VIRTUOX WristOx II Patient Self Administered Overnight User Manual

VIRTUOX WristOx II Patient Self-Administered Overnight

Specifications

• Product Name: WristOx II Patient Self-Administered Overnight Oximetry
• Manufacturer: VirtuOx
• Purpose: Monitor blood oxygen levels during sleep
• Testing Facility: VirtuOx
• Contact for Assistance: VirtuOx – 877-897-0066

Test Setup

1. Follow the prescribed test conditions provided by your healthcare provider.
2. Remove any fingernail polish and coverings from the finger you will be using for the test.
3. Attach the sensor to the device following the provided instructions.
4. Attach the sensor to your index finger and secure it with tape or a Band-Aid.
5. Put on the device. The numbers will automatically display.
6. Go to sleep wearing the device throughout the night.
7. Upon waking up in the morning, remove the device. It will power off automatically.
8. Contact the DME courier at the provided phone number to arrange device pickup.

Additional Instructions

If you receive a Low Battery Indicator, follow these steps:

1. DO NOT REPLACE BATTERIES.
2. Continue the test until completion.
3. Inform your local supplier when they come to pick up the equipment about the low battery.

Patient Name ____ Reading ID __
Your prescriber ordered this oximetry test to monitor your blood oxygen levels while you are asleep. It is vital you closely follow these instructions to get the best results. VirtuOx is the testing facility that will process the test results and send them to your prescriber.

Per Medicare guidelines, the company that delivers the testing device to you cannot assist with the instruction or performance of the test.

DME Courier: ____ Phone __
Please follow the conditions below as prescribed: To create the best outcome we would also like to ask a few subjective questions about your sleep and cardiac issues you may have. Scan the below QR code with your smartphone. Enter your information into a webpage.

IMPORTANT
You must stay awake during the first 10 minutes of the test.

TEST SETUP

1. Follow the test conditions above. Remove any fingernail polish and coverings from the finger you will be using.
2. Attach the sensor to the device as shown below.
3. Attach the sensor to your index finger and apply tape or Band-Aid to secure the sensor to your finger.
4. Put on the device. The numbers will automatically display.
5. Go to sleep. Wear the device all night.
6. When you wake up in the morning, take the device off. The unit will power OFF automatically. Then call the DME at the phone number above to pick up the device.

ADDITIONAL INSTRUCTIONS

If the sensor falls off during the night:

1. Replace the sensor on your finger.
2. Check to see if the oximeter is ON and displays numbers.
3. Sensor Icons

Reposition sensor notice
Low Battery Indicator

1. DO NOT REPLACE BATTERIES.
2. Continue the test.
3. Advise your local supplier when they pick up the equipment.

FOR FURTHER ASSISTANCE, PLEASE CONTACT VIRTUOX AT 877-897-0066.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>