Vosuja YB-A5 LED Light Mirror Instruction Manual
- June 17, 2024
- Vosuja
Table of Contents
Vosuja YB-A5 LED Light Mirror
Product Specifications:
- Installation: Vertical or Horizontal
- Size: Customizable
- Material: Not specified
- Color: Not specified
Installation Method
- Decide whether you want to install the product vertically or horizontally based on your preference.
- Use the positioning ruler to confirm the locations for drilling holes on the wall and mark the spots with a marker.
Vertical Installation:
- Hang the mirror a few inches above the highest part of the faucet.
- Use the positioning ruler to align the desired location vertically against the wall using a level ruler.
- The lower line on the ruler indicates the product size. Locate the corresponding hole spots for drilling on the upper linebased on your product size.
- Mark spots #3 and #4 for vertical installation.
Horizontal Installation:
- Follow steps 1 and 2 from the vertical installation instructions.
- Mark spots #1 and #2 for horizontal installation.
FAQs
- Q: How do I use the positioning ruler for drilling holes?
A: The positioning ruler helps you align and mark the spots accurately for drilling holes based on your product size and installation preference. Follow the instructions provided in the manual for proper usage.
Installation Instruction
BEFORE YOU BEGIN
important Safety Instructions:
- Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.
- All information in these instructions is based upon the latest product information available at the time of publication.Reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
- These instructions contain important care, cleaning, and warranty information-please leave instructions for the consumer.
- Before installation carefully inspect the new fixture for any signs of damage.
- Assembly by two or more adults is highly recommended.
- To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
- Ensure that the fixing location is able to take the weight of the complete fitting.(solid stone/brick walls).
Pre-assembly
- After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
- Keep the voltages between 1 00V and 120V. If the voltage exceeds 120V, please use a transformer.
- You can connect the wires directly to your junction box or the plug.
WARNING: Risk of electrical shock.
A licensed electrician should make all electrical connections.
WARNING: Risk of electrical shock.
Connect only to a circuit protected by a typical two-pole circuit breaker.
WARNING: Risk of electrical shock.
Disconnect power before servicing.
-
Installation tools.
-
Accessories: 4pcs 304 stainless steel screws, 4pcs anchors, lpcs Positioning Ruler (lpcs screws & lpcs anchor are for backup).
-
Decide the installation method as per your reference. Confirm the locations for drilling holes with the positioning ruler, and use a marker to mark the spots on the wall.
Note: Please hang the mirror a few inches above the highest part of the faucet.
How to Use the Positioning Ruler
The positioning ruler makes it easier for you to drill perfect holes for hanging the mirror.
-
Confirm the location to hang the mirror first, and make sure the positioning ruler is placed against the wall horizontally by using a level ruler.
-
The lower line is product size. According to your product size, you can find the corresponding hole spots for drilling, which are indicated on the upper line.
-
Mark the spots accordingly, #1&2 for horizontal installation while # 3&4 for vertical installation.
Drill pilot holes on the marked spots -
Use an electric drill to punch two 1/4 (6mm) holes at the marked spots, and then apply wall anchors with hammer. (1/4 (6mm) drill bit, drilling depth in 1518 (40mm))
Note: Please wear goggles and pay attention to safety.
Insert the screw
-
Use the screwdriver to tighten the screw on the wall anchors, set aside 5/16 (7mm) distance to wall.
Mount the mirror on the wall and ensure it is sturdy
-
Hang the mirror on the wall (please confirm the hook is hanging on the screw safely when viewed from the side).
After installation, gently shake the lamp mirror without
PS: Shake the product, need to hold,in case the product is not installed in
place, loose and fall
Connect the power (Suitable for lamp mirrors)
There are three power wires behind the mirror, including the live wire (black), the neutral wire (white) and the ground wire (green). You can connect the wires to standard switched lighting circuit or plug.
If you want to connect power wires to plug, you can refer to the steps:
- Remove the plug cover.
- Unscrew the screws on each of the plug’s pins.
- Insert the tisted copper wires into the holes in the pins.
- Tighten the ittle screw on each of the plug’s pins.
- Make sure the wire is tightly clamped by the brake or clip.
- Replace the cover of the plug.
Other power connection methods are on the same principle.
Power checking mirror (Products without light are not applicable)
is the smart switch.
- Tricolor light: This switch can control the light brightness and color temperature switch. Keep holding it down and the brightness will change.
- You can adjust the color of the light to your liking: white light for the first touch, yellow for the second touch, and natural light for the third touch.
- Monochrome lamp: This switch can control the light brightness. Keep holding it down and the brightness will change.
is the anti-fog switch.
When you are not using it, remember to turn off the switch to prevent wasting
energy. Anti-fog film working principle: Anti-fog film can effectively convert
electric energy into heat, and transfer heat directly to the mirror, so that
the mirror temperature. Specific power to maintain a constant temperature,
effectively prevent water vapor condensation on the mirror, play the role of
anti-fog.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>