ELMAG S25 Gear Column Drill Instructions
- June 1, 2024
- ELMAG
Table of Contents
ELMAG S25 Gear Column Drill
Product Information
Specifications
- Drilling capacity in steel: Thread cutting performance
- Mandrel holding fixture (screw mandrel)
- Speed range: Speed gradually
- Quill stroke: Column diameter
- T-slot width: Drill table lift
- Mandrel radius: Drill table revolving quill distance
- Socket quill distance table min./max.: Drilling table surface
- Motor power: Voltage
- Weight
Product Usage Instructions
Setup
Place the column drill on a stable surface with adequate space around it for operation.
Power Connection
Ensure the voltage supply matches the required voltage of the column drill. Connect the power cord to a suitable power outlet.
3. Adjustments
Set the desired speed range and adjust the drill table lift according to your drilling requirements.
Drilling Process
Secure the workpiece using the mandrel holding fixture and start the drill. Use appropriate safety gear and ensure proper alignment before drilling.
FAQ
Q: How do I maintain the column drill for optimal performance?
A: Regularly clean the drill table and lubricate moving parts as per the user manual instructions.
Q: What should I do if the drill bit gets stuck during operation?
A: Stop the drill immediately, disconnect power, and carefully remove the stuck drill bit using appropriate tools.
Q: Can this column drill be used for stone cutting?
A: This column drill is primarily designed for metalworking applications, but with suitable attachments, it can be used for light stone cutting tasks.
Article Number: 81003
EAN Code: 9004853810039
DIMENSION
TECHNICAL FACTS
- Long service life
- Extremely quiet gearbox operation
- Automatic tool ejection
- Clockwise/anticlockwise rotation as standard
- Drilling head can be swivelled 360° around the column and is height-adjustable
- High-performance tool steel spindle for extreme loads
- High-quality cast-iron rectangular table with T-slots and oil channel
- Table arm is height-adjustable and can be swivelled 360° around the column
- Hardened and ground steel drill column guarantees lasting machine stability, high precision and angular accuracy between drill and table
- B = bench/table model
PRODUCT HIGHLIGHTS
Premium quality MADE IN SWEDEN
The transmission is built with traditional methods for the highest possible
torque. Helical gears in combination with steel against reinforced fibre
material provide high efficiency, a low noise level, long service life and
virtually maintenance-free transmission.
SPECIFICATIONS
SPECIFICATIONS
drilling capacity in steel| 25 mm
thread cutting performance| M20
mandrel holding fixture (screw mandrel)| MK 3
speed range| 105 – 2900 rpm
speed gradually| 8
quill stroke| 135 mm
column diameter| 100 mm
t-slot width| M14 mm
drill table lift| 870 mm
mandrel radius| 255 mm
drill table revolving| ± 360 °
quill distance socket| 1198 mm
quill distance table min./max.| 0 – 915 mm
drilling table surface| 500×350 mm
motor power| (2-stage) 650 / 900 W
voltage| 400/50 V/Hz
Weight| 180 kg
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>