BRUDER MANNESMANN WERKZEUGE 17735 Cordless Screwdriver Instruction Manual

Instruction manual
Cordless screwdriver Art.-No. 17735
Cordless screwdriver 3.6V
Instructions for use

General safety instructions for power tools

WARNING! Read all safety warnings, instructions, illustrations, and specifications that come with this power tool is provided! Failure to follow the instructions below can result in electric shock, cause fire and/or serious injury.
Keep all safety notices and instructions for future use!
The term “power tool” used in the safety instructions refers to corded power tools (with mains cable) or battery-operated power tools (without mains cable).

1. job security
   a) Keep your work area clean and well lit. Clutter or unlit work areas can increase lead to accidents.
   b) Do not work with the power tool in potentially explosive atmospheres that contain flammable liquids, gases or dust. Power tools produce sparks that emit dust or fumes can ignite.
   c) Keep children and other people away while using the power tool. When distracted can you lose control of the power tool.

2. Electrical safety
   a) The plug of the power tool must fit into the socket. The plug must not be in any way to be changed. Do not use adapter plugs together with safety- earthed power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   b) Avoid body contact with earthed surfaces such as pipes, radiators, stoves and refrigerators. There is an increased risk of electric shock if your body is grounded.
   c) Keep power tools away from rain or moisture. Water ingress into a power tool increases the risk of electric shock.
   d) Do not misuse the power cord to carry, hang up or use the power tool to pull the plug out of the socket. Keep the connecting cable away from heat, oil, sharp edges or moving parts. Damaged or tangled cords increase the risk of an electrical shock
   e) When working outdoors with a power tool, only use extension cords that are designed for are suitable for outdoor use. The use of an extension cord suitable for outdoor use reduces the risk of electric shock.
   f) If operating the power tool in a damp environment is unavoidable, use a earth leakage circuit breaker. The use of a residual current circuit breaker reduces the risk of an electrical shock

3. Safety of people
   a) Be alert, watch what you are doing and use common sense when working with one power tool. Do not operate power tools when tired or under the influence of drugs, alcohol or medication. A moment of inattention while using power tools can result lead to serious injuries.
   b) Wear personal protective equipment and always wear safety goggles. wearing personal protective equipment, such as a dust mask, non-slip safety shoes, hard hat or hearing protection, depending on the type and use of the power tool reduces the risk of injury.
   c) Avoid unintentional start-up. Make sure that the power tool switched off before connecting to the power supply and/or the battery, recording it or carry. If you have your finger on the switch when carrying the power tool or the power tool connecting to the power supply while it is switched on, it can lead to accidents.
   d) Remove any adjusting tools or wrenches before turning on the power tool. A tool or key that is in a rotating part of the power tool can cause injury.
   e) Avoid abnormal posture. Make sure you have a secure footing and hold it at all times Balance. This gives you better control of the power tool in unexpected situations.
   f) Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothes away from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts are recorded.
   g) If dust extraction and collection devices can be installed, these must be connected and properly closed use. Use of dust extraction can reduce dust hazards.
   h) Don’t be fooled into thinking about safety rules power tools, even if you are familiar with the power tool after frequent use. Careless action can lead to serious injuries within fractions of a second.

4. Use and care of the power tool
   a) Do not overload the power tool. Use the power tool designed for your work. With With the right power tool, you can work better and more safely in the specified power range.
   b) Do not use a power tool with a defective switch. A power tool that no longer turns on or off switched off is dangerous and must be repaired.
   c) Unplug the power cord from the outlet and/or remove a detachable battery before using Make device settings, change insert tool parts or put away the power tool. This Precaution prevents accidental starting of the power tool.
   d) Keep unused power tools out of the reach of children. Don’t let people use the device who are unfamiliar with it or have not read these instructions. Power tools are dangerous when used by inexperienced people.
   e) Maintain power tools and insert tools with care. Check for moving parts function correctly and do not jam, whether parts are broken or damaged in such a way that the function of the power tool is affected. Have damaged parts removed before using the power tool repair. Many accidents are caused by poorly maintained power tools.
   f) Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges jam less and are easier to guide.
   g) Use power tools, insert tools, etc. in accordance with these instructions. Please consider the working conditions and the work to be carried out. The use of power tools for anyone other than the intended applications can lead to dangerous situations.
   h) Keep handles and gripping surfaces dry, clean and free from oil and grease. Allow slippery grips and gripping surfaces no safe operation and control of the power tool in unforeseen situations.

5. Use and care of the cordless tool
   a) Only charge the batteries with chargers recommended by the manufacturer. Through a charger designed for a certain type of battery, there is a risk of fire if used with other batteries.
   b) Only use the batteries intended for this purpose in the power tools. The use of other batteries can result in injury and fire hazard.
   c) Keep unused battery away from paperclips, coins, keys, nails, screws or other small metal objects that can cause bridging of the contacts. A short circuit between the battery terminals may result in burns or fire.
   d) If used incorrectly, liquid may leak from the battery. Avoid contact with it. At accidental contact with water. If the liquid gets in your eyes, take extra seek medical assistance. Leaking battery fluid can cause skin irritation or burns.
   e) Do not use a damaged or modified battery. Damaged or modified batteries can behave unpredictably and result in fire, explosion or the risk of injury.
   f) Do not expose a battery to fire or excessive temperatures. fire or temperatures above 130°C cause an explosion.
   g) Follow all charging instructions and never charge the battery or cordless tool outside of the temperature range specified in the operating instructions. Improper charging or charging outside the permitted Temperature range can destroy the battery and increase the risk of fire.

6. Services
   a) Have your power tool repaired only by qualified specialists and only with original spare parts. This ensures that the safety of the power tool is maintained.
   b) Never service damaged batteries. All battery maintenance should only be performed by the manufacturer or authorized customer service points.

Keep all safety notices and instructions for future use!

Additional safety instructions for cordless screwdrivers

• When not in use, set the direction of rotation switch (4) to the middle position to prevent unintentional starting to avoid.
• Only use the supplied charger to charge the battery.
• Only use the charger indoors and do not expose it to rain or moisture out of.
• If the charger housing is damaged, have it checked and repaired by a specialist workshop repair or replace if necessary.

Device Description

1. Bit recording
2. Torque adjustment ring
3. Lock button
4. Direction of rotation switch
5. rotatable handle
6. Load control
7. Flashlight
8. Charging socket
9. Power button
10. Point light

Technical specifications

cordless screwdriver

plug charger

vibration indications

• The vibration level given in these instructions is in accordance with a standard given in EN 62841 measurement method and can be used to compare devices.
• The vibration level will change with the use of the power tool and can in sometimes exceed the value specified in these instructions. The vibration load could be underestimated if the power tool is regularly used in this way.
• Note: For an accurate estimate of vibration exposure during a specific Working period should also be taken into account the times when the device is switched off or running but not actually in use. This can reduce vibration exposure throughout Significantly reduce the working time.

Before using the battery for the first time, it must be fully charged.

• Connect the charging plug of the charger to the charging socket (8) on the cordless screwdriver.
• Plug the charger into a standard household socket with 230V~/50Hz.
• Allow the battery to charge for approx. 3.5-4 hours.
• Observe the maximum charging time in order not to damage or destroy the battery.
• After the charging process, disconnect the power pack from the power supply and the cordless screwdriver.

Battery level indicator

By pressing the operating switch (9), the charging status is indicated by three differently colored LEDs:

As soon as only the red LED lights up, the battery needs to be recharged.

Insertion of tools

• Pull the outer ring of the bit holder (1) towards the machine and put the bit holder up to the stop in the bit holder. The bit holder is locked by releasing the outer ring.
• Insert the required bit into the socket of the bit holder.
• Bits with a length of 50 mm can be inserted directly into the socket of the cordless screwdriver.

Right / left rotation

• To change the direction of rotation, stop the machine and set the switch (4) to the required position.
• Do not switch the direction of rotation while the machine is running.
• Before starting work, check whether the switch (4) is in the required position and the Turn the bit holder (1) in the right direction, otherwise the tool or the cordless screwdriver can be damaged.

Torquesetting

The cordless screwdriver is equipped with a torque setting.

• The torque can be adjusted by turning the ring (2) in order to achieve different screw-in depths from screws to to reach. The torque is all the more higher, ever greater the discontinued Number is.
• To drill, set the ring (2) to the drill symbol, which gives the highest possible torque is reached.

Operation

• Pressing the operating switch (9) activates the cordless screwdriver according to the selected Direction of rotation switched on.
• As soon as you release the switch (9), the device switches off.

llumination of the working point

• The point light (10) is switched on by pressing the operating switch (9).

Pistol shape

• Depending on the area of application, the cordless screwdriver can be switched from the pistol shape to the extended position.
• To do this, press the locking button (3) and turn the handle (5) at the same time.
• In the end position, the locking button (3) engages again.

Flashlight

• The flashlight (7) is switched on by pressing in the LED cover.
• Press cover again to turn off.

Care and Maintenance

The cordless screwdriver is maintenance-free. Periodically clean the case with a dry cloth.
Do not use cleaning agents as they can damage the housing.

2 year full guarantee

The warranty period for this device begins on the day of purchase. Please let us know the date of purchase Submission of the original proof of purchase.
We guarantee during the warranty period:

• Free elimination of any faults.
• Free replacement of any part that is defective.
• including free, professional service (i.e. free assembly by our specialists)

The prerequisite is that the error is not due to improper handling.
If you have any questions or quality problems, please contact the manufacturer directly:
Brothers Mannesmann Tools GmbH
Dept. Repair Service
Lempstr. 24
D-42859 Remscheid
+49 2191/37 14 71
+49 2191/38 64 77
service@br-mannesmann.de
Disused power tools and environmental protection

• If one day your electronic device has been used so intensively that it needs to be replaced, or you If you no longer have any use for it, you are obliged to take the electrical device to a central to be disposed of at a recycling point.
• Information about collection points for your electronic device can be obtained from your municipal authorities Disposal companies or in your municipal administration offices.
• Electronic devices contain valuable recyclable raw materials. They help to save valuable raw materials Reuse if you bring your old device to a central collection point.
• Electrical devices also contain substances which can cause harm to people and animals if not disposed of properly environment can contribute.
• The symbol of the crossed-out garbage can stands for the obligation that the marked Device of a separate collection of electrical and electronic devices for recycling must be supplied.

If you have any questions, please contact your BRÜDER-MANNESMANN dealer.

References

• Dieser Account ist zur Zeit nicht erreichbar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>