FLYNOVA 4WD RC Car Toys for Boy Instruction Manual

FLYNOVA 4WD RC Car Toys for Boy

Operation instruction

Thank you for choosing our toy. To ensure correct and pleasing operations, please read through the following instruction and have enough understanding of the product before use.

Maintain:
This product contains electronic components, should not be used in water or damp environment, wipe the surface stains with a clean soft dry cloth.

How to assemble the battery

1. Turn the switch to the “OFF” position.
2. Use the screwdriver to open the battery compartment cover.
3. Load the battery correctly according to the polarity label in the battery compartment . If it is a battery pack , ensure it is correctly connected before inserting into the compartment.Close the cover and fix with screws afterwards.
4. Please assemble the battery under the instruction of the guardian

How to play

1. Put batteries on the car and remote control as shown in the picture, and turn on the power switch of the car and remote control.
2. Adjust the trimmer lever under the car so that the remote control car can drive in a straight line.
3. When the car battery is low, the speed will slow down, need to replace the battery or charge the battery.

Battery safety information

1. Do not dispose the battery in fire otherwise it might cause explosion or leakage.
2. Do not mix new and old batteries.
3. Do not mix different types of batteries. such as carbon zinc battery, alkaline battery or rechargeable battery.
4. It is recommended to use only batteries of the same brand or type.
5. Please be aware that the containing tiny components might cause suffocation, so battery replacement should be done by an adult.
6. Please correctly align the positive and negative poles of the battery in case of short circuit.
7. Please remove the exhausted battery from the product and replace with new one if necessary.
8. Battery may only be charged by or under the supervision of an adult.
9. Please keep the package and instruction properly since it contains important information for further reference.

Tyre replacement
Remove the screw, replace the tyre, and fasten the screw again. (Note that the screws on the front and rear wheels are different. The front wheels use long screw and the rear wheels use the short one.

WARNING
Danger of suffocation: this product contains tiny components, Not suitable for children under 6 !
Please keep the package properly for further reference!

Battery usage

• The controller requires 2X1 .5V “AA” non-rechargeable battery.
• The remote control car requires 1 X3. 7V rechargeable battery pack.
• Open the battery compartment cover with the assistance of a tool and insert the battery with the positive and negative poles aligned correctly.
• Please do not charge non-rechargeable battery.
• Rechargeable battery can only be charged under adult supervision.
• Please remove battery from the product before charging it.
• Please use battery of same brand or type.
• Do not connect more power than recommended.
• Please do not use batteries of different types or mixing new and old one.
• Please correctly align the positive and negative poles.
• Please remove the exhausted battery from the product.
• Please ensure the terminal of the power supply is not short-circuited.
• The wires, plugs, housings and other components of the battery charger should be checked regularly. When damage is found, stop using it until it is repaired.

Charging suggestions for rechargeable batteries

1. It is recommended to use a suitable adapter for charging, instead of a fast charger.
2. Please use the correct adapter to charge: input: 100-240V~50/60Hz0.2A; Output: 5.0V 500mA 0.5-1.SA.
3. Charging instructions: The charging battery is connected to the intelligent USB charging cable, which can be connected with USB the power medium of the socket can charge the battery, such as desktop computer, notebook computer, mobile power supply USB power socket or connect to the power supply for charging through USB adapter plug.

Play with the remote controller

1. Forward
   Pull the trigger of the remote backward, the car goes forward.

2. Backward
   Push the trigger forward, the car goes backward.

3. Turn left
   Pull the trigger of the remote backward and turn the steering wheel to left, the car turns left.

4. Turn right
   Pull the trigger of the remote backward and turn the steering wheel to right, the car turns right.

DRIFTING TECHNIC

Practise relevant controls of drifting by drifting in a circle around a reference object, such as a traffic cone. Gradually expand the radius of the circle to increase the difficulty.
Perform two circular drift consecutively.

Date of Product on : June 1,2023 Batch number: 06012023 Model: 1253A Made in China
Manufacturer: Guangdong Creative Double Star Technology Co. Ltd
Address: DOUBLE STAR BUILDING, NORTH OF NANCHENG ROAD, LIANXIA, CHENGHAI, SHANTOU, GUANGDONG, CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>