BARBERBOSS QR-2088 Men Grooming Kit Instruction Manual

June 17, 2024
BARBERBOSS

BARBERBOSS-LOGO

BARBERBOSS QR-2088 Men Grooming Kit

BARBERBOSS-QR-2088-Men-Grooming-Kit-PRODUCT

Product Composition

Each Part

BARBERBOSS-QR-2088-Men-Grooming-Kit-FIG- \(1\)

Haircut

  1. Fill a few drops of oil at each point indicated before each \ use (Figure 2)
  2. Installation/removal limit comb

This product is equipped with three limit combs for trimming hair: 0.5-2mm (length marked on the product)

BARBERBOSS-QR-2088-Men-Grooming-Kit-FIG- \(3\)

Precautions

Danger

  1. This product and its accessories are not toys. Please keep them out of reach of children to avoid danger.
  2. Do not plug or unplug the charger with wet hands. The charging cable must be protected from liquids.
  3. Please ensure that the body, charging cable and battery are dry. Do not use in the bathroom.

Warning

  1. Check the cutter head for damage or deformation before use.
  2. After charging with the charging cable, do not pull the charging cable hard.
  3. This product can only be used with the charging cable of the package and connected to the USB jack for charging. (eg: mobile phone USB charger computer)
  4. Do not charge if the charging cable is damaged.
  5. Do not use the hair clipper for other purposes than pets or haircuts.
  6. Do not force the blade against the skin.
  7. Do not use thinner, benzine, alcohol or other chemicals to clean the hair clipper.
  8. Store the hair clipper in a dry place after use. Do not store it in direct sunlight or other sources of heat.
  9. Please properly handle the packaging bag of this product to avoid accidents such as suffocation of infants and young children.
  10. Do not expose infants and children to lubricating oil.
  11. This product is not intended for persons who lack experience (including children).
  12. This product is suitable for home care and professional use.

Note

  1. Do not press heavy objects on the charging cable or use other objects to catch the charging cable to avoid damage or deformation.
  2. During use in the charging process, the hair clipper will have a slight fever, which is normal, so feel free to use it.
  3. It any abnormality or malfunction of this product is tound, please stop it immediately, please handle it according to the type of fault and contact us if necessary.

How to use

Charging

  1. Tum off the hair dipper and insert the charging cable into the hair clipper (Figure 1).

  2. Plug the USB plug into the phone charger or computer and the red charging indicator will light up.

  3. When the red light tums to blue light, charging is complete, then pull out the plug.

    • Please charge in the environment of 5 degrees Celsius to 35 degrees Celsius.
      The charging voltage of this product is 5V.

    • Charging time is about 3 hours

    • 3 hours of continuous operation after full charge

    • Used for the first time after purchase or not used for more than three months, please charge for 5 hours (activate the rechargeable battery activity). If the lithium battery is charged after fully discharged, the charging indicator light may not light up, and it will be normal after a few minutes of charging.
      « In order not to affect the service life of the product, after the battery is fully charged, unplug the charging cable and do not allow the hair clippe to continue charging for a long time.

Warning: This product can only be charged with the supplied charging cable.

Maintenance and maintenance

  1. .Clean
    • Use the cleaning brush to clear the hair in the hair clipper and the hair around the knife head (Figure 4)
    • This product is not waterproof. Please do not put product & cutter head under the tap to wash.(Figure 6)
  2. Maintenance
    • After cleaning the blade, as shown in the figure, fill in the oil at each point indicated (Figure 2).

Tip: Before and after the hair clipper is used, please drop the oil on the cutter head to avoid the cutter head becoming dull, hot and abnormal.

Tool life: The life of the tool tip depends on the frequency of use and the length of time it is used. If used twice a month for 20 minutes each time,the life expectancy of the cutter head is two years. If property maintained,the life of the cutter head will be extended. When the haircut effect is found to decrease, please replace the cutter head.

Battery life: Battery life depends on the frequency of use and the length of time it takes. If the battery is charged three times a month, the battery life is about 3 years. If not used for a long time, it is recommended to c harge the hair clipper at least once every three months to ensure battery life.

Environmental Protection and Recycling

The built-in rechargeable battery contains substances that pollute the environment. When you feel that you are disposing of this product, please remove the battery and dispose of the battery in a government regulated place or recycling unit (Figure 5).

  1. Tum on the hair clipper switch until the hair clipper stops working and drain the battery.
  2. Disassemble the hair clipper Before you remove the battery, you must turn off the switch and disconnect the power.
  3. After removing the battery, never connect the hair clipper to the charger, and be careful not to short-circuit the positive and negative terminals of the battery.

Model

BARBERBOSS-QR-2088-Men-Grooming-Kit-FIG- \(4\)

Figure

BARBERBOSS-QR-2088-Men-Grooming-Kit-FIG- \(5\)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals