VOLLRATH 69504F Wear Ever Induction Ultra Fajita Skillet Heater User Manual
- June 13, 2024
- VOLLRATH
Table of Contents
VOLLRATH 69504F Wear Ever Induction Ultra Fajita Skillet Heater User Manual
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating and
safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the
original box and packaging. Use this packaging to ship the equipment if
repairs are needed.
Item No. 2350091-1 en Rev 06/14
Safety Precaution’s
To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.
⚠ WARNING Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the warning
is ignored.
⚠ CAUTION Caution is used to indicate the presence of a hazard that will or
can cause minor personal injury or property damage if the caution is ignored.
NOTE Note is used to notify people of installation, operation, or maintenance
information that is important but not hazard-related.
For Your Safety! These precautions should be followed at all times. Failure to
follow these precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the unit:
- Plug only into grounded electrical outlets matching the nameplate rated voltage. Each induction unit should have a separate circuit.
- Do not use an extension cord with this equipment. Do not plug this equipment into a power strip or multi-outlet power cord.
- As a precaution, persons using a pacemaker should stand back 12” (30 cm) from an operating unit. Studies have shown that the induction element will not disrupt a pacemaker.
- Keep all credit cards, driver licences and other items with a magnetic strip away from an operating unit. The unit’s magnetic field will damage the information on these strips.
- The heating surface is made of a strong, non-porous material. However, should it crack or break, stop using and immediately unplug the unit.
- Do not leave an empty pan on an operating unit.
- Unit should only be used in a flat, level position.
- Unplug unit and let it cool before cleaning or moving.
- Do not touch the cooking surface. It remains hot after the unit is turned off.
- Do not spray controls or outside of unit with liquids or cleaning agents.
- Unplug when not in use.
- Keep unit and power cord away from open flames, electric burners or excessive heat.
- Do not heat sealed cans or containers as they may explode.
- Do not operate unattended.
- Closely supervise units operating in public areas and/or around children.
- Do not operate if unit has been damaged or is malfunctioning in any way.
- Do not place any objects inside the air intake or exhaust panels.
- FCC Statement ~ This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.
Function and Purpose
This unit is intended to be used with a standard flat bottom cast iron fajita
skillet pans measuring 4-1/2″ (11.4 cm) to 10-1/4″ (26 cm) wide. This unit is
intended for use in commercial foodservice operations only. It is not intended
for household, industrial or laboratory use.
NOTE: There must be a minimum of 4″ (10 cm) between the induction range and
any surrounding surface to allow sufficient airflow around the unit. Blocking
the airflow could overheat the unit.
Installation
This unit is to be used on a flat, level surface.
NOTE: This unit is not designed to be enclosed or built into any area. There
must be a minimum of 4″ (10 cm) of space between the rear of the induction
warmer and any surrounding surface. There must be 3/4″ (2 cm) between the
bottom of the induction warmer and any surrounding surface. Sufficient airflow
must be allowed around the unit. Blocking the airflow could cause the unit to
overheat.
- Place the induction heater/warmer on a flat stable surface.
- Plug the power cord into a grounded electrical outlet with the matching nameplate rated voltage.
NOTE: Using a voltage other than the nameplate rated voltage will cause damage to the unit. Incorrect voltage, modification to the power cord or electrical components can damage unit and will void the warranty.
Operation
⚠ WARNING
Electrical Shock Hazard. Keep water and other liquids from entering the inside
of the unit. Liquid inside the unit could cause an electrical shock. If liquid
spills or boils over onto the unit, immediately unplug the unit and remove
cookware. Wipe up any liquid with a padded cloth.
-
Place the room temperature standard flat bottom cast iron fajita skillet pan in the center position of the heating surface.
NOTE: Do not drop cooking utensils or other objects onto the cooking surface. The strong, non-porous surface can break. The warranty does not cover this type of abuse. -
Press the “1”, “2” or “3” button. Then the heating cycle will begin and the preset timer will begin to countdown on the display panel (B). See Figure 1.
-
Press the OFF button to turn the unit OFF before the heating cycle has ended.
⚠ WARNING
Burn Hazard. Do not touch cookware, heating surface, food, or liquid while
heating.
Hot food and liquids can burn skin. Induction heating surfaces heat very
rapidly. Use caution when adding to pre-heated oil, liquid or other food
already in the cookware.
If the temperature of the cooking surface becomes too hot, the unit will turn
off. The display will flash “F2” to indicate the unit is in “over-heating
protection” mode. After the unit has cooled, turn the cooking surface on and
if “F2” is not displayed, then cooking can resume.
The display window should remain constant during operation. If the display is
flashing, see the TROUBLESHOOTING section in this manual. Removing cookware
will cause the unit to auto shutoff within seconds.
(A) OFF button. Press to turn unit OFF.
(B) DISPLAY panel. This displays the time remaining during the heat cycle and
displays fault codes.
(C) “1” CYCLE button. This button activates an 80 second cycle that heats a
pan to 450°F – 550°F or (232°C – 278°C).
(D) “2” CYCLE button. This button activates an 30 second cycle that heats a
pan to 300°F – 350°F or (148°C – 176°C).
(E) “3” CYCLE button. This button activates an 60 second cycle that heats a
pan to 400°F – 500°F or (204°C – 260°C).
Cleaning
To maintain the appearance and increase the service life, clean your induction range daily.
⚠ WARNING
Burn Hazard. Do not touch cookware, heating surface, food, or liquid while
heating.
Hot food and liquids can burn skin. Induction heating surfaces heat very
rapidly. Allow the heating surface to cool before handling.
⚠ WARNING
Electrical Shock Hazard. Keep water and other liquids from entering the inside
of the unit. Liquid inside the unit could cause an electrical shock. Do not
spray water or cleaning products. Liquid could contact the electrical
components and cause a short circuit or an electrical shock.
- Unplug the unit and let it completely cool.
- Wipe the unit exterior with a clean damp cloth.
- Do not use abrasive materials, scratching cleansers or souring pad to clean the unit. These can damage the finish.
- Thoroughly wipe off any mild soap or chemical cleaners. Residue could corrode the surface of the unit.
Troubleshooting
Service and Repair
There are no user serviceable parts within this appliance. To avoid serious
injury or damage, never attempt to repair the induction range or replace a
damaged power cord yourself. Do not send units directly to the Vollrath
Company. Please contact the qualified professional repair service listed
below.
VOLLRATH Induction Repair Service ·
1-800-825-6036 (USA) or
1-920-457-4851 · Email:
techservicereps@vollrathco.com
When contacting the Authorized Professional Service Center, please be ready
with the item number, model number (if applicable), serial number, and proof
of purchase showing the date the unit was purchased.
Warranty Statement for the vollrath co. l.l.c.
This warranty does not apply to products purchased for personal, family or
household use, and The Vollrath Company LLC does not offer a written warranty
to purchasers for such uses.
The Vollrath Company LLC warrants each of its products listed below against
defects in materials and workmanship for the applicable period provided below.
All other products manufactured or distributed by The Vollrath Company LLC are
warranted against defects in materials and workmanship for a period of one
year. In all cases, the warranty runs from the date of the end user’s original
purchase found on the receipt.
Ultra, Ultra Fajita, Mirage® Pro and Professional Induction Ranges The
warranty period is 2 years.
For complete warranty information, product registration and new product
announcement, visit www.vollrath.com.
www.vollrath.com
The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, Wisconsin
53081-3201 USA Main Tel: 920-457-4851
Main Fax: 920-459-6573 Service Tel:
920-457-4851 Service Fax:
920-459-5462
Vollrath Europe BV Beneluxbaan 7 5121 AD RIJEN The Netherlands +31161870005
Vollrath of China Vollrath Shanghai Trading Limited 29D, 855 South Pu Dong Road Shanghai, China 200120 Tel: 86-21-50589580
Vollrath de Mexico S. de R.L. de C.V. Periferico Sur Edificio 2-C Col. Santa Maria Tequepexpan 45601 Tlaquepaque, Jalisco Mexico Tel: (52) 333-133-6767 Tel: (52) 333-133-6769 Fax: (52) 333-133-6768