Fitonus Women’s Smartwatch with Bluetooth Call User Guide

Fitonus Women’s Smartwatch with Bluetooth Call

Product Information

Specifications

• Display: AMOLED Always-On Display
• Product Type: Smart Watch
• Manufacturer: Fitonus

Product Usage Instructions

Unboxing and Turning On

1. Open the package and take out the Smart Watch.
2. Wear your smartwatch and press and hold the upper button to turn it on.

Download and Connect

• Open the device on FitCloudPro by scanning the QR code with your phone.
• Scan the QR code above to download the client.

Charge and Activate
The magnetic charger and the magnetic suction hole on the back of the watch aligned fit, until the watch screen appears charging prompt, when the watch prompts low power, please charge in time, a device is an all-in-one machine, the back shell and the battery can not be removed.

Watch Operation Instructions
Tap the application icon on the menu page to access the corresponding function, swipe right to return, and press the up button alone to return to the main dial page.

Buttons and Touch Controls

• Upper Button:

1. Press and hold the button for 5 seconds on the main dial screen to bring up the power off-screen.
2. Double-click the button in the menu screen to switch between different menu styles, and click the button to return to the main dial.

• Down Button:

1. Press the button to enter the sleep state.
2. Long press the button bracelet to enter the sports interface.

Watch Functions

• Alarm Clock: Set single or cycle alarm clocks in the APP (up to 5 alarm clocks).
• Stopwatch: Start, pause, and reset timing. A maximum of 10 records can be saved.
• Breath Training: Choose between 1 minute and 2 minutes for breathing exercises. Follow the on-screen instructions for inhaling and exhaling.
• Blood Pressure: Measure blood pressure using PPG technology. Vibration reminder when the measurement is completed.
• Female Menstrual: Enable women’s health alert on the APP to view women’s health information on the watch.
• Heart Rate: Measure heart rate using PPG technology. Vibration reminder when the measurement is completed.
• Blood Oxygen: Measure blood oxygen using PPG technology. Vibration reminder when the measurement is completed.
• Sports: Choose from various sports modes like hiking, running, cycling, etc. Click the icon to start sports.

FAQs

• Q: How can I contact support for further questions?
  A: You can contact support by either clicking on your Amazon order and contacting the seller through a message or by emailing directly to watchfitonus@163.com.

• Q: How many alarm clocks can I set?
  A: You can set up to 5 alarm clocks in the APP.

• Q: How many records can be saved in the stopwatch?
  A: A maximum of 10 records can be saved in the stopwatch.

• Q: How long does it take to measure blood pressure, heart rate, and blood oxygen levels?
  A: The measurement time varies, but there will be a vibration reminder when the measurement is completed.

Please read this manual before using this product.

OVERVIEW

1. Open the package and take out the Smart Watch.
2. Wear your smartwatch and press and hold the upper button to turn it on.

Download and Connect

Open the device on “FitCloudPro” by scanning the QR code with your phone.

Scan the QR code above to download the client

1. Download “FitCloudPro” APP
   It can be downloaded and installed on the mobile phone by scanning the QR code on the manual, scanning the built-in QR code of the watch, or directly searching “FitCloudPro” in the stores.

2. Watch Connected

3. Scan code connection: After Bluetooth is enabled on the mobile phone, enter the APP (Note: If the APP cannot be opened, please open the positioning and then open the APP) and click Device->Add Device->click Scan code binding (scan the QR code on the watch).

4. Manual connection: After Bluetooth is enabled on the mobile phone, enter the APP (Note: If the APP cannot be opened, Click Device->Add Device->Click Search Device (find the device with the corresponding Bluetooth name and MAC address in “Settings” -> “System” -> “System Information” in the sliding control center of the watch)->click Connect.

5. Connect Bluetooth for calls: When the watch is in the initial state, Bluetooth for calls is enabled by default.

6. Mobile Android system: After the watch is successfully connected to the APP, the mobile terminal will prompt the watch to request Bluetooth pairing- click pairing -Talk Bluetooth connection success, you can dial and talk after the connection is successful.

7. Mobile iOS system: After the watch is successfully connected to the APP, the Bluetooth will automatically connect to the mobile phone. After the connection is successful, you can dial and talk. (Note: In the initial state of the watch, the media audio is turned off by default. Media audio opening method: Slide down from the main interface of the watch face (Control Center) – Click the phone icon – there are two options (call audio/media audio) – click the media audio, and the watch can play mobile music after opening.

Charge and Activate

The magnetic charger and the magnetic suction hole on the back of the watch aligned fit, until the watch screen appears charging prompt, when the watch prompts low power, please charge in time, the device is an all-in-one machine, the back shell and battery can not be removed.

Watch operation instructions

1. Dial page
   Long press the screen to enter the dial selection page, left or right stroke can switch the dial, and confirm the dial after clicking. (Note: The system presets 4 dial pages, the last dial is “Custom”, this dial will change with the dial market of APP side and the download Settings of custom dial)

2. Menu page
   Swipe right on the dial page to enter the menu page, once on the menu page press the up button twice in succession to switch menu styles, and single press to return to the main dial page.

3. Function page
   Tap the application icon on the menu page to access the corresponding function, swipe right to return, and press the up button alone to return to the main dial page.

Buttons and touch controls

Upper Button

1. Press and hold the button for 5 seconds on the main dial screen to bring up the power off screen
2. Double click the button in the menu screen to switch between different menu styles, and click the button to return to the main dial.

Down button

1. Press the button to enter the sleep state.
2. Long press the button bracelet to enter the sports interface.

Watch Functions

• Alarm Clock
  After the watch is connected to the APP, you can set a single alarm clock, a cycle alarm clock, and up to 5 alarm clocks in the APP.

• Stopwatch
  Click the Start button to start the timing, click the pause button to stop the timing, click the reset button to return the timing to zero. A maximum of 10 records can be saved.

• Breath Training
  In breathing exercises, there is a choice between 1 minute and 2 minutes. The user taps the corresponding time for breathing training.After clicking Start, follow the icon in the breathing exercise to zoom in and inhale, zoom out and exhale.

• Blood Pressure
  When entering the blood pressure measurement interface, the green light at the bottom will start the test and there will be a vibration reminder when the measurement is completed within 30 to 60 seconds. The measurement is based on PPG technology.

• Female Menstrual
  After the watch is connected to the APP, women’s health alert can be enabled on the APP to view women’s health information on the watch.

• Heart Rate
  When you enter the heart rate measurement interface, the green light at the bottom will start to measure. When the measurement is completed in about 40 seconds, there will be a vibration reminder. If the message “Please wear the watch correctly” is displayed, you need to wear the watch again.

• Blood Oxygen
  When entering the interface of blood oxygen measurement, the red light at the bottom will start the test for 30~60 seconds and there will be a vibration reminder when the measurement is completed.The measurement is based on PPG technology.

• Sports
  Sports mode options: hiking, running, cycling, mountaineering, badminton, yoga, basketball, etc. Click the icon to start sports.Weather

• Weather Forecast
  When the watch is connected to the APP, the weather interface will display real-time weather temperature and weather type.

• Notifications
  After the watch is connected to the APP, open the push of relevant information in the APP terminal, and the watch terminal can receive the corresponding message push, and can save the latest 15 messages at most.

• Setting
  The settings function contains an under-screen display (switch dial, brightness duration, brightness adjustment, wrist flip brightness duration), language, sound & vibration, menu style, battery, down button setting, time setting, QR code, and system.

• Music
  When the watch is connected to the APP, you can control the pause and start of the mobile music player, adjust the volume, and switch songs.

• Timer
  In the timing function, the system presets the common timing duration. You can click the corresponding duration to time quickly or click the custom button to set the time. Click the Start button to start the timing, click the pause button to pause the timing, and click the reset button to reset the timing to zero.

• Sleep Monitoring
  The watch displays total sleep duration as well as light and deep sleep duration last night, and the sleep screen slides up to show sleep data generated in the last seven days.

• Time Setting
  You can also manually set the time and date of the watch by enabling or disabling the 24-hour system on the time setting screen.

• Bluetooth Call
  When the watch is connected to the Bluetooth of the mobile phone, it can synchronize with the watch after adding the common contacts in the APP. You can dial directly from the interface of the common contacts of the watch, or use the watch to dial and control the call of the mobile phone.

• Movement (Sport) Data
  Display the number of steps, distance, and calorie data recorded on that day. You can scroll up the data interface to view the number of steps in the recent seven days and set the target number of steps, distance, and calories in the APP.

• Find My Phone
  After the watch is connected to the APP, click to find the phone, the phone will ring and the watch will show that the search is successful. If the watch and the APP are not connected, the watch side will prompt to show Bluetooth disconnect.

• Control Center
  Features: screen brightness adjustment, do not disturb mode, language assistant, power saving mode, settings, system information, find phone, call Bluetooth switch.

Q&A

1. The watch cannot start Press the power button for more than 6 seconds. The battery may be low. Charge it in time.
2. Bluetooth is not connected or cannot be connected
3. Please try to restart the watch and re-link.
4. Please try to restart Bluetooth and connect again.
5. Don’t connect your phone to other Bluetooth devices at the same time.
6. Watch measures heart rate, blood pressure, and blood oxygen data abnormal reason
7. Generally for measurement, the watch sensor and the human body are caused by poor contact.
8. Please pay attention to full contact between the sensor and the wrist during measurement.
9. For people with darker skin color and hairy arms, please enable enhanced measurement in the App [Device > Enhanced measurement].
10. Abnormal sleep data reason
11. Sleep monitoring simulates people’s self-perceived state of falling asleep and waking up, which needs to be worn correctly.
12. If you wear it too late or when you fall asleep, errors may occur.
13. Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 PM to 12:00 noon the next day. For more frequently asked questions, please check the App [My >FAQ]

Bluetooth data transmission

When connected to a mobile phone, the watch synchronizes some data, including weather, notifications, sports, and health data, with the phone via Bluetooth. When the connection is disconnected or Bluetooth is turned off, the data will not be synchronized.

Note:

1. Do not charge in a humid environment with water
2. please regularly use a clean flannelette to clean the magnetic suction charging hole on the back of the watch, to ensure that the magnetic suction charging hole and magnetic charger fit, to ensure normal charging
3. This product is not equipped with a power adapter, in order to ensure the safety of family and property, when charging, you can use the computer USB interface or choose a power adapter whose output is not more than 5V 1A. Please buy the power adapter through the regular channel, and avoid using the bottom quality and fake power adapter to avoid bursting or fire. Matters needing attention
4. The measurement results of this product are only for industrial examination and are not used for any medical use or basis. Please follow the doctor’s guidance and do not use the measurement results for self-diagnosis and treatment.
5. This product’s waterproof grade is IP67, and can not be used for deep diving and a long time in the water. In addition, this product does not put hot water, because the steam will affect the watch.
6. The Company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version. This is normal.

For more help, you can contact our customer service support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>