad, the circle LED Indicator light will turn to blue breathing light while working and will turn to blue light after the device is fully charged.
-
When a key or any other metal object is placed on the charging pad, it will be detected and the circle LED Indicator light will turn to a red flashing light to remind you that a “foreign object detected”. It is a very safe wireless charger!
Note: All devices to be charged must meet QI standard
Caution
- Do not press hard or crash the product.
- Do not disassemble or reassemble it.
- Do not put the charger close to the fire, into the fire or water.
- Do not use the charger in a high temperature, high humidity, or corrosion environment.
- Do not place the charger close to a magnetic card or any other magnetic resource.
- Do not put the iron object on the charging pad.
- Keep the charger away (20cm or farther) from the implanted medical device (for example, pacemakers, implants).
- Keep the charger away from water or other liquids.
- Disconnect the charger from the power before cleaning your charger.
- Do not use the charger as a toy for children.
- Use the charger at a temperature between 0 ~ 50°C.
This wireless charger uses electromagnetic induction to charge your device. Don’t place any metal or magnetic object between your phone and charger that can cause severe overheating or damage to your charger and devices. It is highly recommended to remove your phone case before charging.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>