KINO FLO DIV-LX20U Diva-Lite LED DMX Fixture Installation Guide
- June 3, 2024
- KINO FLO
Table of Contents
KINO FLO DIV-LX20U Diva-Lite LED DMX Fixture
Diva-Lite LED DMX Fixture
Included w/ Diva-Lite LED Models
Diva-Lite 20 LED DMX Kits
Diva-Lite 30 LED DMX Kits
Power
AC Input
The Diva-Lite LED includes a built-in power supply with universal input from
100-240VAC. It also includes a 12ft power cord with a locking IEC connector.
Ambient Operating Temperature
The Diva-Lite LED is designed to operate at temperatures from 14°F to 104°F
(-10°C to 40°C).
DC Input
The Diva-Lite LED can also be operated on 24VDC (input range 18-36VDC) through
a 3-Pin XLR.
The pin polarity is:
Pin # 1 – Ground
Pin # 2 + 18-36VDC
Pin # 3 not used
Note: A low voltage warning will display if input DC voltage is under 18VDC. Photo example: LOW VDC: 17
CONTROL PANEL MODELS
Control Panel – White Mode
A) On /Off: On = Green light displayed. Off = Red light displayed. The
display and all menu settings can be operated while the power button is in the
Off position, as long as power is applied to the controller. The On /Off
button only controls the light source.
B) Menu: Provides access to menu options such as General settings, Reset,
DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control
screen, press and hold for 3 seconds to switch through menus (White, Gels &
Hue, RGB, CIE xy and FX).
C) Preset Buttons: Factory defaults left to right are: 2700K, 3200K,
5000K and 6500K. G/M default value is 000. User can also use these preset
buttons to store custom Kelvin and G/M settings.
D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel. Factory
reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
E) Lock: Press the Lock button to disable all buttons and Control knob.
Press for 3 seconds to restore displayed presets to default factory settings.
F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in
sub-menus, pressing Mode always returns you to main display. When DMX is
applied, use Mode to access DMX channel on main display. Shortcut: Long press
will bring you back one step.
G) Data Port: Mini B USB for firmware updates.
H) Control Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX
address. Press the Control knob to toggle between Fine and Coarse increments
or when selecting options within menus.
DMX Note: Each LED Fixture has an “AUTO TERMINATE” feature. The last
fixture that does not have an XLR cable attached to the DMX “Out” port will
automatically terminate.
Control Panel – Gels/Hue Mode
A) Menu:
Provides access to menu options such as General settings (Gels/Hue Mode),
Reset, DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on
control screen, press and hold for 3 seconds to switch through menus (White,
Gels & Hue, RGB, CIE xy and FX).
B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default
value is 000. User can also use these preset buttons to store custom Kelvin
between 2500K and 9900K and custom G/M, Gel, Hue and Saturation settings.
C) Display:
Provides access to Dim, Kelvin, G/M, Gel, Hue/Saturation and DMX channel.
Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
D) Mode:
Press to navigate from Dim to Kelvin, G/M, Gel, Hue and Saturation settings.
When on the Gel function, pushing the Control knob in/out will apply the gel
or remove the gel. When in sub-menus, pressing Mode always returns you to main
display. When DMX is applied, use Mode to access DMX channel on main display.
Shortcut Tip: Long press will bring you back one step.
Control Panel – RGB Mode
A) Menu:
Provides access to menu options such as General settings (RGB Mode), Reset,
DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control
screen, press and hold for 3 seconds to switch through menus (White, Gels &
Hue, RGB, CIE xy and FX).
B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default
value is 000. User can also use these preset buttons to store custom Kelvin
between 2500K and 9900K and custom G/M, and RGB settings.
C) Display:
Provides access to Dim, Kelvin, G/M, RGB and DMX channel. Factory reset will
show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.
D) Mode:
Press to navigate from Dim to Kelvin, G/M, RGB settings. When in sub-menus,
pressing Mode always returns you to main display. When DMX is applied, use
Mode to access DMX channel on main display. Shortcut: Long press will bring
you back one step.
Control Panel – CIE xy
A) Menu:
Provides access to menu options such as General settings (CIE xy mode), Reset,
DMX, DMX Wireless, Camera LUT and Color Space. Shortcut: While on control
screen, press and hold or 3 seconds to switch through menus (White, Gels &
Hue, RGB, CIE xy and FX).
B) Preset Buttons:
Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. User can
also use these preset buttons to store custom xy settings.
C) Display:
Provides access to Dim, CIE xy coordinates and DMX Channel. Factory reset will
show: Dim = 10%, x = 0.460 , y = 0.411, G/M = 000, DMX = 001.
D) Mode:
Press to navigate from Dim to xy settings. When in sub-menus, pressing Mode
always returns you to main display. When DMX is applied, use Mode to access
DMX channel on main display. Shortcut: Long press will bring you back one
step.
Control Panel – FX (Effects)
FX mode provides access to effects including Candle, Fire, TV, Police,
Lightning, Paparazzi, Pulse and Scroll. Candle mode used as an example:
A) FX Option:
Choose the desired FX Mode by rotating the control knob. When on the desired
effect, there will be several pre-programed effects as well as control
parameters that can be altered.
B) Preset Buttons:
In FX Mode, Kelvin custom settings and any control functions displayed such as
Rate and Amplitude (Ampl) can be saved as a preset. Chosen values can be
assigned to any preset button by holding down the desired button for 3
seconds. The Kelvin display will flash once the setting is registered. To
restore presets to default factory settings, choose Reset under General
settings and Clear Presets. This method will reset all buttons in all Modes.
Shortcut: If only want to clear presets for Candle Mode, hold Lock button for
3 seconds while Candle mode is displayed.
C) Mode:
Press to navigate from Dim to Kelvin and FX settings. Shortcut: Long press
will bring you back one step.
Camera LUT
The Camera LUT (Look-up Tables) feature harmonizes the Kino Flo light sources to the camera. Depending on the camera and the Kelvin setting, some differences are very subtle, while others can be more dramatic. The corrections are applied as a CIE xy correction at each CCT (Kelvin) setting. The default setting is targeting the CIE xyz response (human eye). Press the green menu button to the left of the display screen and scroll down to Camera LUT, then press the control knob. Menu with camera selection will be displayed. Turn the control knob and press to select camera setting:
- C1 Arri Alexa
- C2 Sony Venice
- C3 Panavision DXL
- C4 Panasonic Varicam
The camera code (C1 for Arri Alexa), for example, will appear on the main menu
between DIM and CCT to designate that a camera setting is active.
Note : When the controller is reset, the camera settings will go to Kino
Flo Default mode.
Color Space
Color Space defines the RGB color space used and only affects color – not
Kelvin. It is used in RGB mode and Hue Angle and Saturation. There are a few
instances in the FX (Effects) mode that are also affected when color is used.
The RGB color space defines the value of Red, Green, and Blue primaries (in
CIE xy) and the white point is fixed at 6500 Kelvin. Press the green menu
button to the left of the display screen and scroll down to Color Space, then
press the control knob. Menu withcolor selection will be displayed. Turn the
control knob and press to select Color Space options:
rec 709 / sRGB
P3 D65
rec 2020
- The color space rec 709 / sRGB is commonly used on computer monitors, SDTV and HDTV television. There are slight gamma variations between rec 709 / sRGB, but not enough to separate into 2 color spaces.
- The color space P3 D65 is a common color space for digital movie projection.
- The color space rec 2020 is used in ultra high definition television (UHDTV).
- The color space is used when the controller is set to the RGB mode and when set to the Hue Angle/ Saturation mode.
- In RGB mode – the color space designation will be displayed at the top of the menu. When changing the Red, Blue or Green values, the Kelvin will be locked in at 6500 for all color spaces. When the Kelvin is locked in, CCT will be displayed as CCT*. When using Green/Magenta the CCT value is unlocked and color space selection has no impact.
- In Hue Angle/Saturation mode – the color space designation will be displayed on the Gel line and GEL will be displayed as GEL and CCT will be displayed as CCT. The Color space will be displayed only when Hue Angle and Saturation are being used. When using Green/Magenta or Gel, the CCT will be unlocked and color space selection has no impact.
Mounting Procedures
Baby Offset Arm
The Baby Offset Arm (MTP-B41F) allows fixtures to mount on the center of a stand or it can also be under slung from a baby stand to use as an up light.
Applying Louver
The Louver is fastened to the fixture with 4 Velcro straps.
Mounting Flozier
To mount Flozier accessory, remove Louver.
- Stretch two elastic cords around fixture.
- Take up slack on both elastic cords.
- Expand the Barndoors to smooth out the face of the Flozier and eliminate wrinkles
SnapBag & SnapGrid
The SnapBag accessory (DFS-FS31-S & DFS-FS21-S) is a lightweight fabric
tailor-made for the Diva-Lite LED. It slips over the fixture and is attached
with straps. The reflective material intensifies the soft light. The removable
Magic cloth or Grid cloth attaches to the inside with Velcro.
The SnapGrid accessory (LVR-FS340-S & LVR-FS240-S) is constructed of pre- stretched fireproof fabric with a built-in stainless steel frame. It unfolds and snaps into place. This model requires the use with the corresponding SnapBag; it is not designed to be used by itself.
Accessories
Cases
Diva-Lite LED Fixture Specifications
DIV-L20XU Diva-Lite 20 LED DMX, Univ
- C Input Voltage: 100~240VAC 50/60Hz, 150W
- Amperage VAC: 1.25A at 120VAC, 0.65A at 230VAC
- DC Input Voltage: 18~36VDC, 150W
- Amperage VDC: 6.25A at 24VDC
- Kelvin Range: 2500K~9900K
- Dimming Range: 100%~1%
- Weight: 14.5 lb (6.5kg)
- Dimensions: 25 x 13 x 6” (63.5 x 33 x 15cm)
DIV-L30XU Diva-Lite 30 LED DMX, Univ
- AC Input Voltage: 100~240VAC 50/60Hz, 150W
- Amperage VAC: 1.25A at 120VAC, 0.65A at 230VAC
- DC Input Voltage: 18~36VDC, 150W
- Amperage VDC: 6.25A at 24VDC
- Kelvin Range: 2500K~9900K
- Dimming Range: 100%~1%
- Weight: 17 lb (8kg)
- Dimensions: 39 x 10.5 x 6” (99 x 27 x 15cm)
FCC Part 15 Verification:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference.
FCC Part 15 Declaration of Conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
KINO FLO, INC
Diva-Lite 20 LED, Diva-Lite 30 LED
ID: XRSCRMXTIMO101
IC: 8879A-CRMXT101
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. The luminaire is intended for professional use only.
Environmental: Disposal of Old Electrical & Electronic Equipment.
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. This product is made of recyclable
materials and should be disposed of in accordance with governmental
regulations.
Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA
Tel: 818 767-6528
website: www.kinoflo.com