VIRTUOX VPOD Handheld Pro Patient Self Administered Overnight Oximetry Instructions

VIRTUOX VPOD Handheld Pro Patient Self Administered Overnight Oximetry

Product Information

Specifications:

• Product Name: VPOD Handheld Pro Patient Self Administered Overnight Oximetry
• Manufacturer: VirtuOx
• Usage: Monitoring blood oxygen levels while asleep

Product Usage Instructions

Test Setup:

1. Follow the test conditions as prescribed.
2. Attach the sensor to the device as shown below.
   • Remove any fingernail polish and coverings from the finger you will be using.
   • Attach the sensor to the index finger and secure it with tape or a Band-Aid.
3. Hold down the power button until the device is powered ON.
4. Go to sleep and wear the device all night.
5. In the morning, remove the device and call the DME courier to pick it up.

Additional Instructions:

• If the sensor falls off during the night:

1. Replace the sensor on your finger.
2. Check if the oximeter is ON and displaying numbers.
3. If OFF, press the power button to turn it ON.

• If you wake up during the night and need to get out of bed, please carry the device. You may remove the probe only in case of hygienic necessity. You can use the probe on any finger, ensuring it feels comfortable and receives readings from the device.

Contact Information for Assistance:
For further assistance, please contact VirtuOx at 877-897-0066.

FAQ

• Q: Can I use the device on any finger?
  A: Yes, you can use the probe on any finger as long as it feels comfortable and provides readings.

• Q: What should I do if the sensor falls off during the night?
  A: If the sensor falls off, replace it on your finger, ensure the oximeter is ON and displaying numbers. If OFF, press the power button to turn it ON.

• Q: How long should I wear the device?
  A: Wear the device all night while you sleep, and remove it in the morning before calling the DME courier for pickup.

VPOD Handheld Pro Patient Self Administered Overnight Oximetry

Instructions

Patient Name:_____
Reading ID:__

• Your prescriber ordered this oximetry test to monitor your blood oxygen levels while you are asleep.
• It is vital you closely follow these instructions to get the best results.
• VirtuOx is the testing facility that will process the test results and send them to your prescriber. Per Medicare guidelines, the company that delivers the testing device to you cannot assist with the instruction or performance of the test.

DME Courier:____
Phone:_____

Please follow the conditions below as prescribed:

IMPORTANT
You must stay awake during the first 10 minutes of the test.

• To create the best outcome we would also like to ask a few subjective questions about your sleep and cardiac issues you may have.
• Scan the below QR code with your smart phone. Enter your information into webpage.

TEST SETUP

1. Follow the test conditions above.
   Remove any fingernail polish and coverings from the finger you will be using.

2. Attach sensor to the device as shown below.

3. Attach sensor to index finger and apply tape or Band Aid to secure sensor to your finger.

4. Hold down the button until the device is powered ON.

5. Go to sleep. Wear the device all night.

6. When you wake up in the morning, take the device off. Then call the DME at the phone number above to pick up the device.

ADDITIONAL INSTRUCTIONS

• If the sensor falls off during the night:
  • Replace the sensor on your finger.
  • Check to see the oximeter is ON and displays numbers.
  • If the oximeter is OFF, press the power button to turn it ON.
• If you wake up during the night and need to get out of bed, please carry the device. You may remove the probe only in case of hygienic necessity.
• You can use the probe on any finger. Make sure it feels comfortable and receives a reading from the device.

FOR FURTHER ASSISTANCE, PLEASE CONTACT VIRTUOX AT 877-897-0066.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>