nave 3158199 Max Poland Table Lamp Instruction Manual
- June 3, 2024
- nave
Table of Contents
nave 3158199 Max Poland Table Lamp Instruction Manual
Safety instructions
Electrical connections may only be carried out by expert staff. The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using. The given mains voltage may not be exceeded.
Attention!
Before beginning any work on the lamp, disconnect it from the mains power line
by removing the fuse or unplugging the power plug. This also applies to
cleaning, maintenance and replacing bulbs. Prior to starting installation
work, de-energise the power line – remove the fuse and/or set the switch to
“OFF. Lamps with transformers may be operated only with the original
transformer. Lamps become very hot in the area of the lighting point.
Therefore, never touch the lamp when it is switched on or still hot. RISK OF
INJURY FROM BURNS!
The bulb may be replaced only by competent personnel. Use only bulbs of the
same type and voltage rating.
Lamps are not toys.
Children frequently do not recognize the dangers associated with electric
appliances or their packaging. Therefore, you should keep them away from
children. If you give this lamp to someone else, always include these
instructions. If the lamp is damaged, in particular the cord or lamp socket,
discontinue use of the lamp immediately. In the event of a malfunction, always
have the lamp repaired by a qualified electrician. Never attempt to repair the
lamp yourself. Improper repairs can endanger the safety of the user.
Protection class II . This luminaire is particularly insulated and must not be
connected to a protective earth-terminal.
Pay attention to the fact that electric lines are not damaged during
installation.
Only replace defective lamps by lamps of the same design, wattage and voltage.
The care of luminaries is restricted to their surfaces. Use only a dry cloth.
Wetness must not get into wiring spaces or to current-carrying parts.
Plug and connection elements must be free of train and trick strengths.
Environmental protection
Dispose of the lamp at the collection points designated for electronic waste.