dji Mini 4 Pro Consumer Drones And Goggles Instructions
- June 1, 2024
- DJi
Table of Contents
dji Mini 4 Pro Consumer Drones And Goggles
Compatible Devices and Firmware Version Requirements
The following consumer drones can be used with DJI goggles and remote control
devices, providing a first-person view and convenient flight control
experience.
Aircraft| Compatible Goggles| Compatible Remote
Control Devices
---|---|---
• DJI Air 3
(v01.00.1200 and above)
• DJI Mini 4 Pro
(v01.00.0400 and above)
|
• DJI Goggles 3
(v01.00.0100 and above)
| • DJI RC Motion 3
(v01.00.0100 and above)
• DJI RC 2
(v02.02.0000 and above)
• DJI RC-N2
when used with DJI Air 3: (v01.00.0700 and above)
when used with DJI Mini 4 Pro: (v01.01.0300 and above)
- When using the above aircrafts with the goggles, only one remote control device is supported for flight control.
Firmware Update
Update the firmware of the aircraft, goggles, and remote control device to the
latest version before using for the first time. Otherwise, the devices cannot
be linked.
-
Updating the Aircraft and the Original Remote Controller
Link the aircraft with its original remote controller and run DJI Fly. Follow the on-screen instructions to update the firmware. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. An internet connection is required. -
Updating the Goggles and the Motion Controller (If Available)
- Make sure the aircraft is powered off while updating the goggles and motion controller (if available) to avoid interference. Power on the goggles and motion controller (if available), connect the USB-C port of the goggles to a mobile device, run DJI Fly, and select Profile > Device Management. Locate the corresponding goggles. Select Firmware Update and follow the on-screen instructions to update the firmware. Make sure the mobile device is connected to the internet during the update.
- Alternatively, the DJI Assistant 2 (Consumer Drone Series) software can be used on a computer to update the firmware of the devices separately.
- If using a non-touchscreen remote controller with the goggles and aircraft, make sure to update the DJI Fly app on your mobile device to the latest version.
Linking
Preparation before linking:
- Power on the aircraft, goggles, and remote control device (motion controller or remote controller). Power on the aircraft, the goggles, and the remote control device before linking. Make sure the devices are within 0.5 m of each other during linking. Make sure the devices are updated to the latest firmware version and have enough battery level.
- The aircraft can be controlled with only one remote control device during flight. If the aircraft has been linked with multiple remote control devices, turn off other remote control devices before linking.
- Open the goggles menu. Select Status and make sure that the aircraft model displayed at the top of the menu is correct. Otherwise, select Switch from the upper right corner of the menu and then select the correct aircraft.
Linking via the DJI Fly App (recommended)
Keep the goggles connected to the mobile device after activation. Tap
Connection Guide on DJI Fly from the mobile device and follow the on-screen
instructions to connect the aircraft
Linking via Button
- If using the combination of aircraft, goggles, and motion controller, follow the instructions below to link the aircraft with the goggles, and link the goggles with the motion controller.
- If using the combination of aircraft, goggles, and remote controller, note that as the aircraft has already been linked with the remote controller, you only need to link the aircraft with the goggles.
Link the aircraft with the goggles
- a ) Press and hold the power button on the aircraft until the battery level LEDs start to blink in sequence.
- b ) Press and hold the power button on the goggles until the goggles start to beep continuously and the battery level LEDs start to blink in sequence.
- c ) Once linking is completed, the battery level LEDs of the aircraft display the battery level, the goggles stop beeping, and image transmission can be displayed normally.
Link the goggles with the motion controller
- a ) Press and hold the power button on the goggles until the goggles start to beep continuously and the battery level LEDs start to blink in sequence.
- b ) Press and hold the power button on the motion controller until it starts to beep continuously and the battery level LEDs start to blink in sequence.
- c ) Once linking is completed, the goggles and the motion controller stop beeping and the battery level LEDs display the battery level.
Function Compatibility Information
When using the aircraft with goggles, refer to the following table for
function compatibility information.
- When using QuickTransfer, make sure that the goggles are not connected to the mobile device.
- To ensure flight safety, use the following combinations correctly, and make sure that when using one of the combinations, the devices of the other combination are powered off.
- Combination 1: Aircraft + goggles + motion controller.
- Combination 2: Aircraft + goggles + remote controller.
- Make sure to set the Aircraft Signal Lost Action in the goggles menu before takeoff. The aircraft will automatically perform the set Aircraft Signal Lost Action (Return to Home, Descend, or Hover) in the following scenarios. Make sure to pay attention to the on-screen prompts in the goggles.
- Combination 1: Aircraft + goggles + motion controller. The goggles or the motion controller is disconnected from the aircraft.
- Combination 2: Aircraft + goggles + remote controller. The remote controller is disconnected from the aircraft.
| Aircraft | Function Compatibility Information |
|---|
DJI Air 3
| 1. Camera switching, settings for gimbal parameter, manual focus, and intelligent flight modes such as SmartShots, Waypoint Flight, MasterShots, or QuickShots are not supported.
2. Only the following shooting modes are supported:
• Single shot (12MP resolution)
• Video: Normal (4K/60fps, 1080p/60fps)
3. When using the remote controller as the control device:
• Only the goggles display image transmission. DJI Fly does not display image transmission.
• The remote controller can control the recording function of the aircraft, but cannot control the recording function of the goggles. Enabling recording from the shortcut menu of the goggles will enable the aircraft and the goggles to record simultaneously.
4. When using the motion controller as the control device, head tracking is supported.
DJI Mini 4 Pro
| 1. The Portrait mode, settings for gimbal parameter, manual focus, and intelligent flight modes such as SmartShots, Waypoint Flight, MasterShots, or QuickShots are not supported.
2. Only the following shooting modes are supported:
• Single shot (12MP resolution)
• Video: Normal (4K/60fps, 1080p/60fps)
3. When using the remote controller as the control device:
• Only the goggles display image transmission. DJI Fly does not display image transmission.
• The remote controller can control the recording function of the aircraft, but cannot control the recording function of the goggles. Enabling recording from the shortcut menu of the goggles will enable the aircraft and the goggles to record simultaneously.
4. When using the motion controller as the control device, head tracking is supported.
For more information on how to use the compatible devices, refer to the user
manual of the corresponding product.
DJI is a trademark of DJI.
Copyright © 2024 DJI All Rights Reserved.