WINNERCOM SX2 NFC Touch Door Handle User Manual
- June 10, 2024
- Winnercom
Table of Contents
WINNERCOM SX2 NFC Touch Door Handle
Introduction
- Door handle Module (DHS)
- NFC & Capacitive Touch
- Pocket Light LED
- Hi-Speed CAN
The door handle module for Automotive has a NFC Reader and lock/Unlock
2Channel Capacitive touch Sensor function. This module is installed inside of
the door handle covers and will be attached to the outside door panel. This
module is communicated with CAN network which enables to connect to the car
network to send the signal of lock and unlock of door and Pocket light LED
On/Off control. It receives DC power from car battery at all time.
NFC DHS Design(BOM) & Application
CE -NFC Touch Door Handle
| ITEMS | SPECIFICATION |
|---|---|
| Size | 146.5 x 23.3 x 19.5(h) [mm] (Length x Width x Height) |
| Color | Black |
| Weight | 76g |
| Waterproof | Polyurethane full potting inside of module. Protective of humidity |
,vibration, waterproof.
Material| Case : PA6+GF15% , ABS / PRESS : SPTE(Tin-Plating) / PCB : FR-4,
4Layer / Foam Tape : EPDM/ FPCB : Polyimide film
Attentions
- Please always mount the Door handle Module before power on the device to avoid circuit damage
- Before power on the Module, check the power supply(Fig. 1)
- Module Input Power connect to the connector(Fig. 1)
Type : 6pin Connector Sealed –
Maker & Part No : 7c,l~, HKC0G-1 2721 6P Femalei
Pin# .
| Name| Description| In/Out .| Wire Color| 1
/ 0 Level
---|---|---|---|---|---
1| V Bat(+ Vee)| Power Supply-| Power.,| RED ,|
Battery + .,
2
| L_CAN (L) ,| CAN Low Signal,| 1/0,| GREEN ,| 2.S±TBD V,
3| TOUCH_1 ••| LOCK ,| o .,|
GRAY,
|
.
4
| TOUCH_2,| UNLOCK .,| o .| PINK ,|
.
5
| L_CAN(H).| CAN High Signal ,,| 1/0,| BLUE,|
2.S±TBD V,
6
| GND,| Electric Ground,| Power,| BLACK,|
Gnd,
Specifications
NFC Touch Data
Frequency Range| 13.56MHz for NFC
Operating Voltage| 9.0 ~ 16.0 [Vdc], Typical 12.0 [Vdc]
Current| Max 400mA @ Operation Mode
Operating Temp.| -30℃ ~ 75℃
Storage Temp.| -40℃ ~ 85℃
Symbol| DC, IEC 60417-5031 (2002-10)
NFC maximum output power|
User Information and Instructions
FCC Part 15 Compliance information.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions :
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must acceptany
interference, including interference that may cause undesired operation of the
device
This product is compliant with the essential requirements and other relevant
provisions of the Directive 2014/53/EU.
– This product can be used in which EU members, in accordance with
ArticleS10(10).
– This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
Manufacturer information
| Manufacturer name | WINNERCOM Co., Ltd. |
|---|---|
| Address, City: | 158-7, Golden root-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam- |
do, KOREA
Product name (type) :| Touch door
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>