aiwa RS-X SO Diviner User Manual
- June 4, 2024
- Aiwa
Table of Contents
aiwa RS-X SO Diviner
Important Safety Instructions
- Please do not place the device near any form of heat sources
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to qualified personnel should there by any form of damage to the device.
- Keep this user manual for future reference/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose device to excessive neat (Direct sunlight etc)
- Do NOT immerse device into any form of liquids.
Unboxing
- RS-XSO Diviner Speaker
- Charging Adapter
- Remote Control
Product Specifications
- Model Number: RS-X50 Diviner
- BTVersion: VS.0
- Power Output: 50W
- Impedance: 40
- Frequency Response: 60Hz -23KHz
- S/N Ratio: 2 80dB
- Sensitivity: 400MV
- Supports: BT, AUX, TF Card, USB, TWs
- Supported Profiles: MP3, WMA, WAV, FIAC
- Transmission Distance (Estimated): 10 Meters (No Obstacles)
- DC Input Voltage/Current: 9V DC, IA/2A
- Battery: 7.4V/ 6000mAH
- Playback Time: 4-5 Hours
- Charging Time: 4-5 Hours
- Dimensions: 260 150160mm
- weight: 3.1Kg
The above playback& charging times are estimated values tested in a practical environment and may vary upon individual usage habits
Product Overview
-
USB Port
-
Master Volume Knob
-
Bass Adjustment Knob
-
Treble Adjustment Knob
-
Charging Indicator Light (Red while Charging, Green when Full Battery
-
Power ON/OFF
-
AUX In
-
BTIAUX Indicator Light
-
Source Button
-
Play/Pause Button
-
Charging Port 9V
-
Mute
-
StandyBy Mode
-
0-9 Number Keys
-
EQCycle between Sound Profiles: Classic/ Rock& RollV Jazz.
-
Mode: Cycle between Audio Modes: BT/USB/AUX.
-
Volume
-
Previous Track
-
Play/ause
-
Next Track
-
Volume
-
BT Mode
-
USB Mode
-
AUX Mode
-
TWS Connection Button
Playback Sources
- USB Playback: Insert USB into the designated port. playback will commence upon pressing play/pause button
- AUX Playback: Disconnect all BT devices before inserting AUX cable and connect it to audio source to s.art.
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on the speaker.
- Search and connect to “RS-XSo Diviner” from your mobile device.
- Press and hold Play/Pause button for 3-4 seconds to disconnect
TWS Function
- Turn on both speakers (Only compatible with the same mode)
- Press TWS Button, and both unites will pair to each other automatically within Thirty (30) Seconds
- Be sure to pair speakers to mobile device via BT to commence playback. TWS also works via AUX and USB mode.
Battery & Charging
Charging the speaker
- Connect charging ada ptor to the speaker and a suitable powers source
- Approximate charging time 4-5Hours
- Please fully charge up the speaker prior to first time usage.
Troubleshooting
Unable to connect to device:
- Please ensure the speaker is not connected to other devices
- Please ensure the speaker is within 10m from the device
No sound is coming out of the speaker:
- Please ensure your device is connected to the speaker
- Please ensure the music volume is at an audible level on both your mobile device and speaker.
Aiwa Electronics Intl Co, Ltd.
Explore more at www.int-aiwa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>