Fitonus NX8 Smartwatch Donna Chiamate Bluetooth 5.2 HD Schermo Orologio Smartwatch User Guide

**Fitonus NX8 Smartwatch Donna Chiamate Bluetooth 5.2 HD Schermo Orologio Smartwatch User Guide

**

OPERATING The Fitonus

Instruction for Use

Warm Reminder:
This product needs to download the APP, connect to Bluetooth through the APP, and cannot connect to Bluetooth alone. Please notice.

1. Smart watches can measure heart rate and blood oxygen, but cannot be used for any medical functions;
2. Charging: Please charge your smartwatch before use and make sure it is fully charged. Please make sure that the eject pins of the 2 magnetic charging cables are aligned with the 2 charging contacts of the main unit, or plug the charging cables into the USB adapter (adapter 5V 1A). Make sure that the metal contacts are free of dust, oxidation, and impurities. While charging, a charging icon will appear on the smartwatch’s screen. If you don’t use your smartwatch for a long time, please charge it once a month.
3. Do not use a power adapter with an output current of more than 2A for charging, otherwise, the smartwatch will be damaged.
4. Do not shower with hot water or place the smartwatch under high temperature; otherwise, the water resistance of the smartwatch will be damaged.
5. Do not charge when wet or with water.

II. Appearance

Product instruction

Package List

A. Package Box1
B. Smart Watch1
C. User Manual1
D. Magnetic USB Charger Cable1

III. Application installation and Bluetooth connection

Please search “fitcloudpro” in My app and Google Play on Android devices or APP Store on iPhone; or scan the QR code below to download and install the application.

Note: Android supports 5.0 and above; IOS supports 10.0 and above; Bluetooth hardware 5.0 and above; Bind the smartwatch. Click on the selection of bind device and then find the device you want to connect to. If there are multiple devices in the vicinity, select the MAC address of the smartwatch you want to bind. If the smartwatch is successfully tied to the phone, the Bluetooth icon will display at the top of the smartwatch.

IV. Product Parameters

Main control chip: RTL8763 EWE
Bluetooth: BLE 5.2
Screen size: 1.3 inches, TFT Screen
Battery capacity : 200mAh
Battery type: Polymer battery
Use time : 5-7 days
Waterproof level: IP68 Charging method: magnetic USB cable
Operating temperature: 0-40 °C
Compatibility: IOS 10.0 or above; Android 5.0 or above; fit most mobile device on the market.

V. Instruction for Use

Press the side button or lft your hand to wake up the screen, and press and hold for 3 seconds to switch the. interface in the home page. Slide up to enter the information bar; slide down to enter the control center; slide left to enter the sports data; slide right to enter the function list.

VI. Function Description

1. Replace the Watch Dial
   Long press the main page for 3 seconds to enter the watch replacement page. Or download the replacement dial on the app.

2. Control Center
   Siide down to enter the control center. There are: Do not disturb mode; Brightness Adjustment; Settings ; Find my ‘phone; System; Shutdown and Setting.

3. Brightness Adjustment
   Siide down to the control center and click the brightness adjustment icon to adjust the brightness of your device.

4. D0 Not Disturb Mode
   Siide down to the control center and click the Do not disturb fcon to confirm that do not disturb mode Is on.

5. Find My Phone
   Slide down to the control center, click Find my Phone icon, and your phone will vibrate to alert you.

6. System
   Siide down to the control center, click system to view the. system version.

7. Settings Slide
   down o the control center and click the settings icon to enter the function setting.

8. Information
   Side up to the control center, click audio icon, open audio mode.

9. Sport Data
   Siide once to the left to the sports data page, view the ‘sports data, and record steps, calories, and kilometers separately.

10. Heart Rate
    Slide twice to the left to the heart rate page, start measure and show the data.

V. Instruction for Use

Press the side button or lft your hand to wake up the screen, and press and hold for 3 seconds to switch the. interface in the home page. Slide up to enter the information bar; slide down to enter the control center; slide left to enter the sports data; slide right to enter the function list.

VI. Function Description

1. Replace the Watch Dial
   Long press the main page for 3 seconds to enter the watch replacement page. Or download the replacement dial on the app.

2. Control Center
   Siide down to enter the control center. There are: Do not disturb mode; Brightness Adjustment; Settings ; Find my ‘phone; System; Shutdown and Setting.

3. Brightness Adjustment
   Siide down to the control center and click the brightness adjustment icon to adjust the brightness of your device.

4. D00 Not Disturb Mode
   Siide down to the control center and click the Do not disturb fcon to confirm that do not disturb mode Is on.

5. Find My Phone
   Slide down to the control center, click Find my Phone icon, and your phone will vibrate to alert you.

6. System
   Siide down to the control center, click system to view the. system version.

7. Settings
   Slide down o the control center and click the settings icon to enter the function setting.

8. lnformation
   Side up to the control center, click audio icon, open audio mode.

9. Sport Data
   Siide once to the left to the sports data page, view the ‘sports data, and record steps, calories, and kilometers separately.

10. Heart Rate
    Slide twice to the left to the heart rate page, start measure and show the data.

11. Call Function ‘This function needs to be connected to audio Bluetooth. When entering the dial, you can enter the phone number and call as needed; long press on the keyboard 7 and 9 to enter *and #

12. Sport Mode
    Siide right to enter the list function, click to enter the sports mode and select your preferred sports mode.

13. Weather
    Slide right to enter the list function, click the weather icon and view the weather.

14. Music Control
    Slide right to enter the list function, click to enter the music control to adjust the upper and lower song titles.

VII.Other Functions

Alarm clock Find the watch reminder Call reminder
Drink water reminder ~ Sedentary reminder
Low power reminder Remote camera(start from APP)
Find phone Timer

VII. Cautions

1. Why should | wear my smartwatch tightly when measuring my heart rate? Using the principle of light reflection, the smartwatch penetrates the skin with a light source and collects the signal reflected on the sensor to calculate the heart rate. If not worn tightly, ambient light will enter the sensor and affect the measurement accuracy.

2. Not recommended to wear in a hot bath: the first factor: a hot bath will produce steam due to the high temperature of the bath water, it is easy to produce a ot of steam. Steam is a gas with a small molecule radius, so it can easily penetrate the gap on the Intelligent smartwatch casing. When the temperature drops, the water will gradually condense into ‘water droplets, which will cause damage to the circuit board and further damage the smartwatch.

3. When connecting Blustooth. Make sure the Bluetooth of your phone and the smartwatch are turned on. When doing a Bluetooth search, please make sure the smartwatch is not connected to another account number; when doing a Bluetooth search, please keep the smartwatch and the phone. as close as possible.

4. If the user’s phone has Installed other software, such as
   Mobile Manager, in order to ensure the normal operation of the background APP, please turn on the phone’s message push and allow background operation, otherwise it can not push messages.

5. To ensure the accuracy of the test data, after entering the blood oxygen test mode, stay relaxed and still during the test and make sure the smartwatch and your heart are at the same height. Please do not talk during the test. (This function provides data reference for blood oxygen changes before and after human exercise and cannot be used for medical purposes).

Battery Information

Warning
“This product is not a medical device. This smartwatch and its applications are not available for diagnosis, treatment or preventive therapy of diseases. Consult a medical professional before changing your exercise habits and sieep habits to avoid serious injury. The manufacturer reserves the right to modify and improve the functional descriptions of the user guide, as well as to update the content on an ongoing basis without notice. This user guide is for reference only, for smartwatch sold here, please refer to the   final product.

For any further questions please do not hesitate to contact us via:
Method 1: Click your amazon order – contact seller –send message;
Method 2: Send email directly to superwatchfit@163.com
Method 3: Whatsapp number +86 132 7245 9148
Whatsapp QR Code:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>