Fitonus F19 Smart Watches for Women User Guide

: June 12, 2024
: Fitonus

Table of Contents

Appearance
Package List
Instruction for Use
Other Functions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fitonus F19 Smart Watches for Women User Guide

If you have any further questions, please contact: Method 1: click on your Amazon order; contact seller— send message;

Method 2:email directly to superwatchfit@163.com

I. Instruction for Use Warm Reminder: This product needs to download the APP, connect to Bluetooth through the APP, andcannot connect to Bluetooth alone. Please notice.

Smart watches can measure heart rate and blood oxygen, but cannot be used for any medical functions;
Charging: Please charge your smartwatch before use adman censure it is fully charged. Please make sure that the eject pins of the2magnetic charging cables are aligned with the 2 charging contacts of the main unit, or plug the charging cables into the USB adapter(adapter 5V 1A). Make sure that the metal contacts are free of dust, oxidation, and impurities. While charging, a charging icon will appear on the smartwatch’s screen. If you don’t use your smart watch for a long time, please charge it once a month.
Do not use a power adapter with an output current of morethan2A for charging, otherwise, the smartwatch will be damaged.
Do not shower with hot water or place the smart watching derigs temperature; otherwise, the water resistance of the smart watch will be damaged.
Do not charge when wet or with water

Appearance

Product instruction

Product instruction

Remove Strap and Charge Mode

Product instruction

Package List

A. Package Box1
B. Smart Watch1
C. User Manual1
D. Magnetic USB Charger Cable1

Application installation and Bluetooth connection

Please search “Fit cloud pro” in My app and Google Play on Android devices or APP Store on iPhone; or scan the QR code below to download and install the application. Note: Android supports5.0and above; IOS supports 10.0 and above; Bluetooth hardware5.0and above; Bind the smartwatch. Click on the selection of bind device and then find the device you want to connect to. If there are multiple devices in the vicinity, select the MAC address of the smart watch you want to bind. If the smart watch is successfully tied to the phone, the Bluetooth icon will display at treetop of the smartwatch.

Product Parameters

Main control chip: RTL8763 EWE
Bluetooth: BLE 5.2
Screen size: 1.3 inches, TFT Screen
Battery capacity: 200mAh
Battery type: Polymer battery
Battery Model: 502020
Battery Power Parameter: 0.74wh
Nominal Voltage: 3.7V
Use time: 5-7 days
Waterproof level: IP68
Charging method: magnetic USB cable
Operating temperature: 0-40 ℃
Compatibility: IOS 10.0 or above; Android 5.0 or above; fit most mobile device on the market

Instruction for Use

Press the side button or lift your hand to wake up the screen, address and hold for 3 seconds to switch the interface in the homepage. Slide up to enter the information bar; slide down to enter the control center; slide left to enter the sports data; slide right to enter the function list.

Function Description

Replace the Watch Dial
Long press the main page for 3 seconds to enter the watch dial replacement page. Or download there placement dial on the app
Control Center
Slide down to enter the control center. There are: Do not disturb mode; Brightness Adjustment; Settings; Find my phone; System; Shutdown and Setting.
Brightness Adjustment
Slide down to the control center and click the brightness adjustment icon to adjust the brightness of your device
Do Not Disturb Mode
Slide down to the control center and click the Do not disturb icon to confirm that do not disturb mode is on.
System
Slide down to the control center, click system to view the system version.
Settings
Slide down to the control center and click the settings icon to enter the function setting
Information
Slide up to the control center, click audio icon, open audio mode.
Sport Data
Slide once to the left to the sports datapage, view the sports data, and record steps, calories, and kilometers separately.
Heart Rate
Slide twice to the left to the heart rate page, start measure and show the data
Blood Oxygen
When entering the blood oxygen measurement, the red light at the bottom to start the measurement and a vibration reminder will bed is played when the measurement is measurement is completed in approximately 45 seconds.
Blood Pressure
When entering the blood pressure measurement, the lower green light will light up to start the measurement and a vibration will be displayed when the measurement is completed in about 45seconds.
Sleep Monitor
Displays the sleep monitoring status of the current day the last seven days, in which the data is updated every day and the data can be synchronously saved when the APP is connected and the device recalculates the data information of the new day Sleep monitoring time: 21: 30-12:00
Women’s Health
Keep the watch connected to the APP, youkan open the female health reminder in the app. You can view the female health reminders on the watch.
Call Function
This function needs to be connected to audio Bluetooth. When entering the dial, you cementer the phone number and call as needed; long press on the keyboard 7 and 9 to enter *and #
Sport Mode
Slide right to enter the list function, click to enter the sports mode and select your preferred sports mode.
Weather
Slide right to enter the list function, click the wear there icon
Music Control
Slide right to enter the list function, click to enter the music control to adjust the upper and lower song titles.

Other Functions

Alarm clock
Keep the clock connected to the APP. Toucanet a single alarm clock or a cyclic alarm clock.

Call reminder
This function needs to be connecter dtoaudio Bluetooth. When someone calls you, watch will vibrate to remind you.

Drink water reminder
You can open this function via Device with drink reminder in the app. After opening, you can set the start time. End time and reminder interval.

Sedentary reminder
You can open this function via Device with sitting reminder in the app. After opening, you can set the start time, end time and period for Do Not Disturb.

Low power reminder
You can save power on your watch by turning on Saving Mode in the watch’s battery.

Remote camera(start from APP)
This function needs to be connected to your mobile phone, in the “Fit cloud pro” app open “Shake to Take a Photo”.

Find phone
Keep the watch connected to the APP and click Find my phone. The bell will ring on your cell phone and the watch will indicate that you have successfully found your cell phone: If the watch is not connected to the APP, the watch will indicate that it is not connected.

Timer
As for the timer function, the user can start the quick time by the preset system time or click the custom button to set the time. Click the start button for the timing of the start. Click the Pause button to time the pause. Click the Reset to Zero button.
Find phone

Calculator
The numeric input is within the upper limit of 7 digits( input of negative numbers isn’t processed, and the result of the calculations within the upper limit of 8 digits. If the result exceeds the calculated value, it is displayed with that cannot be calculated displayed with “–” that cannot be calculated.
Calculator

Cautions

Why should I wear my smartwatch tightly when measuring heart rate?
Using the principle of light reflection, the smartwatch penetrates this in with a light source and collects the signal reflected on theses or to calculate the heart rate. If not worn tightly, ambient light
will enter the sensor and affect the measurement accuracy.
Not recommended to wear in a hot bath:
the first factor: a hot bath will produce steam due to the heighted prelature of the bath water, it is easy to produce a lot of steam. Steam is a gas with a small molecule radius, so it can easily penetrate the gap on the intelligent smartwatch casing. When the temperature drops, the water will gradually condense intonated or pelts, which will cause damage to the circuit board and fur there damage the smartwatch.
When connecting Bluetooth. Make sure the Bluetooth of your phone and the smartwatch Cha returned on. When doing a Bluetooth search, please make sure the smart watch is not connected to another account number; when doing a Bluetooth search, please keep the smart watch and the phone as close as possible
If he user’s phone has installed other software, such as Mobile Manager, in order to ensure the normal operation of the background APP, please turn on the phone’s message push and allow back ground operation, otherwise it can not push messages.
To ensure the accuracy of the test data, after entering the blood oxygen test mode, stay relaxed and still during the test adman censure the smartwatch and your heart are at the same height. Please do not talk during the test. (This function provides datary ferrous for blood oxygen changes before and after human exercise and cannot be used for medical purposes)