LUMUX FL500 Preparing The Luminaire Instruction Manual

LUMUX FL500 Preparing The Luminaire

Product Information

• Specifications:
  • Model: FL500-4/FL500-7/FL500-9
  • Type: LED Fixture
  • Power Cord Included
  • Mounting Plate Screw Provided
  • Fixture Mounting Plate Provided

Product Usage Instructions

• Preparing the Luminaire:
  • Before installation, ensure you have all the necessary components provided with the luminaire.
• Step 1 – Disassemble Luminaire Parts for Easy Installation:
  • Remove the Mounting Plate from the Fixture Base.
• Step 2 – Install Fixture Mounting Plate:
  • Trace hole location on the surface using the Plate, and insert Anchors (by others).
  • Place Mounting Plate and fasten using Screws (by others).
• Step 3 – Connect Fixture to a Waterproof Electrical Box:
  • Insert the Fixture Power Cord to the Cable Gland (by others).
  • Make wiring connections as per the Wire Diagram.
  • Place the J-Box cover and fasten it to the Weatherproof J-Box (by others).
• Final Installation:
  • Run the Power cord through the Mounting Plate Notch, place Fixture Base, and fasten using the provided screws.

FAQs

• Q: What should I do if I need replacement parts or additional information?
  • A: Contact or visit the manufacturer at www.lumux.net for re-lamping, replacement parts, or additional information.
• Q: How should I ensure safety during installation?
  • A: Before installing or performing any maintenance, always turn off the power supply at the circuit breaker or fuse box. Using the light switch alone is not sufficient to prevent electrical shock.

PREPARING THE LUMINAIRE

• SURFACE / GROUND MOUNT LUMINAIRE:
  • FL500-4/FL500-7/FL500-9

INSTALLATION STEP

• Step 1- Disassemble Luminaire Parts for Easy Installation:
  • a.- Remove the Mounting Plate from the Fixture Base.
• Step 2 – Install Fixture Mounting Plate:
  • a.- Trace hole location on the Surface using the Plate, and insert Anchors (by others).
  • b.- Place the Mounting Plate and fasten using Screws (by others).
• Step 3 – Install Fixture:
  • a.- Run the Power cord through the Mounting Plate Notch, place Fixture Base and fasten using the screws (provided).
  • READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION. IF YOU ARE NOT FAMILIAR WITH THE NATIONAL ELECTRICAL CODE (NEC), CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THIS LUMINAIRE.
  • WARNING.- Before installing this luminaire or doing any maintenance, turn off the power supply at the circuit breaker or fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock.
  • NOTE: To re-lamp, replacement parts or additional information, contact or visit the manufacturer at www.lumux.net.
• Step 4 – Connect Fixture to a Waterproof Electrical Box:
  • a.- Insert Fixture Power Cord to the Cable Gland (by others).
  • b.- Make wiring connections, see Wire Diagram.
  • c.- Place J-Box cover and fasten to Weatherproof J-Box (by others).
• Step 3 FINAL INSTALLATION

CONTACT

• LUMUX
• ARCHITECTURAL LIGHTING COMPANY
• Toll-Free 877- 895-5552
• www.Lumux.net.

References

• Lumux Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>