HOMSHADE HY21 10 Foot Patio Offset Umbrella User Manual
- May 15, 2024
- HOMSHADE
Table of Contents
USER MANUAL
10-Foot Patio Offset Umbrella
HY21 10 Foot Patio Offset Umbrella
HY21
Questions? Contact Our Professional Customer
Support at support@homshade.com.
-
THE DIAGRAM IS FOR REFERENCE ONLY
NOTICE!- For residential use only.
- Umbrella base weight is not included. Do not use this umbrella without weights.
- Always remove umbrella from its stand when not in use.
- Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and / or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
- The umbrella must be secured in place at the bottom using weights. Do not assemble the umbrella on sandy, muddy or loose soil.
- If the crank gets too hard to turn, check if the rope has come off the pulley. lf you continue to turn the crank, the rope or crank handle could break.
BEFORE FIRST USE
- Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully pull the ribs apart to free them.
- Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.
CLEANING AND STORAGE
- Wipe clean with mild detergent, warm water, and a soft cloth.
- Do not use abrasive materials or cleaners.
- Store in a dry area shielded from the weather.
- If necessary, cover with a furniture cover or tarp.
PARTS LIST
PRODUCT ASSEMBLY
- Insert the part B crossbar into the part A crossbar.
Attach the part C base to the crossbars with four part 1 screws and four part 2 washers.
- Firmly insert the conopy of the part D umbrella into the umbrella frame.
- Insert the umbrella into the part C base.
Tighten the knob to lock it in place.
Opening Canopy
- Flip the handle and move the arm up.
- Lock it in your desired position. Slide the sleeve down to secure the arm.
- Slowly turn the crank to open the canopy.
To tilt the umbrella
- Lift the sleeve, filp the handle, and move the arm up/down to adjust the tilt angle of the umbrella.
- Lock it in your desired position and replace the sleeve.
Caution: Avoid fully tilting in windy conditions.
To close the umbrella
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>