ORACLE LIGHTING Jeep Comanche MJ LED Tail Lights Installation Guide

ORACLE LIGHTING Jeep Comanche MJ LED Tail Lights

ORACLE LIGHTING
COMANCHE MJ TAIL LIGHTS ORACLE PART #5909

INSTALLATION GUIDE

TOOLS NEEDED

• PHILLIPS HEAD SCREWDRIVER
• FLAT HEAD SCREWDRIVER WIRE CRIMPS
• STRIPPERS
• HEAT SOURCE

1. STEP: 1
   WATCH THE VIDEO SCAN QR OR VISIT: WWW.YOUTUBE.COM/WATCH?V=F5GKZSYK2Z0
   

2. REMOVE THE (2) PHILLIPS SCREWS ON THE OUTSIDE OF THE LENS.

3. NEXT, REMOVE THE (2) PHILLIPS SCREWS ON THE INSIDE OF THE TRUCK BED SIDE.

4. NOW TAIL LIGHT CAN BE REMOVED. UNPLUG THE

5. START ON THE BOTTOM SOCKET WITH (3) WIRES ONLY. CLIP WIRES FROM SOCKET.

6. CONNECT THE BLACK WIRE TO THE BLACK WIRE ON THE QUICK DISCONNECT.

7. CONNECT THE BLUE WIRE TO THE WHITE WIRE ON THE QUICK DISCONNECT.

8. CONNECT THE BROWN WIRE TO THE YELLOW WIRE ON THE QUICK DISCONNECT.

9. SECOND SOCKET, CLIP THE WIRES. TWIST BOTH BROWN WIRES TOGETHER.

10. THEN TWIST BOTH BLUE WIRES TOGETHER CONNECT THE BLACK WIRE TO THE BLACK WIRE ON THE QUICK DISCONNECT.

11. CONNECT THE TWISTED BLUE WIRES TO THE WHIte WIrE ON THE DISCONNECT

12. CONNECT THE TWISTED BROWN WIRES TO THE VEIl OW WIRE ON THE QuICK DISCONNECT

13. WIRING FOR REVERSE LIGHT PLUG, BLACK WIRE TO BLACK WIRE, WHITE WIRE TO BROWN WIRE W/WHITE STRIPE.

14. HEAT UP THE HEAT SHRINK ON THE END OF THE CONNECTORS. USE A HEAT GUN OR OTHER HEAT SOURCE.

15. 16. REMOVE ORIGINAL SPEED CLIPS. REPLACE WITH NEW SPEED CLIPS. NOW YOU CAN INSTALL YOUR NEW TAIL LIGHTS.

www.oraclelights.com © 2023 ORACLE LIGHTING 4401 Division ST. Metairie, LA 70002 FOR ADDITIONAL TECHNICAL SUPPORT PLEASE CALL US 1(800)407-5776

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>