PHILIPS BVP080 SmartBright Solar Flood Light User Manual

PHILIPS BVP080 Smart Bright Solar Flood Light

Symbols

Ty pe Number| Flux(lm)| Battery type| Battery parameter| PV parameter| Remote type| Remote distance| CCT| Ta| Weight| luminous area
---|---|---|---|---|---|---|---|---|---|---
BVP080 LED10/757 060 G2| 1000lm| Lithium iron phosphate| 3.2V/6AH| 8W/5V| infrared| ≤ 8m| 5700K| 0-50℃| 2.37Kg| 0.029m²
BVP080 LED20/757 100 G2| 2000lm| Lithium iron phosphate| 3.2V/12AH| 15W/5V| infrared| ≤ 8m| 5700K| 0-50℃| 2.83Kg| 0.029m²
BVP080 LED30/757 150 G2| 3000lm| Lithium iron phosphate| 9.6V/6AH| 20W/15V| infrared| ≤ 8m| 5700K| 0-50℃| 4.46Kg| 0.073m²
BVP080 LED48/757 200 G2| 4800lm| Lithium iron phosphate| 9.6V/9.9AH| 35W/15V| infrared| ≤ 8m| 5700K| 0-50℃| 6.20Kg| 0.073m²

Dimensions

Product Overview

Luminaire Light

Auto (Wake up): Luminaire will light on dusk to dawn(max 12Hours) per default lighting profile
3H: Luminaire will light on 3 hours per default lighting profile and then turn off
5H: Luminaire will light on 5 hours per default lighting profile and then turn off
8H: Luminaire will light on 8 hours per default lighting profile and then turn off
Dim Down: Light output from 100% to 10%, every step 10%
(Note: It will exit dim mode after 2Hours for previous Auto mode)
Dim Up: Light output from 10% to 100%, every step 10%
On/OFF(For Indoor Use Purpose): Luminaire Light On/OFF per remote controller,
light on with 100% light output

Notes:

• Before using the product connect solar panel cable to luminaire to active luminaire with factory default working mode Auto, and then use the functions of the remote control.
• To go into Sleep mode (Stay for storage purpose), press OFF key, wake up by press Auto or ON key.
• LED indication on luminaire: Green on (Charging), Green Flash(Battery Low Capacity,<30%).

Application NOTES:

• Install the solar panel on open roof or wall facing towards Sun. The tilt angle can be adjusted.
• There shall not be any light source over the solar panel at night, as it may interfere with the operations of solar flood light.
• Charge the product under Sunlight for 8 hours before first use.
• After installation, the working modes can be set from infrared remote controller.
• This product does not need any external electrical connection. It works 100% on solar energy.
• Detection of duck/dawn is based on light intensity falling on solar panel.
• The battery backup will reduce if the ambient temperature is < 0 degree Celsius.
• When battery low capacity (<30%), light output will dim down to 15% to extend running time.
• The products can be stored up to 6 months. In case it is required to store more than 6 months, it is must to re-charge the product in bright daylight. Otherwise, it may affect the battery lifetime performance.
• Lighting profile from dusk to dawn(Max 12Hours)，applicable for 3H/5H/8H working mode.
• The operating position is universal.
• Suitable for outdoor use.
• The light source and/or control gear and/or external flexible cable contained in this luminaire are not replaceable, in case of damage replace the luminaire.
• Please inform yourself about the local waste disposal, separation and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose your old product and packaging with your normal household waste. The correct disposal of the packaging, your product and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed separately from the municipal waste stream via designated collection facilities. When disposing a product that contains non-user replaceable batteries, the non-user replaceable batteries shall be removed by a professional.

SIGNIFY LUMINAIRES (SHANGHAI) CO.,LTD
Address: 2F, Building 1, No. 2555 Hechuan Road, Minhang District, Shanghai, P.R. China
Postal code: 200233

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>