ADJ PC-100A AC Power Center User Guide
- June 6, 2024
- ADJ
Table of Contents
PC-100A Use Guide
©2018 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product names are trademarks or registered trademarks of their respective companies . ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.
ADJ PRODUCTS LLC World Headquarters | 6122 S. Eastern Ave. | Los Angeles,
CA. 90040 323-582-2650 |
323-582-2941 fax |
www.adj.com | support@adj.com
ADJ Products Group Mexico | AV Santa Ana 30 | Parque Industrial Lerma,
Lerma, Mexico 52000 +52 728-282-7070
UNPACKING This product has been thoroughly tested and has been shipped in
perfect condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect your product for damage and be sure all accessories necessary to
assemble the product have arrived intact. In the event, the damage has been
found or parts are missing, please contact our customer support team for
further instructions. Please do not return this product to your dealer without
first contacting customer support at the number listed below. Please do not
discard the shipping carton in the trash. Please recycle whenever possible.
CUSTOMER SUPPORT ADJ provides a customer support line, to provide setup help and to answer any question should you encounter problems during your setup or initial operation. Visit us on the web at www.adj.com for any comments or suggestions. For service-related issues please contact ADJ. ADJ SERVICE USA – Monday – Friday 8:00am to 4:30pm PST | Voice: 800-322-6337 | Fax: 323-582-2941 | support@adj.com
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products,
LLC products to be free of manufacturing defects in material and workmanship
for a prescribed period from the date of purchase (see specific warranty
periods below). This warranty shall be valid only if the product is purchased
within the United States of America, including possessions and territories. It
is the owner’s responsibility to establish the date and place of purchase by
acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#)
before sending back the product–please contact ADJ Products, LLC Service
Department at 800-322-6337. Send the
product only to the ADJ Products, LLC factory. All shipping charges must be
pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, ADJ Products, LLC will pay return
shipping charges only to a designated point within the United States. If the
entire instrument is sent, it must be shipped in its original package. No
accessories should be shipped with the product. If any accessories are shipped
with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, or for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if
the product is modified in any manner which ADJ Products, LLC concludes, after
inspection, affects the reliability of the product; if the product has been
repaired or serviced by anyone other than the ADJ Products, LLC factory unless
prior written authorization was issued to purchaser by ADJ Products, LLC; if
the product is damaged because not properly maintained as set forth in the
instruction manual.
D. This is not a service contract, and this warranty does not include
maintenance, cleaning, or periodic checkup. During the period specified above,
ADJ Products, LLC will replace defective parts at its expense with new or
refurbished parts and will absorb all expenses for warranty service and repair
labor by reason of defects in material or workmanship. The sole responsibility
of ADJ Products, LLC under this warranty shall be limited to the repair of the
product, or replacement thereof, including parts, at the sole discretion of
ADJ Products, LLC. All products covered by this warranty were manufactured
after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or
improvements upon its products without any obligation to include these changes
in any products theretofore manufactured. No warranty, whether expressed or
implied, is given or made with respect to any accessory supplied with products
described above. Except to the extent prohibited by applicable law, all
implied warranties made by ADJ Products, LLC in connection with this product,
including warranties of merchantability or fitness, are limited in duration to
the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to
this product after said period has expired. The consumer’s and/or Dealer’s
sole remedy shall be such repair or replacement as is expressly provided
above; and under no circumstances shall ADJ Products, LLC be liable for any
loss or damage, direct or consequential, arising out of the use of, or
inability to use, this product. This warranty is the only written warranty
applicable to ADJ Products, LLC Products and supersedes all prior warranties
and written descriptions of warranty terms and conditions heretofore
published.
LIMITED WARRANTY PERIODS
Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect
Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble
Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data
Distribution, etc. excluding LED and lamps)
Laser Products = 1-Year (365 Days) (excluding laser diodes which have a
6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180
Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to products purchased
within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180
Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem, as well as the R.A. number, must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without an R.A. number clearly marked on the outside of the package will be refused and returned at the customer’s expense. You may obtain an R.A. number by contacting customer support.
FEATURES
8 Channel 120V 3-Prong Sockets (rear panel)
8 Lighted Channel On/Off Rocker Switches (front panel) Resettable 15A NFB (No-
Fault Breaker)
4.9 ft (1.5m) Attached Main 3-Prong Power Cord
19-inch 1-Space Rack Mountable (rack screws not included)
SPECIFICATIONS
120V 60Hz Operation ONLY
Maximum Load Per Channel 10A
Maximum Total Load 15A or 1800W
Dimensions: L 19.0” (483mm) x W 5.0” (127mm) x H 1.7” (44m)
Weight: 4 lbs. (1.8kg)
SAFETY GUIDELINES
PROTECTION CLASS 1 – FIXTURE MUST BE PROPERLY GROUNDED!
DO NOT EXCEED 10A PER CHANNEL OR DO NOT EXCEED 15A TOTAL AMPS!
THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS DEVICE!
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURES
WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE
DISREGARD OF THESE SAFETY GUIDELINES VOID THE MANUFACTURES WARRANTY AND ARE
NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS. ONLY USE ORIGINAL PACKAGING
AND MATERIALS TO TRANSPORT THE DEVICE IN FOR SERVICE.
DO NOT OPERATE THE DEVICE IF THE POWER CORD IS FRAYED, CRIMPED, DAMAGED, AND/OR IF ANY OF THE POWER SOCKETS ARE DAMAGED AND/OR POWER CORDS OF DEVICES DO NOT INSERT INTO THE REAR SOCKETS SECURELY WITH EASE. DO NOT PLUG THE DEVICE INTO A DIMMER PACK! NEVER OPEN THIS DEVICE WHILE IN USE! KEEP FLAMMABLE MATERIALS AWAY FROM THE DEVICE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE THE DEVICE TO RAIN AND/OR MOISTURE!
FOLLOW THE STEPS BELOW TO INSTALL PC-100A IN A 19-INCH RACK
- Connect up to 8 device power cords to the 8 Channel power sockets on the rear panel.
- Connect the attached main power cord from the PC-100A to a suitable power source.
- Install and secure PC-100A with rack screws. (rack screws not included – see image below)
DIMENSIONAL DRAWINGS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>