Aussie Traveller 3J-EDS Premium Black Electric Doorstep Instruction Manual
- June 1, 2024
- AUSSIE TRAVELLER
Table of Contents
Aussie Traveller 3J-EDS Premium Black Electric Doorstep
Product Information
Specifications
- Model: 3J-EDS
- Protection: Anti-pinch, Voltage-Protection, Central Locking Protection
- Functions for Safety and Protecting Property
- Pedal Spec Motion Spell
- Voltage: Electric Current
- Anti-Pinch Force, EDS Endurance
- Working Noise, Working Temp
- Static Bearing Capacity, Motor Protection Grade
- Vehicle Communication Interface, Surface Spraying
- H/L Temp Endurance, H/L Temp Shock
Frequently Asked Questions
- Q: What should I do if the EDS malfunctions?
- A: Consult the dealer for a solution if any malfunction occurs with the EDS.
- Q: How can I ensure safe usage of the EDS?
- A: Before driving, always check if the EDS has been properly retracted. Also, assess the surrounding conditions for safe usage.
We appreciate your fondness for our product! Please read through this manual before mounting, and keep it properly in case of re-using it someday.
Name of the Main Parts
Electric Door Step
- Fixed Supports(Left)
- Main Drive Swing Arm B
- Auxiliary Drive Swing Arm
- Pedal Supports(Left)
- Motor for EDS
- Wedge Bolt
- Fixed Supports(Right)
- Main Drive Swing Arm A
- Auxiliary Drive Swing Arm
- Pedal Supports(Right)
- Pedal
- Pedal End Cap(Right)
- Pedal End Cap(Left)
Functions & Parameters
Functions for Safety and Protecting
Protection| The Door Step will be inextensible when the vehicle is linked to
CAN/LIN signals and the driving speed is ≥8km/h; the vehicle will be unable to
be started under its own power when the EDS is extended;
---|---
Anti-Pinch| In the process of being turned on/off, the EDS will retract back
to the off/on position if the resistance ≤100N;
Voltage-Protection| When the input voltage of the EDS is <9V or >16V, it will
stop working, activating the voltage protection in case of storage battery
feeding and any damage to the EDS;
Central Locking Protection| High level signal(unlocked) of the Central Locking
Protection is the default signal. If the Central Locking line touches with the
earth line, the signal of central locking line will be turned into low level
signal(locked), retracting the EDS and locking its use.
Property Parameters
Pedal Spec | WL=230mm600mm(adjustable Length, 550mm~1100mm) |
---|---|
Motion Spell | 2.0S for the EDS extension from beginning to the fullest extent |
and 2.0S for the EDS retraction from beginning to the fullest extent
Voltage| Normal Voltage: 12V; Work Voltage: 6-12V(EDS stops working if the
voltage < 9V or >16V)
Electric Current| Non-load current of the motor: 2A; Max Instantaneous Current
≤7A; Locked Rotor Current≤30A
Anti-Pinch Force| Protect users from being pinched as the EDS
extends/retracts, with anti-pinch force≤100N
EDS Endurance| 100,000 cycles of extension and retraction without anomaly.
Working Noise| Motor noise≤50dB, overall noise≤60dB
Working Temp| Working temp range for EDS: -40℃ to 85℃
Static Bearing Capacity| Greater than 280Kg
Motor Protection Grade| Protection Grade: IP67
Vehicle Communication Interface| Communication Interface: CAN/LIN
Surface Spraying| Salt Spray Test for over 720h and no surface corrosion
detected
H/L Temp Endurance
| The machine could still perform the two states(extension/retraction) over
100 times respectively after being placed in an environment with a temp of
-40℃ for 40 hours, and then heated the environment to (+23±3)℃ and kept it
there for 4 hours.
H/L Temp Shock| The machine managed to demonstrate a smooth cycle of extension
and retraction, and qualified anti-pinch force and the noise level;
Precautions
Cautions
Please read over this manual before mounting, and perform the mounting in
strict accordance with the instructions. Keep the manual properly after
reading.
Please obey the safety warnings and cautions in case of any injury or
financial loss to the users or someone else.
Signs and corresponding Meanings
Warning
- The installation of this product should be handled by professionals as far as possible;
- The manufacturer will not take on any responsibility if the product, damaged by external forces, is refitted without express permission of the manufacturer;
- Please retract the EDS before driving the vehicle,. Otherwise, it will be potentially hazardous to drive;
- The distance of the EDS pedal and the bottom of the vehicle shell shall be ≥50mm in case the EDS pedal interferes with the vehicle shell when extending;
- The distance of the bottom position of the moving EDS pedal and the floor shall be ≥50mm in case the pedal touches the floor when extending or retracting;
- The EDS installation side on the chassis shall be guaranteed to be on the same horizontal level with the chassis, and the height error of both end of the installation side shall be ≤5mm;
- The power supply system of the vehicle shall be capable of supporting 30A current, the extension and retracting of the EDS generates Instantaneous Current of ≤7A; Locked rotor current of the EDS is <30A.
Attention
- Please consult the dealer with any solution if any malfunction occurs.
- Please check whether the EDS has been properly retracted before driving and the commencement of your journey.
- Please check the surrounding conditions as far as possible before using the EDS and guarantee a proper use of it.
Use of the EDS
Door Signal Switch and Control
Door Linked Switch| Door signal with black wires- red wires touching| Door
signal with black wires- red wires detecting| Central Locking Signal wires
connecting the earth wire
---|---|---|---
Corresponding
Function
| EDS extension| EDS retraction| EDS retraction and lock
- Please retract the EDS if you are to leave the vehicle for a long time!
EDS Extension
Info
- It’s suggested to the users not to step onto the electric pedal until it’s fully extended.
EDS Retraction
Warning: Please make sure the EDS is retracted before driving!
Installation Spec
EDS
ECU
Wiring Harness
Packing List
EDS Installation
- The installation position is right beneath the RV’s door(as shown of the image below), and is at the central position of the door’s opening.
- Diagrammatic Drawing of EDS Mounting Board(It’s suggested to install the EDS Mounting Boards as a integrated whole so as to guarantee that the EDS installation sides are all on a same horizontal level, reducing EDS errors caused by installation)
- Attention! The distance of the pedal and the bottom of the vehicle shell shall be ≥50mm in case of any interference in the EDS extension against the vehicle shell!
- Warning: The EDS should be kept align with the center of the door’s opening and the pedal should be kept horizontal;
- Line the EDS mounting holes up with the corresponding holes of the installation boards, and use M8×25 hexagon socket bolts(10 PCS) to fix the EDS on the installation boards
Materials & Tools for the Mounting
Info
- The EDS Installation Boards should be fixed at the bottom of the vehicle shell to guarantee them on the same level in case of warping after the installation.
Warning
- The ECU must be keep inside the car with a dry environment in case of malfunction caused by damp.
- Connect the Door Linked Switch after installing the EDS properly, and start the EDS testing & commissioning
➀| Power on the EDS, and wait for the completion of auto-learning| Initial Power-on and the CL Signal gets disconnected;
Open the door, waiting for the EDS to extend to the fullest extent automatically;
close the door, waiting for the EDS to retract to the fullest extent automatically;
Completing the above steps represents the completion of auto-learning;
No anti-pinch function in the process of auto-learning.
---|---|---
➁| Open & Close the door 3-5 times to check if there’s any anomaly in the
extension and retraction of the EDS;| Check if there’s any anomaly in the
linkage between the door opening and closing signals and the EDS;
➂| Step it several times after the EDS fully extended to check if any anomaly
in the installation exists| Check whether the installation is completed and if
there’s any looseness;
➃| Use a hard object to block the extension in the middle when extending the
EDS to check the anti-pinch for extension| Anti-pinch force test: the EDS will
automatically retract when it gets blocked to protect the users;
➄| Use a hard object to block the retraction in the middle when retracting the
EDS to check the anti-pinch for retraction| Anti-pinch force test: the EDS
will extend and retract again automatically when it gets blocked, and extend
and retract again(if get blocked again), and the buzzer will be buzzing in the
whole process, so as to protect the users;
➅| In-off Central Locking Signal Test| Connect the CL signal to the earth
wire, and retract the EDS, and the using function will be locked; Disconnect
the CL signal to the earth wire, and the using function will be unlocked;
Trouble Shooting
Trouble Shooting
EDS fails to move| Check whether the power voltage of the whole vehicle is
lower than 9V or more than 16V or not;
Check whether the Water-proof connector for the motor is loose or damaged;
Check whether the ECU box is exposed or damped;
EDS Anomaly| Check whether the EDS is on the same level, and whether the whole
mechanism is affected;
Anti-pinch gets triggered by mistake. Check each rotating parts of the
mechanism to see whether there’s a hard object jammed in;
Please clean the sand, mud, grass and other foreign matters on the EDS, and
apply lubricating oil on the links after cleaning;
The EDS can not extend or retract to the preset position| Check the rotating
parts of the mechanism to see whether there’s a hard object jammed in;
Please power off and re-start the EDS, and it will adjust itself to the
initial position;
Warranty Article
- The warranty period for the whole machine lasts for one year.
- Please contact the manufacturer or the dealer for repair if any defect is discovered during the warranty period.
- Paid repair and lifetime service will be offered during the warranty period if:
- The user cannot provide this Warranty Card and valid purchase evidence;
- The invoice is altered;
- The malfunction or damage is caused by accidents or improper usage;
- The malfunction or damage is caused by self-repair without the company’s permission;
- The damage is caused by the usage of power supply or voltage beyond designation;
- It is a product beyond the valid period of “Three Guarantees” that remains in service after repair;
- No other explicit or implicit guarantees(including implicit guarantees on marketability, and the reasonableness and fitness of some specific application) is made except the above-mentioned ones. The company holds no responsibility for any special, occasional or indirect damage, be it matters in regard to the contract, civil negligence or others.
- The valid period of “Three Guarantees” starts from the date of issuance of the invoice, excluding the time of repair and wait-to-repair. Repair service, changing and refunding will be offered to the customer during the valid period of “three Guarantees” by providing the invoice and the “Three Guarantees” receipt.
- Refunding, changing and repair will be offered to the customer as options within 7 days of the purchase if any malfunction happens.
- Changing and repair will be offered to the customer as options within 15 days of the purchase if any malfunction happens.
Contact of Customer Service………….
Warranty Card
Documents / Resources
|
Aussie Traveller 3J-EDS Premium Black Electric
Doorstep
[pdf] Instruction Manual
3J-EDS Premium Black Electric Doorstep, 3J-EDS, Premium Black Electric
Doorstep, Black Electric Doorstep, Electric Doorstep, Doorstep
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>