ELMAG HDi 13K400 TC Induction Heater Movable Instructions
- June 1, 2024
- ELMAG
Table of Contents
INDUCTION HEATER, MOVABLE HDI 18K400 TC:
TECHNICAL FACTS
including 4.25 m induction hose package with side heating head – from 01/2022
includes free optional TIMER!
PLEASE NOTE: Device must not be transported horizontally!!!
Article Number: 58228
EAN Code: 9004853582288
Now included for a short time free of charge:
58258 | XL induction heating head complete
PRODUCT HIGHLIGHTS
HDi 13K400 TC, 16K400 TC, 18K400 TC, 21K400 TC & 23K400 TC
Powerful models up to 21 kW with 5″ touch screen, coolant temperature display, test menu & temperature level control via thermosensor.
Same application options as HDi 11K400 & HDi 16K400 but also expandable for temperature controlled heating of parts by means of an optional thermal sensor.
Test menu
– Phase voltage test
– IGBT test
– DC voltage test
– Diagnostics
– Data history
Features
– Heating power setting via touch screen
– Power display (KW)
– Coolant temperature display (C°/F)
– Temperature level adjustment (with optional external laser sensor)
Equipment
Induction hose package 4.25m
Induction heating head for lateral heating
Mobile generator
User manual / CE
SPECIFICATIONS
| Output power | 18 kW |
|---|---|
| Duty cycle at max. Power (at 20 °C) | ~60 min |
| working frequency | 15 – 30 kHz |
| inductions-hose package length | 4,25 m |
| supply cable generator | 8 m |
| choosable heat power | 5 Stages |
| thermal overload protection | Yes |
| liquid cooled | Yes |
| Hydraulic heat exchanger with fan | Yes |
| micropocessor controlled | Yes |
| voltage / phases | 400 / 3 V / ~ |
| Mains frequency | 50 Hz |
| anti-surge fuse | 30 AT |
| Degree of protection (IP) | 21 |
| coolant tank | 20 l |
| Dimensions | 550x560x1010 mm |
| Weight | 130 kg |
| connector | CEE 32A |
START UP SERVICE – ELMAG – QUALITY
Competent execution guaranteed
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting &. induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
01.04.2024
COMPRESSED AIR TECHNOLOGY | WELDING TECHNOLOGY | METAL WORKING | STONE CUTTING TECHNOLOGY | WORKSHOP TECHNOLOGY | POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>