boAt IMMORTAL 141 Bluetooth Gaming Wireless Earbuds User Manual

: June 12, 2024
: Boat

Table of Contents

Package Content
Power on ( First time User)
Connection Mode
Single Earbud Usage
QUICK GUIDE ON FUNCTIONALITIES
Charging the Earbuds
Basic Functions
VOICE ASSISTANT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

boAt IMMORTAL 141 Bluetooth Gaming Wireless Earbuds User Manual

IMMORTAL 141
Get ready to immerse yourself in musical bliss with your very own pair of boAt Immortal 141 Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowl-edge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.
Instructions

Package Content

1x Charging Case
1X Type-C
1x Charging Cable
2x Pairs of Extra Earmark
1x User Manual
1x Warranty Card it
1x Catalogue
1x FAQ Card

Package Content

Power on ( First time User)

Step 1; To :witch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy our IWP'” (lnista Wake N’ Pair) technology, the earbuds power on automatically, get connected and enter the connection mode

OR

Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 secs to manually power on the earbuds. Step 2- After powering on, the earbuds enter the Connection Mode. Indicated by alternate red and blue LED flashes.

Connection Mode

Step 3 : Turn on the Bluetooth functionality on your hone/media device & can
Ste 4: Search for Immortal 141″ and pair accordingly.

Congratulations! Your earbuds are now connected successfully via Bluetooth

Note:

Pairing mode fasts for § minutes. f the paining time is missed, then you will need to Reconnect the earbuds and follow the above-mentioned procedure.
Lomotil 141 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the ‘previously connected devices in working range.

Single Earbud Usage

Step 1: Plica note that both the earbuds can be used in money mods, Use Smart / Manual Power On for switching on the desired earbud
Step 2: The collected earbud automatically enters the connection mode indicated by LED
Step 3 : Term on Bluetooth on your phone/media device and search for Immortal 147 to connect

Notes:

T0 switch to Stereo mode, simply take out the other earbud from the case. will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
You cannot skip tracks or return ta the previous tracks in Mono (single-carbic) mode

QUICK GUIDE ON FUNCTIONALITIES

3 Seconds Long touch left CTC for
3 Seconds activate voice assIstan 3 Seconds Long touch both CTCs for 3 seconds to manually power on
5 Seconds Long touch both CTCs separately for 5 seconds to manually power off.
5 Seconds Long touch both CTCs for 5 seconds to perform factory reset.
Functionalities

Charging the Earbuds

Step 1 Place insert the earbuds back inside the charging casa In correct orientation and clos the . (e LED will the sawbucks and case RGB LED will ilk or 10 2aconds, Which Indicated it in charging

Shen2 once the earbuds get fly charger in carbic LED will automatically power oft.

Note
Before using the earbuds for the irst time, It s recommended to fully charade the carbides. Also, please keep the i of the charging case closed while charging

Step: To charge the case, plug one nd of the provided cable into the case and connect the other end to a computer / wall adapter / power bank, orc Why the case i on charging, RGE LED will bs in breathing mods. \When the case gets fully charged ,that charging cake automatically switches off.

Basic Functions

Voice Assistant: Long touch the felt CTC for 3 seconds to activate default voices assistant
Answer. Sings tap CTC on either earbud to answer an incoming cal
Hang Up / Rejsct Cal. Double tap the CTC on sither sarbuci to end /
Single tap sithar sarbuct CTC to play or pauss m
Noxt Track: Wnen playing music, double tap the right sarbud’s CTC to Sipk to the next zong
Previous Track: When playing music, doubts tap the eft earbud’s CTC to return to the previous song.

Note

Volume can only bs contrarian via the media device

VOICE ASSISTANT

Step 1 Long touch the CTC on left earbud for 3 seconds to activate default smart voice assistant
Step 2. To respective voice assistant screen pops up and you may place your commands at ease Tips. You may try out the following commands.

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

BEAST” MODE

Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST” Mode Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Mode.

Made for the Gainers – By Gainers, BEAST'”” Mode reduces the latency significantly and improves the overall gaming experience

ENXTM TECH
Our ENx'” (Environmental Noise Cancellation) tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx”” as the 4x mitt are already equipped with the same and activated by default.

Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space: literally anywhere!

SMART POWER OFF

Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case In correct orientation and close the lid The earbuds automatically twitch off (and enter charging mode).

MANUAL POWER OFF
Step 1. Long touch CTC for 5 seconds (Left Si Right separately) to manually power off each earbuds.
Step 2. Once the earbuds get turned off, place them back inside the case and close the lid.

FACTORY RESET

Perform the factory reset in case you feel any difficulty while operat ng your Immortal.
‘NOTE.
Before performing reset, clear “Immortal 141” from paling device history by forget: ng device

Step 1: Take out both the earbuds from the case Step 2. Long touch CTC on both the earbuds for S seconds Step 3 Place the earbuds inside the cast dose the lid and wait for 5 seconds
Step 4- Take out the earbuds from the case and perform a fresh connection

Congratulations! Your Immortal 141 has been Reset

Headphone Type	TINS
Biuetooth Version	V5.3
Music Playtime	Up to 1OHRS per charge. Up to 30HR5 additional with Case (at

WARNING

Please follow the Instructions to operate
Please don’t use the earbuds in extreme temperatures
Please don’t use the product near water
Please keep the product away from heat sources, as the heat may damage it
Don’t Jam the ports such as charger port, LED port, etc.
It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

Advisable: The earbuds may start at a 100% volume and it may need to be reduced when they are switched on at first. This can be done by using volume control on media device,