BRUDER MANNESMANN 101021532-16-2024 Percussion Drill Instruction Manual
- June 1, 2024
- Bruder Mannesmann
Table of Contents
BRUDER MANNESMANN 101021532-16-2024 Percussion Drill
Product Overview
Art-No. 12515 – Electronic Percussion Drill
Specifications
| Specification | Details |
|---|---|
| Voltage | 230-240 V~/50 Hz |
| Power | 750 W |
| No-load speed | 0 – 3,000 min-1 |
| Impact rate | 0 – 48,000 min-1 |
| Chuck capacity | 13 mm |
| Sound pressure level (LPA) | 94,1 dB(A) |
| Sound power level (LWA) | 105,1 dB(A) |
| Vibration information – Drilling | 5,839 m/s2 |
| Vibration information – Hammer drilling | 16,334 m/s2 |
| Protection class | II |
Product Usage Instructions
Before Use:
Prior to using the power tool, read and adhere to the general safety
instructions provided separately.
Description of Controls:
- Zusatzhandgriff / Bohrtiefenmesser
- Zahnkranz-Bohrfutter
- Power On/Off
- Continuous Operation
- Forward/Reverse Rotation: Control the direction by shifting it to the right or left.
- Speed Selection
- Drilling/Percussion Drilling: Adjust as needed.
Changing the Chuck:
To replace the chuck with a left-hand thread, follow the instructions
provided.
Maintenance and Care:
Regular maintenance and care are essential for optimal performance. Refer
to the manual for detailed instructions.
Important Safety Instructions
Before using power tools, read and adhere to the general safety instructions provided separately.
Control Elements Description
- Auxiliary handle / Drill depth gauge
- Keyed chuck
- On/Off switch
- Continuous operation
- Clockwise/Counter-clockwise rotation
- Speed pre-selection
- Drilling / Impact drilling
Usage Guidelines
For drilling in metal, wood, or plastic and for tightening and loosening screws. For hammer drilling in stone, move the selector switch to the hammer symbol.
Maintenance and Care
Regular maintenance is essential. Check and clean the air vents regularly. Only use original spare parts for replacements.
Environmental Protection and Disposal
Dispose of the power tool and accessories at a certified recycling center. Follow local regulations for disposal of electronic products.
2-Year Full Warranty
Mannesmann provides a 2-year warranty from the date of purchase. In case of defects, contact:
- Brüder Mannesmann Werkzeuge GmbH
- Repair Service Department
- Lempstr. 24, 42859 Remscheid, Germany
- Phone: +49 2191/37 14 71
- Fax: +49 2191/38 64 77
- Email: service@br-mannesmann.de
FAQ
How do I adjust the speed on the percussion drill?
You can adjust the speed by using the speed selection control on the tool.
What should I do if the chuck needs replacement?
Follow the provided instructions for changing the chuck, especially if it has a left-hand thread.
What should be done before using the power tool?
Read and follow the general safety instructions provided with the tool.
What is the chuck capacity of the drill?
The chuck can accommodate drill bits up to 13 mm in diameter.
Can this drill be used for hammer drilling?
Yes, move the selector switch to the hammer symbol for hammer drilling in stone.
What are the voltage and power specifications?
The drill operates on 230-240 V~/50 Hz and has a power rating of 750 W.
How should the power tool be disposed of?
Dispose of at a certified electronics recycling center in accordance with local regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>