VirtuOx 920M Overnight Oximetry Test Instruction Manual
- June 1, 2024
- VIRTUOX
Table of Contents
VirtuOx 920M Overnight Oximetry Test
Product Information
Specifications
- Product Name: 920M Patient Self-Administered Overnight Oximetry
- Usage: Monitoring blood oxygen levels during sleep
- Manufacturer: VirtuOx
- Contact for Assistance: VirtuOx at 877-897-0066
Product Usage Instructions
Test Setup
- Follow the prescribed test conditions.
- Remove any fingernail polish and coverings from the finger you will be using.
- Attach the sensor to the device as shown in the instructions.
- Attach the sensor to your index finger and secure it with tape or a Band-Aid.
- Turn on the device and check the numbers displayed.
- Go to sleep and wear the device throughout the night.
- When you wake up in the morning, turn off the device and contact the DME courier for device pickup.
Additional Instructions
For any further assistance, please contact VirtuOx at 877-897-0066.
FAQ
Q: What should I do if I have trouble wearing the device throughout the night?
A: If you encounter difficulties wearing the device, contact VirtuOx for guidance and support.
Q: Can I reuse the sensor for multiple nights?
A: It is recommended to use a new sensor for each night to ensure accurate results.
Q: How do I know if the device is functioning correctly?
A: Ensure the numbers on the display are visible and consistent If you notice any irregularities, contact VirtuOx for assistance.
Information
- Patient Name _ ___
- Reading ID ___
- Your prescriber ordered this oximetry test to monitor your blood oxygen levels while you are asleep.
- It is vital you closely follow these instructions to get the best results.
- VirtuOx is the testing facility that will process the test results and send them to your prescriber.
- Per Medicare guidelines, the company that delivers the testing device to you cannot assist with the instruction or performance of the test.
- DME Courier: _____
- Phone __
- Please follow the conditions below as prescribed: __
- To create the best outcome we would also like to ask a few subjective questions about your sleep and cardiac issues you may have.
- Scan the below QR code with your smartphone. Enter your information into the webpage.
IMPORTANT
You must stay awake during the first 10 minutes of the test.
TEST SETUP
- Follow the test conditions above.
- Remove any fingernail polish and coverings from the finger you will be using.
- Attach the sensor to the device as shown below.
- Attach the sensor to the index finger and apply tape or Band-Aid to secure the sensor to your finger.
- Turn the device ON and see the numbers on the display.
- Go to sleep and wear the device throughout the night.
- When you wake up in the morning, turn the device OFF.
- Then call the DME at the phone number above to pick up the device.
ADDITIONAL INSTRUCTIONS
If the sensor falls off during the night:
- Replace the sensor on your finger.
- Check to see if the oximeter is ON and displays numbers.
- If the oximeter is OFF, press the power button to turn it ON.
If the indicator light blinks yellow or red for several minutes:
- Reposition the sensor on the finger.
- Continue the test.
If the number(s) flash(es) on the screen each second, then the batteries are low:
- Do not replace batteries.
- Continue the test.
- Advise DME when they pick up the equipment.
- FOR FURTHER ASSISTANCE, PLEASE CONTACT VIRTUOX AT877-897-0066.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>