WINNERCOM NX4 PE NFC Touch Door Handle User Manual
- June 1, 2024
- Winnercom
Table of Contents
WINNERCOM NX4 PE NFC Touch Door Handle
Specifications
- Size: 148.5 x 21.3 x 26(h) mm
- Color: Black
- Weight: 54.5g
Product Information
The Winnercom NX4 PE NFC Touch Door Handle is a door handle module for Automotive applications. It features a NFC Reader and lock/unlock 2-channel capacitive touch sensor function. This module is installed inside the door handle covers and communicates with the car’s CAN network to send signals for locking/unlocking doors and controlling the Pocket light LED. It receives power from the car’s battery at all times.
Usage Instructions
- Always mount the Door handle Module before powering on the device to avoid circuit damage.
- Check the power supply before powering on the Module. Connect the Module Input Power to the connector.
Specifications Details
NFC Touch Data
- Frequency Range: 13.56MHz for NFC
- Operating Voltage: 9.0 – 16.0 Vdc (Typical 12.0 Vdc)
- Current: Max 400mA @ Operation Mode
- Operating Temperature: -30°C to 75°C
- Storage Temperature: -40°C to 85°C
Frequently Asked Questions (FAQ):
-
Q: What should I do if the door handle module is not responding?
A: If the door handle module is not responding, please check the power supply connection and ensure that the module is securely mounted before powering it on. -
Q: Can the NFC Touch Door Handle be painted in a different color?
A: It is recommended not to paint the NFC Touch Door Handle as it may affect its functionality and NFC capabilities.
WINNERCOM
www.winant.co.kr
NX4 PE NFC Touch Door Handle
User Manual
V 1.0 
Winnercom Co.,Ltd.
Introduction
- Door handle Module (DHS)
- NFC & Capacitive Touch
- Pocket Light LED
- Hi-Speed CAN
The door handle module for Automotive has a NFC Reader and lock/Unlock
2Channel Capacitive touch Sensor function.
This module is installed inside of the door handle covers and will be attached
to the outside door panel.
This module is communicated with CAN network which enables to connect to the
car network to send the signal of lock and unlock of door and Pocket light LED
On/Off control.
It receives DC power from car battery at all time.
- [Lock & NFC Sensing Area]
- [Unlockk Sensing Area]
NFC DHS Design(BOM) & Application
NFC Touch Door Handle
| ITEMS | SPECIFICATION |
|---|---|
| Size | 148.5 x 21.3 x 26(h) [mm] (Length x Width x Height) |
| Color | Black |
| Weight | 54.5(g) |
Attention
- Please always mount the Door handle Module before power on the device to avoid circuit damage
- Before power on the Module, check the power supply(Fig. 1)
- Module Input Power connect to the connector(Fig. 1)
Specifications
NFC Touch Data
Frequency Range| 13.56MHz for NFC
Operating Voltage| 9.0 ~ 16.0 [Vdc], Typical 12.0 [Vdc]
Current| Max 400mA @ Operation Mode
Operating Temp.| -30℃ ~ 75℃
Storage Temp.| -40℃ ~ 85℃
NFC maximum output power FCC/IC = 15.71 dBuV/m at 30m, CE = 10.75 dBuA/m at 10m
[ System Block Diagram ]
User Information and Instructions
FCC Part 15 Compliance information.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions :
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
- This product is compliant with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
- This product can be used in which EU members, in accordance with Article10(10) / or this product can be used in at least one EU country, in accordance with Article 10(2)
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Manufacturer information
| **** Manufacturer name | **** WINNERCOM Co., Ltd. |
|---|
Address, City:
| 158-7, Golden root-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do,
KOREA
Product name (type) :| **** Vehicle active antenna & Touch door
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>